What to do if there is no signal Tricolor

Today, the whole world gives priority to satellite broadcasting. In the Russian Federation, the largest provider of such digital television is considered the Russian operator Tricolor TV. Its products are of good quality, although sometimes there may be failures and errors. For example, often there is an error on the Tricolor of the form "no signal". What should be done in such cases, we analyze below.

The reasons for the lack of video

Common causes of "no signal" messages are:

1. Malfunction of satellite dishes, their displacement, loosening of bolted connections.
2. Bad weather, affecting the quality of video signals.
3. Wrong Connecting the tuner to the TV.
4. Failure of the Tricolor system settings (required their update through the main menu).
5. Damage to the connection (need to check the antenna and receiver cables)
6. No video signal on Tricolor TV from satellite.

It is not very difficult to tune an antenna already aimed at the satellite. Even a slight deviation in any direction can have a positive effect. With a very strong deviation is necessary to do complete reconfiguration satellite antenna or contact the installer for assistance.

What to do

The message “no signal” usually appears on the screen in case of a loss of a signal on a television receiver. To identify the cause of his disappearance, you need:

1. First, find out if any preventive work is currently being carried out. This can be done via the Internet by going to the supplier’s website or by calling the technical service.
2. If no work is being done, you can call the closest users of the Tricolor operator (relatives, friends, neighbors) to clarify if they have a similar problem.
3. If they are also puzzled by the disappearance of the video signal, then the reason is usually associated with the Tricolor, you must either wait until they decide it themselves, or inform them about the problems that have arisen and wait until they fix them.
4. If only your TV says "no signal", then the cause of the problem may lie in your equipment.

How to proceed

If the cause of a “no signal” type TV error in the Tricolor system is equipment malfunction, need to:

1. First of all, check all cables and wires for integrity, tight connection.
2. Replace if they break or break. It does not need to “twist”, connecting the broken ends of the wires, as this can significantly affect the quality of the display - viewing on all channels will be unstable.

To replace the cable or wires, you can use the connector and two F-connectors. This will require:

• Cut the cable at the break point.
• Clean it from the braid.
• Then screw the F-connector.
• Fit it tightly on the connector.
• Wrap tape.

If everything is fine with the wires and the cable itself, it is worth checking receiver capacity. To do this, it must be attached to any other antenna. For example, to the neighbor. If the TV is working and does not show the message "no signal", then the problem lies precisely in your antenna (it needs to be adjusted, strengthened or moved).Otherwise, the receiver is to blame, namely the tuner, which is responsible for receiving the video signal. You can solve the problem by contacting the Tricolor service center, where they will make a quality repair or, if necessary, replace the receiver.

Receiver (receiver) Tricolor

The signal may disappear due to the unstable operation of the converter. It is difficult to determine on your own. Only a master can clarify this problem. It is recommended to always have a spare converter for such cases, which you can easily replace yourself.

To determine the reason why there is no signal, you need to check:

• All connections, the integrity of used wires, cables.
• Receiver.
• Converter.
• Satellite dish, its position, settings.

All these actions can help solve the problem with the lack of a signal on their own. After that, you can still enjoy watching your favorite programs on all your TV channels.

But if you did not succeed, and the written message about the absence of the video signal reappears on the TV screen, you should contact the professionals or get advice from Tricolor by phone.

Natural causes of no signal

If there were no problems the night before with watching TV, and in the morning he suddenly starts writing on your screen that there is no signal, then the reasons may not be in your equipment. It may be:

1. Carrying out planned technical or preventive work related to Tricolor equipment (operators should notify their subscribers in advance, but you may have accidentally missed this information).
2. Carrying out similar work with owners of satellite equipment.
3. Preventive planned activities on the satellite itself.
4. Emergency work related to unforeseen situations on the equipment of the Tricolor company or the owners of the satellite kit.

About all such events can be found in the news on the Tricolor television website.

Tricolor TV prevention prevention ad example

There are cases when one or several TV channels do not work, and the rest continue to show everything perfectly. In this case, it is recommended to update the entire list of your television channels:

1. Press the MENU button.
2. Select SEARCH TV Tricolor channels (OK).
3. To the question: Attention! To update the list of your TV channels? - Answer OK (yes).

At the end of the channel search procedure, their number will be displayed on the TV screen. After that, you need to disconnect the TV from the network for a few minutes, then turn it on again and go to the channel that was not working. If everything is in order, you can be congratulated, otherwise the procedure should be repeated. To save all the channels found during the search, click OK. For the convenience of viewing all found channels can be streamlined.

It is impossible to disconnect the receiver from the power supply until the end of the whole process of searching and updating channels, otherwise a malfunction may occur and the equipment will be disabled.

Conclusion

You never need to panic and press all the buttons in a row, achieving a result. It is much easier to calmly find out the reason for the loss of the video signal, and you may not even need to take any action. If necessary, try to fix all the problems as stated above, or contact the service center, where you will be quickly, with updates of 2017, repair, replace or update the software. This also applies to other errors that occur during operation of the Tricolor TV, for example, errors 0 or errors 10.