How to clean the iron from plaque with toothpaste

In any house there is an iron - one cannot do without this electric assistant in the modern world. Due to long use, its working surface - the sole - is polluted, which can cause damage to your favorite clothes or white bedding. How to prevent it? There is a simple way - to clean the iron with toothpaste.

Sequencing

After prolonged use, the work surface is gradually polluted. A question arises before us: how to restore the former smoothness and specularity of the sole? There are many ways to do this, but we will look at a rather unusual method of cleaning an iron at home with an ordinarytoothpaste.

We all know that this tool perfectly removes various deposits from tooth enamel. So why not use it to clean the carbon on the working surface of the iron?

Choose the cheapest paste: it has a much higher content of various chemicals. It works like baking soda on the burned places of kitchenware.

The whole process has several stages:

1. We heat the iron to the minimum temperature - the surface should be a little warm, but not hot.
2. Disconnecting the device from the network, carefully apply the paste with an old toothbrush to the place of the burner and vigorously three.
3. Then apply the product to the entire surface for prophylaxis.
4. After half an hour, with the help of a clean napkin and warm water, we remove the remains of the paste from the surface.

The sole of the iron again shines with pristine purity, it can be used without fear of spoiling things.

Hostess note

In the process of operation of the iron must adhere to elementary rules:

• Use only filtered or boiled water for pouring into electrical appliance.
• Do not use often the maximum mode steam and ironing.
• If partial contamination is detected, clean immediately.With further use, carbon deposits are fixed, and it will be more difficult to remove.
• When cleaning do not use hard fabrics and sponges.
• After completion of work, pour the remaining water from the iron.
• It is better to put the iron vertically, then the surface will not touch foreign tissues. It is 100% protected from unwanted burning.
• After each use, wipe the work surface with a damp cloth.

Do not try to clean the holes for steam from carbon deposits using metal objects - use cotton swabs for this.

Using toothpaste to clean the iron will save you a family budget, eliminating the search and purchase of expensive cleaning products. To minimize the pollution of the sole, it is necessary to strictly follow the tips described above and try do not overheat electrical assistant. Then he will serve you faithfully for a very long time.

Types of surfaces of the sole of irons and their features

Aluminum and stainless steel

The working surface in domestic irons, as a rule, is made of anodized aluminum or polished stainless steel, these alloys have a very decent thermal conductivity, which increases the effectiveness of effects on various fabrics during their ironing. But, according to experts, the risk of undesirable deposits in them remains quite high.

Enameled surfaces

Irons with such a coating perfectly slide over the surface of any fabric, the smallest pile does not stick to the mirror surface. Enamel much longer protects the working part of the iron from carbon, but does not completely exclude its appearance, although cleaning this surface is much easier.

Titanium Coatings

It is considered more wear resistant titanium sole - it is not afraid of mechanical impact, but its thermal conductivity is much lower, therefore, the power consumption during ironing increases, which is a negative indication.

Sapphire base

Of course, the gem is not used to cover the working part of irons - this is the name received mineral abrasive crumbwhich is more resistant to scratches and other mechanical damage.

When contaminated such a surface can be cleaned with a special metal brush, which is sold in any store under the sign "Everything for the House."

Ceramics and Teflon

Today, the leading companies for the production of irons are using ceramic or Teflon coating for the foundation, with which the hostess has to be treated very carefully. It should be cleaned quite delicately, without the use of metal objects, use only soft tissue.