Own juicer project: folk methods of extraction of natural juices

Juicers are needed for every summer resident and gardener. These devices are especially useful when it comes to squeezing the fruit at the end of the summer season. The design of such a device is quite simple, so it is not necessary to purchase it from a store. A do-it-yourself juicer will help recycle large amounts of fruits and berries quickly and easily.

For the manufacture of such a device, we will need materials and tools, as well as a couple of hours of our precious time. We learn in more detail how to make a juicer with your own hands. Consider the main types of homemade units.

Juicing machine

An unused centrifuge washing machine can be used to make centrifugal model. The juicer from the washing machine will cope with such tasks as grinding the raw materials, squeezing and filtering the liquid.

To facilitate the task itself, the first thing to do is to draw detailed drawings. The drawing will allow you to make a preliminary plan for the future instrument and prepare the necessary tools.

The design of a homemade juicer from a washing machine: 1 - washing machine tank; 2 - centrifuge; 3 - mesh liner; 4 - bunker for fruit; 5 - grater; 6 - sleeve axle; 7 - guide pipe; 8 - the engine; 9 - car tire.

To carry out the planned project, it is necessary to prepare a centrifuge, a non-deformed casing, holders for fastenings, bearings of various sizes.

The work is carried out in accordance with the algorithm:

1. First of all, it is important to clean all parts of rust and scale caused by constant exposure to powder. Using emery paper, polish all cleaned surfaces to shine.
2. The resulting design provides for the presence of only two holes. The first is for loading ingredients, the second is for ready juice. All the rest should be closed with rubber inserts.
3. The next step is to prepare the grater and gasket. Gasket is preferable to cut with stainless steel grinders. This will increase the reliability and service life of the unit. You can make a grater by following a few basic steps. Drill holes of small diameter and divide the resulting circles into sectors. Fix the prepared element with screws, tamp the cutting teeth.
4. The drum must be retrofitted with ribs, filtering mesh.
5. A polyethylene pipe can be used as a loading container. Secure it with metal corners. It should be bolted with a slight shift to the side so that its edge is aligned with the exit of the grater.
6. The product pusher is easy to prepare from any wooden handle.
7. To ensure that the device does not fall below the level of the grater, put a limiter.
8. The more powerful the engine you use, the better the performance of the device.

All items must be OK securedas well as insulated electrical parts.

Before starting the first run, clean all parts with detergent.Be sure to perform a preliminary start. This will reveal the extra noise and tapping, which indicate an error in the design.

Load the fruit into the tube, substitute the container, press the pusher on them. Squeeze the juice should be made until you feel the vibration. After the appearance of vibration, stop filling with new products, allow the device to work on the spin cycle. Upon completion of the procedure, immediately disassemble the device into parts and wash them thoroughly.

In addition to our recommendations, you can ask for help to the video clips, which describe visually and in detail all the stages of design.

Other types of units

Others can be made independently. juicer varieties.

Pressing juicers are good friends of winemakers. Screw press is best suited for pressing grapes. Depending on the grape variety, different principles of processing berries are applied. White grapes are squeezed out only after crushing. Spin red is made only after the start of the fermentation process.

The press operates according to the following algorithm.First, the grapes are placed in the basket, then the screw mechanism presses the juice from it, which can be used to make wine, various drinks, jelly. The press for grapes with your own hands can be prepared from wood, plastic or stainless steel. The easiest way to perform it is from wood. Stainless steel device will be better and more durable.

Making press juicer shown in the video.

Of meat grinder can perform screw type juicer with an average capacity. Rotate the handle and get the juice. Such a mechanism is best suited for handling small volumes. The main advantages are the affordability, reliability of the design and the possibility of long-term operation.

Conclusion

Gardeners and gardeners homemade juicer very useful. After all, having completed the device with your own hands, you will be able to save a lot, make the device more compact and realize your engineering abilities. We considered several of the most common types of pressure for self-production. However, it’s not necessary to follow the instructions exactly, you can prepare your drawing,and make a device by own ideas.

Ways can be very diverse. The device, made by hand, will delight you with its effective work, as well as allow you to keep vitamins useful for the body in the juice.