How to effectively clean the hood in the kitchen from fat

Kitchen hood - an important element of technology, creating a comfortable environment for cooking and eating. Late cleaning of the filter and grill reduces the performance of the unit, allowing the formation of soot in the kitchen. Exhaust umbrella that eliminates odors and prevents the formation of soot, you must also periodically clean. Increased noise in working condition and reduced performance are the first factors that pollute cleaning equipment. How to clean the hood inside, even if outside it can not be washed with a sponge with detergent? The presence of a suction effect attracts evaporation particles to the surface of the aggregate, thus forming a sticky grease deposit on the device.

Cleaning preparations

Cleaning the kitchen hood is a rather laborious process. Before washing, it must be completely disassembled. But the most difficult in the process is the direct cleaning of the mesh and filter from soot and dirt. Depending on which of the material the body and parts are made; a special cleaning agent is selected. What kind of tool you need to apply, usually indicated in the instructions for the device. Incorrectly used detergent can damage the unit. Therefore, it is very important to know how to clean the hood in the kitchen properly.

Before proceeding with the purification, you need to take a few steps:

• study in detail the instructions and recommendations of the manufacturer regarding the purification of specific details;
• examine the list of collapsible construction sites;
• disconnect equipment from the mains;
• disassembly and disassembly is carried out according to the process description in the technical documentation - this will allow not to lose the parts and correctly fold them back.

If you want to know how to wash the hood in the kitchen, follow these standard steps:

1. Remove the upper surface of the housing.
2. Pull out meshclosing the internal cleaning system.
3. All parts and retainer it is necessary to remove and soak in a separate container with soapy water, since they will also contain fatty deposits.
4. Take off filter.
5. Unscrew the pipe leading the polluted air to the ventilation hatch.

After it was possible to dismantle the device and remove all the dirty parts, it is possible to either clean the extractor from the grease or to process all the elements, including the outer casing.

Ways to clean the kitchen hood

The most affordable and effective means of cleaning from the fat of any hood in the kitchen are home remedies. What can wash the hood, if it is not used very intensively, and the process of cooking occurs from time to time? The cleaning interval can be 6 months, using the usual dishwashing detergent and a sponge. Soap solution will wash all parts and the air filter. But before cleaning it is worth making sure that it is washable and not replaceable.

To separate the pollution occurred easier and faster, you need to make a quarterly cleaning.

With the formation of sticky plaque with a thick layer of greasy dirt on the grid,there will be a need for more powerful tools. Options for cleaning the kitchen hood may be as follows.

Cleaning with soda

Treatment with soda solution

This is the fastest, safest and cheapest way to clean the mesh. The procedure includes the following steps:

1. Selection of containers in which you can boil the grate in solution, depending on its size. If it is large and does not fit in one pot, you can take any dishes into which it will fit in width, and clean it from two sides in turn.
2. Preparation of soda solution: 0.5 tbsp. soda diluted in 3 liters of water.
3. The purification process takes 20-30 minutes, depending on the degree of contamination.

In boiling soda solution, particles of any origin are separated, and the structure is not scratched.

Ammonia treatment

If the contamination is old, and when boiling in the soda solution, there are residual contaminants, you can wash the extraction grid with ammonia. For these purposes, you need 0.5 Art. alcohol diluted in 3.5 liters of hot water. Considering that ammonia has Strong smell, it is better to carry out the procedure in a mask in order not to burn the mucous membrane, and also to open the window. The soaking process will take 1-1.5 hours, after which the grid can be washed under running water and dried with a towel or napkin.

Ammonia for cleaning

Soap solution

The use of soap solution requires a rough cleaning of the hood from the fat, as for these purposes the sponge will not help much. You will need plastic or metal here. scraper. To prepare the solution, it is necessary to dissolve the usual 72% household soap in hot water, with a concentration of 0.5 bar of soap per 3 liters of water. Small parts can even be boiled, and the grid rub with a solution and proceed to mechanical processing.

Acetic acid

If you do not know how to clean the greasy grate from the hood, try this method: treatment with acetic acid is also an effective tool for removing sticky dirt. The smell is pungent, therefore it is necessary to provide fresh air. All elements are rubbed with a sponge dipped in vinegar. For the separation of pollution enough 7-10 minutes. After treatment with an acidic solution, the parts should be washed in running water.

Lemon acid

With light dirt, you can use lemon, which, as in the case of acetic acid, is able break down fat particles. A very effective treatment with a lemon hood, which also attracts dirt, and soot is formed on it. Instead of lemon juice, you can use dissolved citric acid at the rate of 2-3 tbsp. on 1 l of water.

Chemicals

This method is used for old fatty formations, when the hood was not cleaned for a long time. For these purposes is used pipe cleaner, you can try the means for washing the oven. If the consistency of the liquid, it is worth soaking the grill and other parts for 10 minutes, and rinse with hot water. The powder should be pre-diluted in water and then processed.

The cleaning process will take no longer than any other processing of kitchen appliances. Regular cleaning of the filter, even in the usual soap solution, will not allow the accumulation of soot on the grate and other internal details. If available, it is possible to wash the hood elements in the dishwasher. Regular maintenance of exhaust technology will shorten the cleaning time of all parts of the design and extend the performance of the unit.

Cleanliness in the kitchen is very important for any housewife.We can say that the methods described in the article are suitable not only for cleaning extracts. Vinegar, citric acid and soda are used to clean a wide variety of surfaces. To make the kitchen shine, read the rules of purification. gas stove and her electric fellow, multicookers, microwaves. Many people are unaware, but the dishwasher needs regular cleaning, and ours will tell you how to do it correctly. article.