How to independently replace the bearings in vacuum cleaners Lg and Samsung

No family can do without a vacuum cleaner right now. Most users try to acquire the highest quality models from well-known brands such as Lg, Samsung, etc. Their models have a beautiful design and excellent quality. But nothing lasts forever. And even the highest quality devices can break down and stop working. In such cases, it is best to contact the appropriate service centers. But if the damage is not too serious, you can handle the repair yourself. For example, the replacement of bearings in a Samsung vacuum cleaner can be done by hand. Consider how to do this.

The principle of operation of vacuum cleaners

All Lg and Samsung vacuum cleaners work one at a time. general principle. Models are equipped with inertial air pumps, which are driven by a brush electric motor. This engine (motor), together with the absorption of air, injects dust and small debris. The latter is deposited on the filters of the device, and after passing through them, it accumulates in special dust collectors, which must be regularly cleaned (for more information on the internal structure -device vacuum cleaner: the main components classification).

Also, almost all Samsung vacuum cleaners are equipped with features and elements such as:

• Air flow regulator.
• Dust bag filling indicator.
• Engine power regulator.
• Automatic shutdown of the Samsung vacuum cleaner with a full dust collector.
• Winding the electric cord in automatic mode.
• Pressing trash.
• Compartment to hide the network cable, which can be from 3 to 5 meters long.

Causes of breakdowns and their elimination

Lg and Samsung vacuum cleaners can have various reasons for failure, for example:

1. Cord problem occurs quite often. Behind the fan is usually located the electrical part of the device. It is important to check the integrity of the cord, as it is often damaged by its outer shell, the current-carrying core.
2. Problem with garbage collection. That is, the Samsung vacuum cleaner, for example, works, the suction is normal, and the garbage is collected poorly. One reason for this problem is the seizure of the roller bearings. To make sure of this, you need to unfasten the brush roller and unscrew the end caps. At these ends there should be no debris, threads, hair. If they are present, they should be removed.
3. The cause of the Samsung vacuum cleaner engine failure may be the bearing itself. If you take the motor of the device in your hand and slightly shake it by the anchor, then you will notice that if the bearings are faulty, the shaft will also stagger to the sides. In this case, the mandatory replacement of bearings.
4. Bearings may also be to blame for the smell of burnt rubber. In this case, you must check the free rotation of the roller-brush. If the rotation is tight, then in most cases it is necessary to replace them. You can pre-lubricate them, and if this does not solve the problem, bearing replacement is inevitable.

If Samsung vacuum cleaner, LG and others are starting to buzz and “roar”, which means that its bearings are out of order. To start their self-replacement should be only if you have experience in repair work.

How to start repair

Although the products of Korean companies Lg and Samsung are of excellent quality, easy operation and simple maintenance, no one is insured against the occurrence of breakdowns and malfunctions in the vacuum cleaner.

Any DIY repair of vacuum cleanersincluding Samsung models, start by turning off the device from the outlet and removing the case.

Then required:

1. Remove the filters that close the approach to the engine.
2. Unscrew and remove the bed from the engine block.
3. Remove the motor from the housing.
4. Remove the fan.

How to replace bearings yourself

To replace the bearings in vacuum cleaners Lg and Samsung, you need:

1. Remove the brushes and unscrew the screws with which the instrument case is tightened.
2. Remove the engine cover using a small hammer and a screwdriver. Everything must be done carefully and carefully so as not to damage the winding.
3. Carefully remove the bearings from the armature shaft.
4. With the help of a small hammer and a small tube with the required diameter, install new bearings on the vacated space.
5. Assemble the motor of the Samsung vacuum cleaner or Lg by performing the actions in the reverse order.

Engine diagnostics

A vacuum cleaner may fail due to:

1. Overheating of the collector due to sparking or physical wear of the bearings.
2. Inadequate ventilation, causing the engine to overheat.
3. Water ingress into the engine and the resulting closure or corrosion on its elements.

In the case of the integrity of the fan impeller, engine repair available. If the impeller is damaged (which often occurs due to the ingress of foreign objects), the engine must be replaced with a new one.

Of course, not all types of faults can be repaired with your own hands. In case of doubt, you should contact the specialists of the service departments of Lg and Samsung.They will give you professional recommendations and, if necessary, will replace the bearings and the engine, providing original spare parts.