Step-by-step instructions for updating the Tricolor software for 2017

Everyone has already become accustomed to watch programs and movies on satellite television. Who loves non-fiction, cartoons or detectives. Tariff selection large and quite diverse. But sometimes something strange happens. That channels hang, then signals disappear. Most often, in such cases, there is nothing left but to update the Tricolor TV software. In order to avoid such troubles, it is better to carry out a number of preventive measures in advance, that is, to carry out an update of the set-top box software. Below we provide step by step instructions on how to do this.

How to perform the update

Tricolor TV company periodically takes measures to upgrade its software,so that it works quickly and efficiently. Accordingly, after the operator updates, you also need to restart the home receivers. To do this, you can call the wizard, who quickly and correctly make the firmware and debug the receiver Tricolor. Correction of its software kernel can be done and by myselfby following the instructions for updating the software.

How to reflash the Tricolor receiver module itself, you can learn from the following instructions:

1. Turn off the power of the TV box, then turn it back on.
2. Switch your receiver to the information and technical channel operator Tricolor.
3. When the message “Update software?” Appears on the TV monitor, select the answer “Yes”, thereby starting the automatic software update procedure.
4. After that, messages about the update process will be displayed on the screen of the receiver for several minutes.
5. When the update is complete, the equipment will turn itself off, and then turn on again.
6. Now, according to the summary on the information channel, you need to verify the required version with the receiver version of your receiver.

If the reconciliation data coincide, and the TV is working successfully, then everything is in order.The update went well and you are guaranteed a few months of quiet viewing of your favorite channels. At least until the next software update on Tricolor TV.

But sometimes after the manipulations, the receiver may not respond to the signal from the control panel. In such cases, the receiver must be turned off manually using the “STANDBY” button on the device itself, and then turned on again. The remote will again be able to recognize signals from the receiver and will begin to function correctly.

Receiver indicator status table

Re-flashing of modules of the GS series

Software Tricolor TV Series GS in 2016 was subject to many changes in order to improve the functionality of the equipment. New Receivers 2017 already supplied with the latest updates installed. And in order to update your gs receiver to the latest version, you need to follow the tuner firmware instructions described above.

After adjusting the software, all settings of the receiver being flashed will be reset to the factory settings. The subsequent switching on of the receiver will be done using the installation wizard.

First we select the language for the main menu, then we define the operator and start searching for channels.In the case of a message with a proposal to update the conditional access module, we answer in the affirmative. It will not take a lot of time, the main thing is not to disconnect the tuner from the power supply at this moment.

In what cases do the receiver firmware via USB

In more difficult situations, when, for example, you have not used your Tricolor receiver for a long time, it will need firmware in manual mode. It is best to refer the receiver to the service point in this case. If you are an advanced user, this procedure can be performed by yourself.

Modem cable for firmware tuners

Self firmware receiver via USB:

1. Turn on your tuner and in the menu specify the version of the installed software of the device itself and the main access module. For the device to work correctly, you need to make updates at the same time. All numbers must be written exactly as they are listed in the console.
2. Then go to the website of the operator Tricolor to check for new changes in the software version. If there are updates, then they need to be downloaded to your computer.
3. Take a USB flash drive, format it and write the downloaded data to its root.
4. Insert the USB flash drive into the USB socket on your tuner.
5. In the menu, select the "Settings" item, then the "Update" item. Click OK and in the window of the receiver screen select the file with the firmware of your module.

When the software update process is over, the prefix will reboot itself. After which you will need module adjustment conditional access, for this you need to select the appropriate file. If all the above actions are performed correctly, the software versions of the receiver and the conditional access module will be changed to new ones (you can check your own records). So it is not at all difficult to update the gs Tricolor receivers in 2017, you just need to follow the step-by-step instructions.

Recommendations:

1. Keep up to date with the latest software updates for your hardware.
2. To properly perform the firmware of your receiver, you need to follow the specified instructions and all the prompts on the receiver screen.
3. You can not turn off the power supply of the equipment until the completion of the entire update process, no matter how long it takes.

Tricolor Company is doing everything to television programs played on your equipment in excellent quality. It is only necessary to monitor software updates for your receiver in a timely manner and to conduct them in time.If it is not clear how to flash the receiver yourself, you can always contact the service centers, where the masters will do everything for you. Experts will advise if any problems arise, whether error 5 or difficulties with module registration.