The reasons for the poor rotation of the drum washing machine

One of the most frequent problems in the operation of the washing machine is the complete or partial breakage of the drum, due to which it starts to spin badly or don't rotate at all. In this case, determining the cause of the malfunction is the most important step, which will determine further action. To the most common reasons for which bad turns washing machine drum, relate:

• overload of linen;
• damaged engine drive belt;
• engine breakdown;
• malfunction of the carbon brushes of the electric motor;
• unbalance of the drum mechanism.

Self-determination of the cause of failure

Before you begin self-diagnosis, it is important to answer the question: is the drum spinning tight when it is washing or not spinning at all?

Spinning tight

Possible reasons:

1. overload;
2. unbalance of the drum mechanism;
3. the presence of foreign objects between the tank and the drum.

If your drum mechanism does not rotate well when washing laundry, then a possible reason for this is overloading. Open the manual and specify maximum weight of linenfor which your machine is designed. Many modern models do not start their work if the weight of linen exceeds the maximum allowable.

In the event that noticeable problems with rotational speed begin at the stage of spinning the laundry, a possible source of malfunction lies in the imbalance in which the washing machine cannot gather enough turns to complete the work. Check out are things evenly distributed over the entire surface of the machine.

Another common problem with a washing machine malfunction is hit by a foreign object into the space between the tank and the drum mechanism. This is what can interfere with the normal functioning of technology.

Does not rotate at all

Possible reasons:

1. failure of the drive belt;
2. damage to the carbon brushes;
3. engine breakdown.

When the machine starts its work cycle with a full or unbalanced drum, it is possible that drive belt jumps off or breaks. In this case, you can make an independent replacement or belt tension.

The tension of the belt drive should be brought to such a level that when you touch it you can clearly hear the ringing sound.

In case the problem lies in carbon brushesat least one of them should be charred. If the machine has worn out the brushes, you can make an independent replacement. To begin, remove the electric motor and then replace the worn carbon brushes with new ones.

It is possible that a malfunction of the engine is the main reason why the drum in the washing machine stopped spinning. Breakage winding or short circuit - a rather rare situation faced by home appliance owners. In this case, it is not recommended to try to make an independent repair. It is better to entrust this business to professionals.

Tips for avoiding possible damage

When working with a washing machine should follow a number of important rules to protect the drum mechanism from possible malfunctions.

1. Clean pockets of clothes before washing.
2. Observe the maximum allowable amount of laundry.
3. It is not necessary to forcibly rotate the drum mechanism if it has failed.
4. Use with extreme caution. descaling agents.

Following these simple guidelines and general car care rules, you can reduce the risk of breakdowns in your washing machine and ensure it has a long service life.