The main causes of poor spin clothes in the washing machine

The washing machine has become one of the main components of all household appliances, which is used in every home, regardless of the level of wealth. This is an indispensable tool for housekeeping, but each technique has its own resource. Sooner or later, we are faced with the moment when the washing machine does not squeeze the laundry badly. There are many reasons why technology fails.

Why the car became badly pressed

A very unpleasant moment, when upon completion of washing a sufficiently wet laundry is found in the drum. It's a shame, but this process cannot be monitored during washing. So, what can affect low-quality spin clothes?

1. Defect made at the time of assembly.In this case, the spin function will work poorly in the implementation of the first wash.
2. The excess weight of the maximum possible load established by a certain washing program.
3. Invalid parameters for this function. By default, spinning at low revs can be programmed.
4. The machine is loaded with things with different density of fabric. For example, knitted clothes with thick cotton.
5. Water remains in the drum after washing. and rinsing. In this case, the drain valve or hose that blocks the flow of water after the main washing steps have been completed may become blocked.
   

6. Exhausted resource of some details. Should alert the appearance of a stranger noise while the machine is running. The main reason is bearing wear. Also, noise may occur due to the presence of foreign objects between the drum and the tank that have got into the wash with things.
7. Motor malfunction. The problem in the engine may appear at the time of wear brushes, which does not allow to develop the number of revolutions sufficiently.
8. Damaged tachometer. The item often fails due to regular overload of linen.
9. The problem with the pump.The following observations will help to understand that a breakdown of this particular part of the vehicle has occurred: drum can not gain momentum; after completion of the washing phase, laundry is left in the drum, submerged in water; a start of water discharge is heard, but the process either does not start or is not sufficiently developed.
10. Malfunction modular control. A problem with electronics can be caused by a power surge in the power grid.

What can be done before calling the wizard

If you are not satisfied with the washing process, because the machine has become badly pressed, you can try to fix the problem yourself. For these purposes it is necessary to do the following:

1. Exclude the fact of overload. After completion of the process, disassemble the pressed volume of things, divided into 2 parts and repeat the spin for the second time.
2. Clean the drain outlet.
3. Wash things after sorting. Eliminate the presence of foreign objects in the pockets.
4. Separately load things from coarse fabric.
5. Run a repeated spin program, reducing the number of items.
6. Qualitatively squeeze the machine can evenly distributed underwear. If one volume item is erased, it is better to add a few less volume items in addition.For example, a badly squeezed blanket can be run on a re-spin by adding a couple of towels.
7. Disassemble the machine. Remove the heater and make sure that there are no unnecessary items. Check bearings, if there is a defect, replace parts or have them repaired.

Cases when the machine is subject to repair

If the washing machine, after carrying out preventive measures and using different configurations of the load, is still badly squeezing the laundry, then the reasons can be serious, and the technician should be repaired by a specialist. The workshop should contact in the following cases.

1. Crash software. The machine does not work according to the specified mode.
2. Engine breakdown. The cause may be a belt and brushes. The master will establish a specific problem after disassembling the housing of the washing machine.
3. Worn bearings, required their replacement.
4. The problem of the pump can be solved by installing a new one.

Recommendations for servicing washing equipment

Why does a washing machine become unsuitable for washing over time? It depends on many factors, and is often associated with misuse. Before starting the first launch of the equipment, it is important to familiarize yourself with the instructions, useful tips, and the characteristics of the installed programs.

If the wrong program mode for a certain type of fabric can affect the quality and appearance of clothes (change in color or shape), then an incorrectly loaded volume of linen leads to failure of the technology itself.

It would not be superfluous to check before loading for the presence of foreign objects both in the laundry basket and pockets, and in the drum itself. This is especially true for those who have small children: in their pockets can be candy, chewing gum, penny. All this leads to serious problems.

Laundry detergents with a high content of abrasives can damage water level sensorwhich is very important when performing the spin function. Careful treatment and compliance with the rules of operation will extend the life of the washing machine.