How to independently connect the receiver Tricolor to the TV

You made a long-awaited purchase and wondered how to easily connect the new receiver Tricolor to the TV? Now on the Internet, there are many specialized communities where detailed step-by-step instructions on how to connect these or other models are laid out, and the manufacturer himself is interested in making his device as accessible as possible in terms of connecting out of the box. Due to the constant debugging process on the part of the manufacturer and the increase in the knowledge base from the community, the digital set-top box is no longer a rare guest in apartments and houses of Russians.

Features of old and new models of receivers

All consoles Tricolor have the letter designations:

1. Cable connection - abbreviation C on the box.
2. Ground receiver - the letter T.
3. Satellite receiver - S.

Tricolor offers a wide range of satellite devices. Old and new range of models side by side in stores, and the choice is not always in favor of the latter. The fact is that the division into the “old” and “new” is only formal, some devices were produced for no more than two months, giving way to the next generations. There is a significant difference between the models. For example, a number of interfaces that can be found on the rear panel of the receiver:

1. HDMI cable.
2. Antenna high frequency output.
3. Tulip.
4. Scart wire

Receiver connection diagram

The antenna generation and scart are inherent in the old generation of consoles. Some modern models have only HDMI. Before purchasing equipment and connecting it to the provider's network, you should compare all the pros and cons, ask the consultant about the speed with which the device is switched on, as well as its technical characteristics.

It will not be superfluous to turn on the receiver in the store, carefully study the equipment (cables and adapters that may change) and listen to all the recommendations of the seller before agreeing to purchase.

All the provider's devices are pre-configured and do not require additional manipulations, however, difficulties may arise in terms of hardware, for example, the lack of necessary adapters. However, the old cable from the receiver does not have to look for a replacement, most often it fits the new device.

Connection Recommendations

Connecting a special receiver Tricolor to your TV will be easier if you know in advance some of the nuances.

For more fine-tuning, you must turn on the receiver and see what kind of firmware it has. If necessary, her should update.

Consider the algorithm of, how to connect the receiver through cable:

1. The socket output on the TV is connected to the device with a cable.
2. Both devices are turned on. The receiver displays the channel numbering.
3. On the remote control from the TV, press "0" and use the search. Autoscan will stop at the frequencies of your Tricolor.
4. If the device is connected correctly, “no signal” is displayed on the TV screen.

Another method is used to connect to LCD panels:

1. To connect the necessary wire SCART or, in other words, "bells".
2. The cable is inserted into the socket on the receiver, the other end of the wire, respectively, to the TV, then it should be turned on.
3. The device will show the serial number of the channel.
4. On the remote control, you must press A / V, this will help to switch to video mode. Then we have to find the connection we need in the menu. When properly connected, you will see the inscription "no signal".
5. If it does not appear (or another inscription), then something is done incorrectly. Next, hold the buttons 0, 1 on the remote control.
6. The picture will be displayed as soon as the signal is received (find out what to do if Tricolor signal is absent). From below you can watch all the information about the received TV channel. To display the signal level, on the remote control, you need to press the “i” button a couple of times. These scales will help in the further search for a signal from the satellite.

Connecting the receiver via SCART and HDMI

If the text version of the Tricolor receiver connection scheme is not completely clear and visibility is required, we recommend viewing the thematic videos.

Summing up, it should be noted that connecting the receiver to the TV is not difficult, as there is always a detailed step-by-step instruction included, and, as noted earlier, today this process is as simple and automated as possible. By the way, you can install the Tricolor system not only for one, but also on two televisionsand if you wish, you can connect tablet.