The value of the error codes of the automatic washing machine Indesit
In modern technology, a system of blocking functions, and the termination of an active workflow in case of failure of a part or an entire mechanism. Washing machines released after 2000 have a definite indication of possible damage. Indesit models with electronically controlled error codes are displayed. automatic washing machine. Depending on the modification, each device has its own classification and fault display order.
Content
How is the problem determined?
Considering the year of production and the model range, the machine can give a different signal to the problem of starting or ending a full wash cycle. Indesit may be a combination. continuously flashing buttons. When a program crashes on the panel, the indicator can turn red and light up at intervals and blink the number of times equal to the digit of the code. In the technology of the new generation on the display will be displayed directly error codethat characterizes a particular failure.
As a rule, the technical documentation describes all the characteristics of possible errors and recommendations for further action.
List of main error codes displayed on the display Indesit washing machine, and possible methods of their elimination:
| F01 | There is a short circuit in the electrical circuit of the electric motor (often as a result of water flow) | Check for the presence of moisture on the contacts, terminals of the engine connector.
|
| F02 | Lost Tacho Signal | Inspect the engine, measure the resistance of the terminals of the coil of the tachogenerator (it should be in the range of 115-170 ohms) |
| F03 | Malfunction of the water temperature sensor in the tank | Is required temperature sensor inspection, checking pins with board connector |
| F04 | Simultaneous filing of two mutually exclusive signals "empty" and "overflow", indicating the breakdown of the water level sensor | Check serviceability pressostat and wires connecting it to the control module |
| F05 | Water does not drain from tank | Control of the entire drain system is required: the drain pump, drain hosenozzle |
| F06 | Invalid program | Error control panel keys |
| F07 | Insufficient heating capacity of the heating element | Measure Tenth Resistanceto inspect the pressure switch |
| F08 | Simultaneous, mutually exclusive signals: the water level sensor signals a full tank, and the PETN relay an empty one. | Ring the pressostat and teng terminals, check their contact wires. |
| F09 | Electronic module breakdown | Requires flashing or replacing ROM |
| F10 | Loss of signal from liquid level sensor | Pressure switch test and pressure switch required |
| F11 | Lack of communication with the drain pump | Check drain pump |
| F12 | Switching between display and control boards is faulty | It is required to ring the wires connecting both boards |
| F13 | Drying temperature controller failure | Check sensor resistance, connecting wires |
| F14 | Lack of communication with the sensor and Teng drying | Inspect the drying sensor, PETN, check the contacts |
| F15 | Teng does not turn off drying | Check Teng drying, pressure switch, drying relay |
| F16 | Drum locked | |
| F17 | Door lock does not work | Check hatch locks and controllers |
| F18 | Breaking the display board | Board replacement |
Note: F16 error appears only on models. vertically loadederrors F13-F15 - on machines with drying function.
What happens to the machinewhen electronics fixed control error? In the event of a malfunction, the following processes occur:
- The door is locked cars.
- The indicator flashes on the panel, giving an error signal. The meaning of the signal is detailed in the instructions.
- The machine door lock indicator light flashes.
Other causes of program failure and flashing indicators.
On the control panel, the LEDs can flash not only because of a fault, but also wrong parameters. There are a number washing modesthat provide the ability to connect additional functions:
- extra rinse,
- higher degree of heating water
- ironing
Instead of switching on, the indicator may flash if the selected function does not have one or another function.
The machine can issue a service error both at the initial stage of washing and during it. In cases where the weight of the load of linen is not comparable with the number of revolutions or the maximum allowable amount of laundry provided for by the technical characteristics, the spinning process may not start.In this case, the buttons indicating a failure in the “Rinse”, “Spin” mode, and the door lock indicator will flash. At the moment, you need to restart the machine again, reducing the number of things.
To be able to restart or change the program mode, just press and hold the start button.
After that, the execution of the specified program to stop. After a few seconds, the door will unlock, you will be able to make an adjustment and start erasing.
Flashing Codes
In older models, where there is no display, the error code can be determined by a combination of indicator lights. Depending on the control panel, each has its own definition. You can find out the error code corresponding to a specific combination of blinking, by the picture:
/rating_off.png)
Loading ...