What could be the consequences of not turning off the iron

Buying an iron, you get a technical passport to the goods. It clearly describes what will happen if you do not turn off the device: the consequences are very bad. But everybody knows situations when certain things reach automaticity, and it’s hard to remember what was done and what was not. If in the mornings you run out of the house in a smoothed shirt, and spend all day in torments about the included iron, use our advice.

Forgot to turn off, what will happen?

Turned on electrical appliances create an increased risk of damage, the ironing device is no exception. What happens if you leave and don't turn off the iron?

1. In bad weather conditions (heavy rain, gusty winds) power line failures can occur, leading to short circuit. In this case, the microcircuit will burn on all electrical appliances included in the socket.
2. With a strong draft, the iron may fall onto the floor: fire not escape.
3. Even taking into account the fact that almost all modern devices for ironing are equipped with an automatic relay, the probability of its failure during long-term operation is present.
4. The included technique exacerbates problems with damaged wiring.
5. If the hot device is turned off, you can get severe injury and burn.

In the case when contact with flammable objects could not be avoided, it is necessary to urgently perform the following steps:

• turn off the iron from the outlet;
• open windows and air the room from the smell of burning;
• clean the ironing surface of the footboard of the appliance.

How not to forget to turn off the appliance?

To maintain peace of mind regarding the protection of property from fire, it is necessary to develop a certain daily habit. The action template may be something like the following:

1. Every time before leaving, train yourself to check the condition of electrical appliances.
2. Do not leave the equipment plugged in, even in standby mode.
3. To get used to clean the ironing board after each ironing. In this case, the iron will turn off at 100%.
4. On the front door hang an interesting smiley, reminiscent of caution.

How to minimize the risk of fire.

From the point of view of fire safety technology, it is desirable to arrange everything in the house in such a way as to reduce the prerequisites for ignition to "no." For these purposes, it is very necessary to approach the choice of iron.

The device must be equipped with a protective relay, which disables the heating function with a sufficient level of heat.

In the horizontal position, the protection should operate so that the device is turned off completely in a short period of time. This additional feature will avoid unpleasant moments, even if you are at home and distracted by other household chores.

It is necessary to take care of objects located near the heating device. The highlights are as follows:

1. Use heat resistant fabric on the ironing board. If the iron falls on the table, it is able to withstand the high temperature until the sensor works and the device turns off.
2. To choose steady ironing machine. This will avoid tipping over with awkward movement. This is especially important when small children and pets live in the house.
3. For ironing, it is desirable to choose a place with non-flammable or slightly flammable materials for wall decoration and floor covering. Avoid close location of curtains. There should be no foreign objects on the ironer. If you use an ordinary table for ironing, you should take care that there is no paper, wooden or plastic things around.
4. Periodically check technical condition of sockets.

Safety iron mechanism

Repeated cases with untimely disconnection from the iron network create prerequisites for selecting an instrument with safe functions. Irons that are made using high quality material and parts will not be cheap. And this is a very important factor during long-term operation of the heating device. Details should not melt, and the temperature relay should have a long service life.

Since thermal sensors are provided in all modern versions, it is worth choosing a device of a reputable brand.

As an additional protection, manufacturers set touch sensors. They react to movements of the appliance in the process of ironing. As soon as the iron stops working, the heating is turned off. Despite the fact that high-quality equipment provides some kind of insurance, you should not abuse it! Turned off the ironing unit and other electrical appliances reduce the number of concerns.