4 causes of problems in the oven electric cooker
Despite their reliability, electric ovens are a complex technical tool that, even when proper care and cleansing able to come into disrepair. Depending on what signs characterize the failure of the plate, we can distinguish the following situations:
- the oven does not heat up;
- lack of lighting;
- automatic shutdown;
- Failures in the control panel.
The oven does not heat up
The situation when the oven in the electric stove does not work can very often be the result of problems with the operation of the temperature sensor. The main reasons for this failure include:
- damage to the power cord;
- failures in the switches;
- fan failure;
- bad fit of the door.
Lack of power may cause insufficient heating of the oven or its absence as such. Unplug the cooker from the electrical outlet and check the integrity of the cord that powers the device. One or more small defects on the surface of the wire can undermine the entire system.
Due to the occurrence of a short circuit, switch control could fail, thereby paralyzing the work of the oven. In order to make sure that the reason lies precisely in the breakage of the switch, it is necessary to carry out the following actions:
- turn off the power to the stove;
- scroll the power adjustment knob first to the maximum and then to the minimum value;
- upon reaching the upper and lower limits, the switch should make a distinctive sound.
To replace a broken switch with a new one, unscrew the back panel of the electric stove and replace the mechanisms.
It is important: to remember the location of the wires and the power switching knobs on your electric stove and not to confuse them in the future - sketch or photograph them schematically.
Fan failure - far from uncommon.But do not rush to immediately buy a new one and replace it. It is possible that to resume the functioning of the mechanism, it is enough to lubricate its internal parts, which eventually got used to each other.
Lack of lighting
The light bulb has a rather long lifespan. If it is burned out, you need to replace it with a new one. Information about the power and size of the cap is listed in the manual of the oven. To replace the need to carry out the following steps:
- disconnect power from the equipment;
- remove the special protective cap;
- Replace the lamp according to the instructions in the instruction manual.
When buying a new backlight, it is necessary to consider such an important parameter as resistance to high temperature. For most models, this figure is equivalent to 300 degrees.
Auto power off
The failure of the thermostat may be one of the reasons for the automatic shutdown of the electric oven. The problem may be overheating of the oven, as there is no automatic shutdown when a certain temperature is reached. The way out of this situation can be simple. thermostat replacement. Repair can be carried out independently at home, consistently carrying out the following steps:
- unplug the appliance;
- remove the power control knobs;
- loosen the fasteners and draw a thermostat wiring diagram;
- replace the thermostat;
- Tighten the adjustment knob to its original position.
It is important to understand that the thermostat and the power switch knob are completely different things. Consult with a specialist before buying new parts for your equipment.
Control panel malfunctions
One of the most important parts modern smart plate designs is the control panel. She controls the cooking process in auto modehelping the hostess save her time. Failure of settings in the control board is a rather rare problem, but sometimes it takes place. Self-repair is a complex process of diagnosing and configuring each element of the system.
As a rule, in such cases, they rarely make a purchase of a broken link and resort to simple repair of electric stoves. The price for the purchase of new equipment is much higher than the cost of repairing it. If your stove is subject to repair - it makes no sense to pay extra money.