Features of the work and repair of the washing machine Indesit

The Indesit brand washing machine has gained worldwide recognition not only for its laconic and interesting design: the functionality of this device is perfectly combined with its relatively inexpensive cost. However, not every user knows all the subtleties of the work of his "assistant". For the prevention of breakdowns useful information about signs of faults and the possibility of their elimination.

 Indesit machine

Overview of the capabilities of the washing machine Indesit

Devices of this brand are not distinguished by too many electronic “frills”, however, this makes them popular and understandable for the consumer. Such simplicity does not affect the quality of washing, and even a person who communicates with appliances cannot understand the simple settings.

The range of washing machines Indesit is very wide, as well as the diverse range of programs presented in them.

Of course, basically, the wash is done on one or two popular programs, but according to the manual the device is able to wash the dirt in such modes:

  • heavily soiled white things;
  • mixed clothes;
  • colored things;
  • non-fading synthetics of the average degree of contamination;
  • woolen things.

 White washing machine

The same instruction will tell you that mode control can be carried out using either buttons or manual toggle switch (again, it all depends on the model). But only the possibilities of the washing machine of this brand are not limited to:

  1. Manufacturers have provided the unit with the capabilities of half and reduced load of linen. It helps to save water and electricity.
  2. Spin speed can be reduced - this is a very good “news” for linen and cotton items.
  3. If you need to rinse more things, you can use the command “Extra Spulen”.
  4. It is better to wash delicate fabrics in cold water - appropriate commands are also provided for this.
  5. Conveniently, if you wish, you can turn off the spin and stop the machine itself (even if there is already water and linen in it).

Such bonuses create additional comfort from working with such a device. However, the balance may break washing machine faults Indesite, about the characteristic features of which it is better to know in advance.

 Washing Modes

What you need to know about the breakdowns in the washing machine Indesit

Of course, not every one of us is a repairman for washing machines, but one can suspect failures in the operation of one’s own device on several points:

  • unstable operation of the device;
  • independent “life” of detector lights on the dashboard;
  • error code on the display with the letter F;
  • traces of leaks;
  • smell of burning wiring or even smoke
  • poor quality of washing;
  • increased foaming.

Users can use the following algorithm for diagnosing the device and troubleshooting ways:

  1. If a the machine does not turn on and does not give any response to the commands, it may have been damaged cord, there is no contact in the start button or the plug is out of order. Another item on this list is a door that is not fully closed. To repair, it is enough to replace the relevant parts or just try to re-close the door.
  2. If a delayed washing time and the modes stopped working correctly, you can suspect a malfunction of the heating elements. You can check the incorrect operation of electronics with the help of appropriate electronic measurements (according to the results, some of them will be replaced). About how to check the heater, it is written here.
     Voltmeter check
  3. From cars are heard loud noise and crash? The problem is in the mechanical components of the device. There is a possibility that there is a damaged gland in the device, a bearing has failed or shock absorbers are worn out. Another problem is the loosening of the attachment in counterweight.
  4. "Moods" the drum that suddenly stopped spinning, put under suspicion the condition of the drive belt and motor. This may be related to the failure of the programmer. In any case, it is necessary to check the integrity of the entire supply chain.
  5. In case of problems with the bay and water drain suspicion falls on a drain system with filters and a pump with a check valve. However, errors in the electronic part of the device are not excluded. Diagnosis involves checking the door microswitches and wiring integrity (from the lock to the loading door).And also it would not hurt to check the reliability of closing the door itself (it is possible to change the lock).
  6. At leakage obvious violation of the tightness of the door. Another reason could be cracks in the drain and intake hoses. Here you can repair your Indezit washing machine with your own hands - replace the gasket and hoses. The voltage applied to the contacts of the lock, which is responsible for locking the door, is also checked.
     Hose replacement
  7. If a spin mode is unstable, the fault lies in the system itself switching programs and modes. But there may also be a breakdown of the tachoindicator. It is recommended that the switches be replaced and a tach indicator inspected.
  8. The smell of burning wiring categorically states: a short circuit has occurred in the circuit, and the heating element may have broken, and it needs to be to replace. If the user does not have the appropriate qualifications, the idea of ​​self-repair with their own hands is best given up and call a specialist.
  9. Foamy "party", which was arranged by the washing machine - a reason for excitement. It is possible that a powder not intended for an automatic device is used.
  10. While working going on strong vibration? This means that the laundry is not distributed correctly or there is a bias in the installation.
  11. If there are extraneous sounds during the washing process, they can be caused by solid objects falling out of the pockets from the pockets.

Any damage is easier to prevent than to fix. That is why it will be relevant to observe a set of certain measures to prevent such situations.

 Foam from the door of the machine

Recommendations for the prevention of the device

Any technique requires careful treatment. Users to listen to these tips:

  1. Before washing the lace underwear and bras should be placed in special bags. And all the metal fasteners and buttons must be fastened.
  2. Unloaded laundry should not be pinched by the door - this can damage the sealing rubber and cause subsequent water leakage. In the future, this is fraught with a break in the drive belt and even an impact on the controls.
  3. Things in the washing machine brand Indezit can not be laid above the norm (no matter how strong the temptation to wipe everything and did not immediately move you). It is better to wash them in parts.
  4. High humidity in the room can adversely affect the operation of electronics. Also in this case there is a risk of corrosion.
  5. After the device is completed, it is better to disconnect the device from the network - this can prevent the device from failing due to voltage drops. The insurance will be additional washing machine connection to surge protection device.

Those who wish to carry out repairs on their own will benefit from the following video tutorials on instrument repair:


Despite proven reliability, even the most expensive washing machine can break. Appropriate respect for the device, knowledge of the procedure for carrying out simple diagnostics and simple repairs with their own hands will give the device a chance to once again regularly serve its owners. Otherwise, you will have to spend a lot of money on professional diagnostics.

Comments: 0
Continuing the theme:
Ratings

Rating washing machines for quality and reliability. Ten best stand-alone models, their features and important technical parameters. Advantages and disadvantages, the price level.

Video camera

Home cinema

Music Center