Why the washing machine does not turn the drum

Did you add water to the machine, plug it into the net, fill it with detergent, and the washing machine does not turn the drum? The situation is not pleasant, but such a problem is quite often encountered not only in Indesit, but also from other manufacturers. What are the reasons, and what to do in this case?

Breakdown diagnostics

So, first you need to stop panicking, because this case certainly will not help. The first step is to disconnect the washer from the mains. Then drain the water manually, using a special filter, clean the drum from the laundry and deal withat exactly what moment the washing machine did not “want” to turn it:

1. In the process of spinning. In the event that the laundry is damp but not clean, we can say that the problem occurred during the spin cycle.
2. In the process of washing. In that case, if the laundry turned out to be soapy, then, most likely, the problem appeared in the process of washing. Try to spin the drum with your hand and check if it is jammed.
3. Drum at the washing machine rotates by hand, but not in the process of washing. If there is such a problem, then it must be considered comprehensively, because there may be several reasons for this:

• Belt malfunction.
• Worn motor brushes.
• Electronic module malfunction.
• The problem with the programmer.
• Motor breakdown.

Overload laundry

If the drum does not rotate, the first step is to review the amount of laundry that was loaded and try to load only half. Virtually every modern machine is equipped with special sensors that signal the excess of the norm by displaying an error code on the display, or by means of sound signals. In the event that you do not have a screen, the problem can be determined by the fact that the spinning drum simply stops.

If you have, for example, an old Aristoni machine, it has earned with half of linen, then you can breathe out with relief, because there are no problems with its performance. The main thing is to comply with all recommendations from the manufacturer and try not to exceed the norm, then the washer will serve you for a long time.

In fact, there are a lot of reasons why the washing machine refused to turn the drum.

If the tank is spinning by hand

When you can turn the drum with your hand, but during washing it does not do this, you should consider a number of frequent faults that could have caused this.

The power unit drive belt broke

The most common problem in the case when the washing machine does not spin the tank - belt wear drive of the power unit, because of what it can loosen slightly or even break off. Whatever it was, and it must be replaced. Sometimes the belt is in order, and you just need to return it to the pulley from which it slipped. To do this, you need to remove the cover on the back of the washer and look at the belt. If he just flew off, you need to put it on again and start the machine again. In case of damage, replace with a new one. Why the belt flies - read here.

Software module malfunction

Can also break software module. If the problem lies in this, then during washing it simply does not give a signal that the machine has started to rotate the tank. In order to remedy this situation, it is necessary to enlist the support of a master who can “flash” the software module or replace it with a new one.

The problem with brushes on the electric motor

If the machine does not turn the drum, then it is possible that the problem lies in the breakdown of the power unit or the wear of its brushes. This is especially true in cases where the device is very often subjected to loads or the model is rather outdated. When the brushes wear out, they need to be changed. I am glad that their cost is not high enough, but replacement process as simple as possible.

Malfunction of the power unit

A broken power unit can also cause the drum to stop spinning. Despite the fact that this does not happen so often, this failure is quite serious. Moreover, problems can be quite a lot: he may buzz or not give any signs of life. In this case, it is better to seek help from a specialist.

The power unit almost always does not work for the same reason - leakage.

Some experts, to find out if it is working, connect it directly to the electrical network.

The drum in the washing machine is stuck

If the drum starts to jam and you can not scroll through it with your hand, it means that a foreign object is stuck in it. Sometimes the cause is a breakdown of a particular part.

Foreign object

A twisting tank can stand up tightly due to such a common problem as the presence of a foreign object that has entered the space between the drum. Because of this, its normal rotation is impossible. The most common reason for this is coins or other items that were in your pockets. In order to remove them, you must remove the back cover, unscrew Heating elementthen try to get a foreign object through the hole.

It is highly recommended to check all pockets before sending clothes to the machine!

Drum bearing failure

If the drum of your washing machine does not spin, the reason for this may be wear or complete destruction of the bearing. This happens in the following cases:

1. Bosch washing machine, the drum is not spinning,can be quite old, due to which the bearings have exhausted their operating margin.
2. Frequent use of additional chemistry, which removes plaque and at the same time adversely affects the oil seals.
3. If the washer ceases to turn the tank, then the problem may lie in the glands that have never been lubricated, because of what they dried up, and the water fell on the bearings.

Any of these reasons may affect bearing destruction. The washing machine at this time is buzzing, but not twisting. In order to replace these parts, you need to get a serious professional tool. This is due to the fact that it will be necessary to almost completely disassemble the machine. If you are not confident in your abilities or do not have the skills and tools for this, it is best to use the services of specialists.

It should be noted that some models of machines are not designed to replace this part, so you have to buy new equipment.

The washing machine drum is spinning badly.

So, if the drum does not spin in the washing machine at all, then everything is clear with the problem. And what if he is very turns badbut still does it? Experts associate this with long operational period apparatus. That is, you must be prepared for the fact that the machine may soon break.

There are several reasons why the drum does not spin in a washing machine or do it with difficulty:

• The bearing life has expired;

• the presence of a foreign object;
• worn belt;
• problems with the power unit.

In any case, if you have a drum jammed in a working washing machine, it began to spin worse or refused to do it at all, you must immediately stop its operation and contact a specialist to identify and correct the problem.