How to lengthen the drain hose for the automatic machine

When buying a new typewriter or transferring an old device to a new place, there can often be problems with connecting it. The drain hose that comes with the washing machine may not be long enough for proper installation. To properly lengthen the drain hose of a washing machine, you need to be aware of a number of important rules before proceeding with this procedure.

When do you need lengthening

As a rule, a standard washer, for example, a Samsung model, is usually equipped with a drain hose, the length of which does not exceed one and a half meters, and in most cases it is quite enough for proper installation. But if the area of ​​the bathroom is larger, or the location of the sewer pipe does not meet the standards, the length must be increased.To solve the problem, specialists usually simply extend the tube using some methods.

Lengthening can be done by buying a new hose to replace the previous one, and changing it completely. In the process of this procedure it is necessary to disconnect the details of the device, their purpose depends on the specific model of the washing machine. Removing the drain hose is difficult: if the machine does not belong to the standard type, you have to remove the front panel. This option can not be called simple, so many owners automatic machines prefer to purchase an additional hose complete with a connector. This method is much simpler and less expensive.

Hose complete with connector

How to determine the length

If you definitely decided to purchase a drain hose designed for your washing machine, you should pay attention to the appliance stores or plumbing. It is best to measure before buying. initial lengthu and the missing part, so as not to be mistaken with the choice. With the help of a tape measure you need to take measurements, presenting in advance how the finished hose will run from the base of the machine to the pipe. For reliability, it is worth leaving excess partso that it is not stretched.

A standard modular hose is usually divided into sections up to 0.5 meters, depending on what length you need, just ask the seller to cut off the desired part. In some stores you can find ready-made options with the desired length, while they will cost a bit more expensive.

You should not think that only the longest hose can solve the problem; in fact, its maximum length should not exceed three and a half meters.

In addition, you must definitely purchase a special connectornecessary for reliable joining of two ends. This is a standard plastic tube, into which both ends are inserted before the tightening procedure with clamps.

Drain hose connector and hose clamps

Carrying out the procedure

First of all, it is necessary to make sure in advance that you have all the necessary details. This list includes:

• hose for lengthening;
• special connector;
• clamps for fastening;
• screwdriver and other necessary tools.

First you need to wear hose clamps on the ends of both hoses, then insert the end of the one that is connected to the washing machine into the connector on one side.The new hose is fixed on the other side; now carefully tighten the clamp with a screwdriver. The fixation does not present any difficulties, you just need to make sure that it does not crawl off the connector. After the end of the process, the machine can be connected to the sewer, and then to test work during the wash. When the machine drains the water, see if the joint will leak. Such a problem usually occurs if the ends are loose, and water seeps through the holes, but it is quite possible to prevent it at the work stage.

If you do not want to waste time and lengthen the drain hose, removing the old one, this method will become the most convenient option and is suitable even for those who have never performed such a procedure. Proper organization water drain - the key to your peace of mind. This will help to avoid water leaks from under the cars and unpleasant smellcaused by stagnation or draining of fluid from the sewer system.