What does the error "0" on Tricolor TV

Even a large operator such as Tricolor TV often encounters technical problems, which, however, are often not connected with problems as such, but with insufficient user awareness on how to fix them. One of these cases is the message Tricolor "Error 0".

Causes of the problem

Let's name the most common reasons:

1. The subscription to the Tricolor service package has ended.
2. Incorrectly installed access card in the receiver.
3. The receiver has been disconnected for a long time.
4. Poor satellite signal quality.
5. Power failure.
6. Incorrectly installed antenna (find out how to install correctly).

How to decide for yourself

What to do if you have such a problem? Let's start with the simplest - just wait a few minutes. Do not be surprised, this is really very often enough, and the image reappears.If it does not work, restart the receiver, and if you use the module for conditional access, you need to remove it, and then put it back in place. In parallel, we check just in case subscription expiration date on TV channels.

In order to reset the factory settings, you need to go to the "Menu" item "Settings" and dial 0000, and then delete the factory settings. It also means resetting the tuned channels, which can easily be restored after a restart.

A message about resetting to factory settings.

If the TV has not been used for a long time, it is necessary to leave the receiver working for several hours (7-8), and then check it again. For preventive purposes, the operator advises from time to time to leave the device for receiving and transmitting a satellite signal at night. This will help to avoid further problems of this kind.

The next step will be an attempt card re-activation through the operator Tricolor TV or independently. Unfortunately, most often errors give out receivers of the latest modelsbecause they are poorly adapted to the voltage drops that are common in our country.Fixing the problem through activation is a matter of 5-10 minutes.

If you decide not to write to the technical support service, but to cope on your own, remember that in the process of waiting for activation, the first channel of Tricolor TV should be turned on.

If it seems to you that there is no access to watching television because of an improperly hung antenna, you can try change its installation. It is not difficult. It is necessary to carefully change its position, watching the reaction of the TV. As soon as the channel "Info" starts to show, you can stop this process.

In fact, an error can sometimes occur for very obvious reasons. For example, a car with an alarm system tuned to your satellite stands next to your antenna; this is what prevents the signal from reaching the TV. Yes, it happens. See what to do if no signal tricolorand how can you generally amplify your television signal. However, most often the problem is solved by a combination of proven simple methods.

As you can see, the message Tricolor TV error 0 will not be a serious obstacle to watching your favorite movies and programs, it can be easily and quickly corrected. And independently, however, as error 9.