Symptoms and error codes washing machine Gorenje

Washing appliances Burning (Gorenje) is known for its impeccable quality and functionality. However, even such reliable devices can sometimes break. Find out the cause of the fault will help washing machine diagnostics. Most often there is no need to purchase a new device, but it is enough to fix the equipment with your own hands or to contact specialists. We will get acquainted with the main symptoms of the problems and understand how the Burning brand washing machine itself informs users about the malfunction that has occurred.

Weak parties

As a result of improper operation or installation, wear and tear of parts and the use of unsuitable detergents, there are breakdowns of the washing unit. Let's get acquainted with the most obvious types of problems that violate the usual course of washing machine Gorene:

1. Drain mechanism or pump. These elements quite often become useless. You may notice how some of the characteristic features appear: water intake and discharge are poorly performed, water stagnates in the tank. The reason is mainly clogged hoses and other elements.
2. Sometimes when washing you hear a knock or noise, or there is a strong vibration. In this case, it is most likely that drum clogged up foreign objects, or bearings have become unusable. In both cases it is necessary to deal with the problem as soon as possible.
3. If you find that the machine began to cope poorly with the spin cycle, then the reason for this is most likelyproblem with belt. He holds the drum while spinning, and most likely has flown off. This problem is easily solved, but an experienced master should perform the repair procedure.
4. In the case when the unit refuses to turn on or display indications, it is necessary to produceelectronic module check and timer programmer. Such defects are typical for mechanical wear or in the case of water ingress into the case.
5. If the water is in the engine, it will cause smoke and sparks, and may also cause a short circuit.If you observe such manifestations, then disconnect the device from the network and do not resume work until the arrival of a specialist.
6. If the water does not heat up properly, then the problem isat heating element. This may be due to scaling or heater burnout. To repair this item should be treated with special attention.

Careless attitude to the washing machine can lead to mechanical damage that does not always affect its operation. However, if you do not take measures to eliminate them, they can get worse and cause a lot of trouble.

If there is a crack in the glass of the hatch, the door handle is damaged or the body is deformed from the dent, you must invite the wizard to fix the problem. 

Gorenje error codes

Knowledge of the main signs of faults will help to take timely measures to eliminate them. WITHthere are special washing machine error codes Gorenje, with which the device informs the user about the occurrence of an error. Understanding the values ​​of the code used for the notification will facilitate the task:

• F1. You will see such a designation if a short circuit or a power failure occurs.
• F2. The hatch must be tightly closed. If it remains ajar or the control contact did not work when closing, then such a code will inform you about it.
• F3. This value indicates a very small amount of water in the tank, that is, even the first water level was not reached during filling.
• F4. The value indicates the absence of signals from the drive motor or the impossibility of controlling its power.
• F5. This signal signals a break in communication between the controller and the inverter.
• F6. It reports insufficient water heating for a specified period of time, the temperature level is below the set one.
• F7. You will see this code if, when switching to drain mode, the water in the tank does not drop to the first level.
• F8. Speaks about too weak rotation of the drum in the spin mode.
• F9. Indicates that water has accumulated in the pan.

Based on the information obtained from the codes, you can decide on the method of solving the problem: whether it is possible to fix the problem on your own or you need to apply for service.

rules operation

It is within our power to eliminate the misuse of the washing machine and,thus avoiding the cost of service. Enough to adhere to the basic rules. Consider the most significant of them:

1. In the process of washing, use only high-quality detergents.
2. Watch the volume of things loaded into the drum, do not overload it.
3. Use only in rooms with low humidity.
4. Track and prevent foreign objects from entering the drum when doing laundry.

The Gorenje washing machine is distinguished by one convenient feature. She is able to exercise independent control over the implementation of a large number of functions in the process of washing.

If any malfunction is detected, the unit reports an error, accompanying it with a corresponding sound signal. Thus, the damage can be identified by the code and promptly begin to eliminate it.

Help experts

In most cases, it is better to contact the specialists and avoid self-intervention in the breakdown. Incorrect, unprofessional repair can only aggravate the problem. Experts will be able to accurately determine the cause of the breakdown, pick up original parts and repair the mechanism.

However, the symptoms may not always indicate a breakdown. Quite often, the cause of the error message may simply be improper operation.

For example, water may leak if the hatch is not tight enough, and the vibration may be due to improper installation of the device or uneven distribution of things in the tank during loading. Before contacting the service center, make sure that even under all conditions, the work proceeds incorrectly. Eliminating possible causes associated with operating errors, contact the experts in repairing washing equipment for help and advice.

Conclusion

It is necessary to carefully handle the equipment and look at its attempts to signal problems. A number of symptoms will help you to deal with the problem in a timely manner. It is not always necessary to appeal to specialists, as very often malfunctions occur due to elementary non-compliance with instructions for use. First of all, the possibility of improper operation should be excluded. If it turns out that the washing machine really needs repair,Be sure to contact a specialized service center, since non-professional intervention can only aggravate the situation.