Why the washing machine stops pressing the laundry

If the washing machine is out of order, then this is a problem for the whole family. After all, we are so accustomed to automatic washing that we cannot imagine a day without this assistant, especially when there are small children in the house. Why the washing machine does not squeeze out the laundry, that is, the spin mode starts, the drum rotates, but things still remain wet? There are many reasons for this, and we will try to make out every detail.

Drum imbalance

When loading you put too many voluminous things in the washing machine, and during washing they accumulated in one place.When switching to spin mode, the speed increases significantly, an imbalance begins, and a special sensor disables the rotation of the drum. What to do? Turn off the power, open the door and pack things more evenly. You can remove the most difficult and then squeeze the water out of these things separately.

Program error

The washing machine stopped pressing because program set incorrectly. Quite often, users push another button in a hurry, and then resent that the laundry is wet. Be careful, and your assistant will perform the task.

Filter blockage

If the filter is clogged in the washing machine, it meansthere is no water drain. This problem is easy to handle: you just need to get rid of the blockage. The filter element is at the bottom right, for this you need to open the flap or open the decorative panel. It all depends from model:

• Indesit hatch panel is made of very fragile plastic, it must be opened very carefully.
• In Samsung, there are special latches that open with a screwdriver.
• LG Luke just does not open, you need to press a special key.
• Ardo has access to the filter also from the front, but from the bottom.

All filters are unscrewed in the same way, only on some models there may be fixing screws. You must carefully inspect the cover before trying to unscrew it.

Having access to the filter, you should carefully clean it and set back. Check the performance of the machine: perhaps the cause of the problem has been found and the spin has worked.

Worn appliance, automatic system failure

Why the washing machine does not squeeze? There are a number of nuances relating to different models. For example, LG or Samsung washing machines when the filter of the drain pump is clogged signal to display.

If your typewriter has been around for many years, then when the spin mode starts, it’s better to be around and watch how it erases, so that if necessary it can intervene and preventwater leak.

There may be cases when household appliances do not cope with the task or there was a failure in the automation of the system, for example:

• there is no liquid drain from the drum and the system turns off the mode;
• in the process of washing, the drain works properly, but after it is finished, all things are wet;
• water drains, but very slowly;
• spinning on other modes then works, then - no.

The reasons for the failure of the spin mode can be different and the degree of complexity, so it is quite problematic to fix the problems yourself.

Serious damage

There are malfunctions of household appliances that can only be solved by specialists from the service center. For example, the washing machine has stopped pressing because of tachometer failure - electronic equipment as a whole is intact, but it will be difficult to eliminate such damage without certain knowledge.

Water level sensor

In technical terms - pressostat, transmitting to the main module all the data on the water level. After receiving the report, the automatic system decides when to turn on the spin mode; if there is no signal from the sensor, then spinning will not turn on.

In this case, you must contact the repairman. He will come, inspect the machine, and if necessary install a new sensor.

Engine speed sensor

The tachometer is mounted on the motor shaft and controls the revolutions per minute. If it is faulty or the wiring is gone, then the signal to the automatic system will not be received. Turnovers remain the same, so squeeze underwear will not work.

There is a very rare failure, but it can be eliminated on its own by checking the mounting and contacts. If this test is negative, the sensor must be replaced.

Engine failed

From the work of this unit depends on the livelihood of the entire device. It may cease to function due to open or short circuit windingwhen erased to a minimum value brushes made of graphite. If for this reason the washing machine does not squeeze out the laundry, then you will have to call the workshop - the specialist will check the system, replace the brushes or install a new engine.

Electronic module

If the washing machine does not spin, then the reason may be control module — failed stabilizer. The brain of the product cannot give the right commands: in this case it ignores the spin mode, although the machine works. Call the wizard, he will confirm the diagnosis, replace the stabilizer or re-flash it.

In no case should you try to repair the engine yourself or change the stabilizer on the advice of a friend. Remember that the miser pays twice.

Drain pump

Statistics assert - it is often the pump that fails, especially on budget versions of machines, where there is no filter element in front of it, and any foreign object, such as a bone from a bra, can disable the pump.It is possible to determine whether the pump is guilty of this by very characteristic signs:

• washing mode is over, but there is nothing but a strange sound of champing;
• it seems that the discharge of water will now begin, and the machine will switch to spinning, but it will freeze;
• time goes on, but everything stays the same - no spin laundry.

It is necessary to contact the workshop again, the pump will be replaced, and your pet will be like new: you will not have to squeeze out the clothes manually.

Proper operation

In order for household appliances to let you down as rarely as possible and not hang at the most inappropriate moment, you should treat it very carefully and follow the following recommendations:

1. Check all pockets before washing - small parts can clog the filter.
2. Install a voltage adjustment filter in the apartment. It often changes, and electronics is the first to suffer. On the rules for choosing a machine for a washing machine, read here.
3. Powder that dissolves in water, you need to fall asleep strictly according to the norm: the excess will accumulate in the dispenser, clog the grid.
4. You can not overload the car, the imbalance sensor will disable the maximum speed.

Replacing electronic components is a very expensive “pleasure”; there are times when it is cheaper to buy a new technique than to replace a certain unit.

By following these tips, you will save yourself from the hassle and expense of the family budget, and you will know what to do in each particular case of failure of the washing machine.

Preventive action

One of the best ways to extend the quality work of your assistant is to prevent the unpleasant consequences of sudden failures. We must not cease to care for the machine after each wash.

This procedure is quite simple and will not take you much time:

• remove the dispenser and rinse it off any residual detergent;
• rinse the dispenser installation site and wipe dry;
• wipe the cuff on the door to prevent the accumulation of various debris after washing (threads of linen, grains of powder and other things);
• do not immediately close the door - let the drum and all the insides of the washing compartment dry out;
• Do not wash the inside of the drum with special detergents.

A caring hostess will always do a wet cleaning in the room after washing and will air if it is possible, in many private houses the laundry is located in the basement. It is also worth inspecting the machine for leakage, even the most insignificant, because small defects quickly develop into large ones. You can find out more about prevention for a washing machine. here.

There are many problem areas in any household appliances, but one thing to remember is to never try to make a self-diagnostics or repair a washing machine.

Modern technology of this level is so crammed with electronics that any careless movement of yours can have irreversible consequences. Trust the professionals, and your assistant will delight the whole family again with high-quality washing and quick spin.