How to clean Philips iron from scale using various means

Everyone was faced with the fact that when using a Philips Phillips with the function of steaming, sooner or later a scum forms in it. It settles both inside the device and outside on the sole. Steam outlets are blocked and this function can completely stop working. Do not rush to carry the device to the workshop or throw it away! If there is a need to clean the iron from the scale in the home, use our tips.

When you need to clean the iron

All modern manufacturers recommend using only when using equipment purified water. But in practice it is not always possible to strictly follow the recommendations. Yes, and in the purified water there are impurities of salts, which when heated settle on the walls of the device.This leads to a problem.

Signs that indicate that it is time to cleanse:

1. The sole of the iron has become worse to slide on the material.
2. Steam does not come out of the holes in sufficient quantities and under the necessary pressure.
3. On the fabric after the application of steam mode, there is a residue in the form of white solid crumbs, flakes or fine sand.
4. In particularly advanced cases, the device may become heavier and contain less water than is necessary to fill the tank, due to the large amount of salts formed.

Self-cleaning function

Some manufacturers have already found a solution to this problem during production. For example, to clean a steam iron tefal from scale, it is easiest to use the function self-cleaning, which in most new models provided by the manufacturer. The presence of such a regime will greatly facilitate the task.

How it works:

1. Fill the tank with mineral water or special compounds.
2. We warm up the iron to the maximum.
3. Turn off and let stand.
4. Repeat the heat to the maximum.
5. We translate the device operation mode into “self-cleaning”.
6. At the time of release of steam with the remnants of scale and dirt, actively shake the iron for better cleaning.
7. Drain the rest of the liquid with dirt and sediment from the tank.
8. Wipe the sole with a damp cloth material.

Unfortunately, not all models have a similar function. For such devices, you can apply the traditional cleaning methods described below.

What means can you use to clean the iron

It is possible not only to clean the iron from scale special liquid formulations, but also improvised homemade materials. With ready-made products, everything is clear: in any store of household chemicals or household appliances, you can purchase a compound that will clean your iron regardless of the complexity of contamination. Typically, these drugs are more expensive in price than the materials at hand. But their advantage is that the composition is specially balanced, does not require preparation and will not cause harm to technology.

If you want to use home remedies, it may come in handy:

• citric acid powder;
• vinegar table;
• perhydrol tablets;
• ammonia.

Homemade cleaning products

If you decide to use dry ingredients to clean Tefal iron, they must be dissolved in purified water. A 25 gram packet of citric acid needs to be dissolved in 200 ml. water.Perhydrol tablet dissolved in 300 ml. Table vinegar or alcohol is also not recommended to use in a concentrated form. Dilute the ingredients in a 1: 1 ratio and only then send the resulting liquid to a water tank.

Concentrated liquids can harm the material from which the water tank is made: as a rule, in irons, asphalt, It is made of polymeric materials.

How to clean the iron from scale? Heat the iron to the maximum and let it stand for 15 to 30 minutes. Liquid will dissolve accumulated sediment. After that, turn off the appliance from the outlet and turn on the steam release mode. This will clean the salts from the holes in the sole.

Clean iron sole Tefal from scale can be similar home remedies, but more concentrated. Dry matter diluted 2 times less water. The process is extremely simple:

1. Wet the soft material with the resulting liquid, vinegar or ammonia.
2. Leave on it the sole of a warm iron for 10-15 minutes.
3. After that, wipe the surface with a cloth moistened with clean water.

If the desired purification result is not achieved the first time, repeat again.A similar method can be used to clean the Filips iron from scale or a device from another manufacturer.

Always clean in a ventilated area, or even better in the open air. Evaporation of substances released at high temperatures may adversely affect your health.

Before cleaning the device, carefully study instruction. The manufacturer, as a rule, always gives clear recommendations on the use and care of their goods. Follow the guidelines and take care of any household appliances. For this, you will get her good performance over a long service life.