Replacing shock absorbers in a washing machine

Dampers (dampers) of the washing machine are designed to dampen the vibrations of the tank during operation. They are located at the bottom of the machine and work on the principle of automotive shock absorbers. Over time, they wear out and stop performing their functions. Therefore, if you began to suspect that the washing machine has become vibrate more than usual or appeared loud knocking during the rotation of the drum, it is possible that replacement of shock absorbers is already required, since they cannot be repaired. 

Incomplete disassembly of the machine 

Fortunately, replacing the shock absorbers on the washing machine is quite simple, but first you should check them technical condition. This will require an incomplete disassembly of the washing machine to remove the shock absorbers from it.

There are models of machines that even disassemble is not required, they can simply be turned on its side,to access the details and nodes below.

From tools for partial disassembling a modern washing machine you need nothing but a pair of screwdrivers and pliers. And it does not matter at all whether the manufacturer of this machine is Samsung, Bosch, Indesit or someone else. The procedure for disassembly will be about the same for all brands. 

Sequencing:

Before you start, be sure to turn off the machine from the AC network, and turn off the water supply with crane. Inspect the technique. If she has a special back door to access the interior space, then disassembly should begin with it.

If there is not enough space in the rear hatch to disconnect or test the operation of the dampers, you will have to remove the front panel. To do this, first open the loading door for the laundry, and then remove the collar of the cuff, pulling the spring over it tightening it with a screwdriver at the bottom.

Bend the edges of the cuff and remove it. Do not forget to disconnect the block of wires of the lock of the lock of the hatch, located on the right in the center behind the cuff.

Open the dust filter cap below, unplug drain hose, unscrew the screw securing the cover and remove the cover. Beneath it will be found the bottom screw fixing the front panel, which also needs to be unscrewed.

At the top of the machine at the top, unscrew the two screws holding the cover of the washing machine, pull it towards you and remove it, while slightly lifting it upwards. On the features of removing the top cover on washing machines Indesit read here.

Remove the detergent tray from the front panel and unscrew the screws hiding under it. Then remove all the screws from the back of the control panel.

Gently lift the control panel up, release it from the clasps and place it directly on the washing machine from the top, without unplugging the wires.

Now you have access to upper mounting screws front panel. Unscrew them, slide the panel up, and then remove it.

Remove the plastic mounting pins from the top and bottom of the shock absorbers using pliers. Remove the shock absorbers from the supports.

Replacing shock absorbers in the washing machine with new ones and assembling them in the same way in the reverse order.

Check the operation of shock absorbers

Inspect the shock absorbers carefully from all sides. They must be straight and free from damage.

If, when squeezed, the damper compresses easily, and it squeaks at the same time, then it needs to be changed. Working part squeeze hands is very difficult.

It is desirable to buy new shock absorbers of exactly the same model or, in extreme cases, to take similar characteristics. You can buy or order the desired option online, if the local parts stores do not have the model you need.

As you can see, anyone can handle the replacement of the shock absorbers of the washing machine. You will need only one suitable screwdriver and a firm desire to save money on repairs or just do something useful with your own hands.