Why spinning does not work

As planned by the manufacturers, laundry leaving the washing machine should be slightly damp. This rule is valid even for those devices that are alien integrated drying function. If, as a result, things drip and drip even after a two-hour sweep, it becomes clear — spinning system does not work in the washing machine. The question can not be allowed to drift.

Reasons why spinning will not work in a washing machine

There are several factors that influence the quality of the pressed laundry after the process is completed.Some of them are commonplace, others claim serious damage. It is important to consider all:

• wrong choice of program;
• malfunction of the drain system;
• problems with collector brushes;
• breakdowns in the program part;
• overheated TEN;
• overload of linen;
• broken tachometer;
• engine malfunction.

Factors are divided into simple and complex, but any of these points requires diagnosis and resolution of the issue. However, before figuring out exactly what happened, the device must be disconnected from the power supply and checked for water leaks. It is possible that there are some mechanical damage. When the preparatory work is completed, you can proceed to a detailed study of what happened.

Washing machine device

Simple breakdowns and incidents in the work

Software settings

By their conditions, modern devices are close to computer devices - it is the program part that guides by many criteria in the work. In case of choosing the command “gentle wash"And spin will be easy (for silk, wool and other similar textures). In this case, things will remain just wet, but they will retain their integrity, for example, if required by fastidious fabrics.And some models exclude these programs or have special modes in such conditions (the instruction will tell about everything in more detail).

There is also the banal forgetfulness of the user who forgot to turn on this mode or deactivate it. Here you can only blame yourself.

More does not mean better

Sometimes the desire to understand at once with large portion of linen turns around with push-ups. Such a pattern is often noted owners Indesit washing machineAnd a similar phenomenon is connected with the fact that the apparatus is simply can't spin the drum. And the technique "does not give up": it will make several attempts, but the result will still be wet things. What can be done here? Just start the program again, but with a smaller amount of laundry.

The second moment - things just poorly distributed inside the drum. Such an imbalance must be corrected manually, scattering the resulting coma. All users of such units should learn: overloading only reduces the life of the washing machine. It is much more logical to divide the pile of accumulated dirty things in a phased process.

It's all about the sink

It is the fault of the drain pump that spinning does not work on your washing machine.This is easy to understand if you look into the hatch and notice the remaining water there. There are two options for the original breakdown:

• broken drain pump;
• clogged filter or pipe.

There are a few more signs indicating that the drain system is faulty:

1. Premature unforeseen shutdown.
2. Noisy water draining with extraneous characteristic sounds (champing), which is especially characteristic of Candy;
3. In the washing machine, the task is not performed in certain modes (that is, the washing machine does not include the corresponding function only with some commands).

Drain filter

To eliminate the defect, you need to check drain hose contaminated: maybe he just huddled. By the way, the creaking and knocking may indicate a blockage. If the inspection results are negative, the next object will be drain pump. Here you need to perform such step-by-step actions:

1. Unscrew the filter and turn on the device in the network.
2. At the same time it is necessary to activate push-ups, not including water. For many devices, for example, Samsung, this is achieved by pressing the appropriate button.
3. Now we carefully observe: if the impeller turns on the pump, it means that it is fully functional.

The discharge is more difficult

Diagnostics of brushes at the engine

The next "suspects" will be worn brushes engine Their diagnosis depends on the model of the device: if the Lg washing machine does not have semi-dry laundry, you will have to disassemble the whole body of the unit (the main thing is to remember what follows). When visually inspecting the collector brushes, their deterioration will become clear: it will be sufficient to measure the length, which should be 5 centimeters. Spent your brush is required to replace.

Software fault

More precisely, her electronic modulewhich manages the software part. Here is the control of all processes of the machine. Independently hardly able to reflash the system, and replace this device. It is best to entrust this business qualified professionals.

Problems with the drain sensor

Failure in the system may be due to the failure of a special sensor. It will not give the desired signal and, accordingly, the mode will be ignored. This detail (another name - pressostat) it will be impossible to repair - it will only have to be changed, moreover, to a knowledgeable and experienced specialist.

"Slept" TEN

Your "washer" is a very smart assistant, especially when it comes to Bosch devices. And if in the process water will not be heated to the desired temperature, the technician will not give the appropriate signal about this to the electronic unit. The result will be a spin off.

Tacho Sensor Breakdown

The detail is intended to regulate speed in work. Usually it breaks when overloaded. To test this assumption, you must follow this step-by-step instruction:

1. The sensor is located on the corresponding generator. Its location is slightly lower than the rotor, on the motor shaft.
2. You should check this item for availability. external damage or bad fasteners.
3. The wiring and the contacts are being checked, they may have to be cleaned and isolated.
4. If none of the above is confirmed, replacement parts are carried out.

Tachometer on generator

Very hard case - engine failure

Finally, perhaps the breakdown lies in the operation of the engine itself. One thing remains: disassemble the machine body and dismantle this item. Then every component is checked - this is the only way to understand the essence of what happened. Read how to check the SMA engine. here.

How to prevent a problem

So that there are no questions why spinning does not work, some situations and breakdowns can be prevented by proper operation. It is important for users to heed the warnings:

1. It is worth to train yourself every time before laying the linen check pockets things for the presence of foreign objects.
2. The machine should not come into contact with other electrical appliances.
3. Fraught reboot apparatus things whose weight exceeds that indicated in the instructions. For example, for the Candy brand, it is simply disastrous.
4. To prevent damage to the electrical part of the device, it is necessary to protect it from drops in the network. At Bosch devices it is especially important, considering the high cost of their repair. This is done with the help UZO installations.

Each device owner chooses himself: stay one on one with a breakdown and squeeze out manually, or carry out appropriate measures for the replacement and repair of defective parts. And with proper operation, many incidents with flowing water from the laundry simply will not work.