Secrets of cleaning iron with a steam generator Kärcher

Cleaning is the key to long-term operation and proper operation of any device, and the iron is no exception. The lack of proper care entails a decrease in the power of the device, a deterioration in the quality of processing and damage to things. Cleaning the iron with a steam generator Kärcher does not take much time and will avoid these problems.

When do you need to clean the iron?

The device with a steam generator is designed for ironing a large number of things. The constant flow of steam helps in processing, but leads to clogging of the holes on the sole of the iron. These residues appear due to the water used and resemble salt deposits. In addition to the raid, on the sole of the device remains dirt and soot. If the pollution is not eliminated in time, then hardly removable traces will be transferred to the clothes. Therefore, it is important to know how to clean.

Ways to clean the sole

Most of the dirt appears on the sole of the device. However, it is easy to eliminate them. For cleaning you can use:

• Cleaning pencil. Means is suitable for teflon, ceramic, corrosion-proof surfaces. Cleaning is carried out after heating the sole. The pencil is applied to a hot surface, which is then wiped. In this way you can get rid of soot, plaque, scale, dirt.
• Detergent or washing powder (enzyme) is diluted in warm water until a homogeneous mass. The sole is wiped with a soft cloth moistened with a mixture. After removing the dirt, wipe the iron with a damp sponge.
• Vinegar. This method eliminates molten tissue and corrosion. Rag dipped in heated vinegar, wipe the surface of the device. Then the iron is wiped with a damp sponge and dried.
• A mixture of vinegar and salt. This method is used for complex contaminants. For the preparation you will need half a glass of vinegar and a tablespoon of salt. The mixture should be heated on the fire until all the crystals are dissolved. In a warm liquid sponge wetted. It is necessary to wipe the surface for several minutes, after which the device is treated with ordinary water.

Most methods are suitable for cleaning not only the soles, but also the external surfaces of the iron with a steam generator. If stubborn impurities are encountered, methods can be combined.

Additional methods

You can clean the iron and other ways. These methods are suitable for minor contaminants, and perfectly complement the basic cleaning.

Ways:

• Salt is poured on the sole and pounded. Then the iron is wiped off. dry sponge. This technique eliminates rust, starch stains.
• The iron is heated to the maximum temperature and rubs on the salt poured on a sheet of paper.
• A rag is impregnated with a composition made from ammonia with vinegar. The sole of the iron rubs against matter. It is recommended to heat the device before the procedure.
• Hydroperite is also suitable for cleaning. On the heated surface of the iron should hold a tablet, the dirt will begin to flake off. Before starting the procedure, open the windows for airing.
• Peroxide has proven to be excellent. The cotton wool moistened in this liquid quickly eliminates dirt.

Effective recipes will help to avoid tissue damage and prolong the service life of the device.

Recommendations

Steam iron cleaning can be in different ways and they are all reliable.Each method has some nuances. Following these simple guidelines will keep your device in good condition:

1. Using vinegar or hydroponic need to open the window. Heated substances emit a peculiar smell.
2. Cleaning the heated appliance should be done with extreme care.
3. After using the pencil, it is important to thoroughly wipe the surfaces, since the holes for steam can be blocked.
4. The iron should be wiped with water after each cleaning.
5. Wipe the device with each use.

When choosing a cleaning method, it should be remembered that during the procedure only soft materials should be used. Knives, iron sponges, sandpaper, simply ruin the surface of the device.

Useful tips

In any lesson there is a small trick, cleaning the iron is no exception.

Interesting tips:

• You can remove the polyethylene stuck to the sole of the device with the help of a nail polish remover.
• Eliminate rust and plaque can sulfuric strip matchbox.
• If the device is cleaned with sandpaper or a knife, it is possible to return the smoothness of the surface. To do this, finely grated paraffin mixed with salt and cover with a napkin. This mixture is ironed with an iron heated to 100 °.