11 simple ways to remove scale from the boiler

Each housewife in the kitchen has a large number of electrical appliances. Over time, they form a raid. Is no exception and the boiler. With the advent of this ill-fated raid, the appliance loses its former appearance, and most importantly, it can break. And then the question arises: "How to clean the electric boiler from unpleasant scale?"

What is scum?

The appearance of brown or yellow bloom on the boiler indicates the use of polluted water.

In the water we use are:

• organic and inorganic impurities;
• sulfates;
• chlorides;
• silicates;
• magnesium salts;
• calcium salts.

When the water is heated to 40 degrees, a chemical process starts, as a result of which chemical compounds are formed, settling on the device in the form of scale.

What is harmful plaque

Crystalline growths cause great harm not only to humans, but also to technology.

The more impurities in the water that we boil, the faster the scale builds up. The rate of its formation also depends on the quality of the surface of the boiler and the temperature to which we heat the liquid.

Improper cleaning of the heater leads to more rapid formation of deposits. Scum need systematically delete, in process of its formation, but in no case it is impossible to apply metal scrapers.

If you do not clean out the crystalline growths, then the time and energy spent while boiling water will increase each time. A large layer of plaque can break the appliance.

Scum that has entered the body along with tea can lead to the deposition of stones in the kidneys and bladder..

We clean the boiler from scale

There are many ways in which limescale can be cleaned.

Consider the simplest of them.

Cleansing with citric acid. This substance is in the kitchen of any hostess. With citric acid, you can remove the average limescale.To do this, 30 grams of the substance must be added to the water, put the last boiler and boil until the scale has completely disappeared.

Application fresh lemons. The principle of operation is similar to the purification using citric acid. To clean the appliance, you need to take a couple of lemons, chop them up, add water and boil.

Vinegar. This method of cleaning the boiler will not do any harm to the device or person. In 1 liter of water we pour 100 milliliters of 9% vinegar. Put the appliance into the solution and boil it before cleaning it of lime scale.

Acetic Essence. At 1 liter of water will be enough 1 tablespoon of vinegar essence. Boil the device in the solution, then leave in acidic water for 1 hour. After that, drain the water and thoroughly wash the appliance.

Soda. For 1 liter of water will need 1 tablespoon of soda. Boil the solution for 30 minutes. After the procedure, to remove residual soda, thoroughly wash the appliance.

Potato peelings. To get rid of a thin layer of crystalline growths, you can use the "grandmother's" method. Potato peel, pre-washed from the ground, pour water and bring to a boil, then leave for 2 hours.Clean the appliance of scale and residue.

Tomato or cucumber pickle. Organic acids, which are contained in the brine, will help to clean the device from limescale, just boil it. But immediately there is the following problem - getting rid of the specific smell of brine. After all, I do not want to drink tea or coffee with a taste of cucumbers. To do this, hold it for a few minutes in a weak acetic solution.

Apple rind. To get rid of plaque will be useful peel sour apples. Boil the water with a kettle, adding the peel of two apples to it, leave to cool completely. Remove soft sponge with a soft sponge.

Carbonated drinks.Drinks with gas contain orthophosphoric acid. To remove limescale, you can take a Coca-Cola, which will perfectly cope with the task. You must first remove all the gas from the drink, it is necessary so that during boiling the liquid does not foam and does not “run away”.

Milk. Quickly get rid of solid deposits boiling milk will help for 1 minute, then the device must be dipped in cold water. After this procedure, the raid will disappear.

Soda, Citric Acid, Vinegar. This mixture will help to clean old lime deposits. First you should wash the appliance well. Purification occurs in several stages. To start 125 grams of soda dissolved in water. The solution must be boiled with an electric appliance for 20 minutes. At this stage, the soda is absorbed into thick layers of sediment.

The next step is boiling water with citric acid. To prepare the solution will need 3 liters of water and 40 grams of citric acid. When boiling the liquid, the acid penetrates the pores of the plaque and reacts with the soda already there. As a result, bubbles of gas formed will loosen thick layers of plaque.

And finally the final stage of cleaning. The third part of the tank must be filled with vinegar, the rest of the water. This mixture must be boiled for half an hour. After such a long procedure, you will rid the appliance of the thickest and oldest layer of scale.

In order to clean the boiler from plaque, you can resort to the use of chemicals that can be purchased at any hardware store. But is it necessary? After all, chemistry is harmful to health!

No matter how you get rid of the ill-fated raid, the main thing is to wash the device well afterwards and boil clean water a couple of times. To prevent scaling, it is enough to boil water with citric acid in it once a month.

To clean the boiler from the plaque, as it turned out, is quite simple. But is it worth running the appliance before the formation of a dirty-yellow crystalline growths? Or is it better to warn them?