How to conduct a smart diagnosis of a washing machine brand LG

At last, the time has come when innovative technologies have reached domestic styralok. Robot vacuum cleaners with Wi-Fi function, smart watches, and now the possibility of smart diagnostics of washing machines from LG! Now with the help of a modern smartphone, you can immediately identify any problem. Consider in more detail what it is and how it works.

Smart Diagnosis application

If you have not serious problems, you will be able to cope on your own, and if malfunctions arise more complicated, you can still indicate the degree of damage to the wizard, and he will understand what parts and consumables you need to take with you.

Modern function SmartDiagnosis implies a remote diagnostic method. This is done as follows. On the smartphone you need to install the official application. It is universal and suitable for all modern operating systems: Nokia Software, Apple's IOS and Android. After the application is installed, you must enter the model of your typewriter. Further, following the instructions, enter a special code, bring your smartphone closer to the display of the washing machine, so that it can calculate the information. The application itself will decode error code and tell you how to solve it.

Before starting the diagnosis, it is recommended to carefully study the operating manual in order to have at least the slightest idea of ​​the internal structure of the machine for finding a breakdown / malfunction.

Possible problems

As mentioned earlier, such minor problems as an unclosed hatch or an excessive load in the drum will be displayed. But before starting any repairs, the washer should be de-energized and disconnected from the water supply. Consider common problems.

The machine does not turn on

This is the most common mistake that occurs during the operation of any unit (not only from this manufacturer). The reason may be not only wear or breakage of parts, but also some other cases. The most frequent of them may be as follows:

1. Lack of electrical energy.
2. Break the on / off button.
3. Breakage associated with interference filter.
4. Problems with electrical control module.
5. Not closed or locked drum.

The drum stopped spinning

In the case when the drum refuses to spin, it is necessary to comprehensively consider all existing causes. The problem may be in the breakdown of the power unit, and any other parts and parts.

The power unit is not working or stalled:

• Broken control unit.
• Breakage of the power unit.
• Problems associated with TENG.

The power unit makes sounds, but the drum does not move:

• A foreign object interferes with movement.
• Motor breakdown.
• The power unit brushes have become unusable.
• Drum bearings refused to work.
• Breakdown of the control unit.

The power unit rotates, but the drum - no:

• Pulley unscrew.
• A foreign object interferes with movement.
• Drive Belt Problems.

The drum does not spin in both directions. There is only one reason, it lies in the control units of washing units. It is he who directs the change of direction. In addition, some models are equipped with special control boards for the side of rotation, which also tend to break. Anyway, this problem can be solved only by an expert.

Drum spin faster or slower than necessary. Naturally, this issue should be considered solely in the context of washing clothes, and not the spin mode, when the drum can change the speed of rotation.

• The drive belt could loosen.
• The power unit brushes have fallen into disrepair.
• The winding of the power unit has fallen into disrepair.
• Malfunction of the tachometer.
• The problem with the control unit.

Washing machine does not spin clothes

• Spin function disabled.
• Unbalance or overload of the washer.
• The belt is worn out.
• Problems with the power unit.
• The water stopped flowing.
• Breakdown of the control unit.

Drain water does not occur or she leaves herself

Problems with the discharge of water may be the following reasons:

• Clogged filter.
• Pipe for draining water, siphon, hose or sewer clogged.
• The pump has fallen into disrepair.
• Failure of the electronic module.

In that case, if the water is drained independently, then often the problem lies in the wrong connection to the sewer pipe. In this case, you need to pay attention to the height of the connection drain hose. From the floor, it should be at least half a meter. In addition, there is a special valve called “Anti-Sin,” which can help deal with this problem.

Underfilling or excessive water overflow

• Problem with pressostat.
• Broken valve that supplies water.
• Cleaning the filter screen in the valve is required.
• Bad water pressure.
• The problem of the electronic module.

Vibration and noise of cars

Mobile diagnostics can also reveal another very frequent problem when the machine literally jumps all over the apartment. You can often come across strong buzz of the device during the spin process. The problem may be the following:

1. Improper installation of a typewriter.
2. Imbalance
3. Shipping parts were not loosened.
4. Bearings have become unusable.
5. The counterweight was weakened.
6. Shock absorbers or springs become unusable.
7. Stretched drive belt.
8. Fixing the case or parts must be tightened.

Luke can not open

Each modern washing machine has an automatic hatch lock function, which switches itself on before washing and turns off some time after the end. Even if the machine is de-energized after the end of the wash, be sure to wait a while.

The hatch can be locked if there is water in the drum.

Leaking cars

There is even no longer a diagnostic process, and personal observations may lead to the idea of ​​leakage. In this case, there can be only 2 variants of the development of events: a violation of tightness in one of the nodes or an excessive set of water, because of which it begins to pour out over the edges.

Often, tightness is broken most often due to the following reasons:

• Violation of the integrity of the tank.
• Problems with the connection of pipes.
• The snail drain pump has been damaged.

No water heating

If a the water stopped heating, then most likely, the matter is either the problem with the thermal sensor, or the breakdown of the heating element. In that case, if the water is heated, but for a very long time, then the problem must be looked for in scale on the heating elements.The heater is very easy to remove and clean yourself with the help of improvised means, such as citric acid or special household chemicals.

This is how the Smart Diagnosis function works. Now you can be aware of all the problems of your washing machine and know how to solve them.