Methods for cleaning the filter in a washing machine brand Indesit

If you notice that your laundry has become noticeably worse, the problem is most likely due to a clogged filter designed to protect the machine from getting unnecessary parts inside. And now it is time to learn how to clean the filter in the washing machine indizite, and whether it is possible to do it on their own without the help of experts.

What is a filter and how to find it in a typewriter

Each automatic type washing machine has a special filter, which is a pump drain filter associated with the pump of the device. It performs one main function - cleans the water during the washing process, and also prevents various garbage and small items, such as buttons from clothing, from getting inside the tank. Not all owners of styralok know exactly where the filter is located, but it’s best to find out in advance to understand how to carry out the cleaning process at home.

Important! In some serious cases, you should not disassemble the machine yourself and seek the help of specialists..

This important detail is usually located at the bottom of the device, regardless of the type of loading. You probably already paid attention to the small closed panel below, it is for her and you can find a drain filter. To remove it is quite simple, for this you only need to pry it with a flat screwdriver or not sharp scissors. Then you can see filter coverwhich usually has a special pen. Most often, the part itself in machines from the company Indesit is made of black material and is quite easy, but sometimes it can be located in non-standard places. When you safely remove the cover, you should proceed to the next important step - removing the part.

Part Extraction Technique

After you managed to find the filter, it’s time to carefully remove it so as not to damage the fragile parts of the machine. You must always remember that in devices from the company Indesit washing machine mains filter made of very thin plastic. It is for this reason that during the procedure it is necessary to very gently pry it with the same screwdriver on both sides and remove it only when it starts to move away, but in no case should it pull itself.

In general, it is not so difficult to pull it out of the washer machine if it is a question of standard filters: you just need to turn its cover counterclockwise. It should prepare in advance dry clothable to fully absorb water. This is necessary in order to quickly wipe off the excess liquid that will certainly flow out during the removal of the filter. Place a rag directly under the panel covering the filter pump, and only then begin to remove the part. To do this, you need to do only a couple of turns counterclockwise and extract it in the direction of itself. After that, you can already proceed directly to cleaning the parts, using various methods. Cleaning washing machine filter usually does not take much time if you do everything right.

Cleaning options

Standard filter washing machine indezit usually clogged every six months, at this particular time it needs to be pulled out and cleaned manually. To prevent any problems in the process, some people prefer to rinse the part under running warm water. If there is strong contamination, clean it with a regular toothbrush and soak it in water for a few hours. citric acid to eliminate excess lime and bad odor. In the instructions for some models of washing machines you can find a step-by-step guide on how to clean the filter of the washing machine. Most often it looks like this:

• remove all laundry and unplug the device;
• find the location of the part and the panel cover;
• opening the lid, carefully remove the part;
• clean the filter completely, located there, and the hole itself, where it is inserted;
• After cleaning, put it back and close the lid.

Important! In the very hole for the filter, too, garbage often accumulates, you can remove it from there, after shining a flashlight for convenience.

Possible problems

If you conduct this procedure for the first time, you may well have some difficulties.Sometimes the filter inside the panel can be pulled out far from the first time, or, if you're too overdoing, plastic cap may break. Usually such situations arise when the part has never been pulled out of the machine since the day of purchase, and it is so clogged that it has time to get stuck inside the hole. In cases where the part cannot be retrieved independently, it is best to invite an experienced specialist who will know exactly what to do in this case.

You should never wait for the moment when your washing device is completely clogged and will cease to perform its duties properly. This problem is very easy to prevent, if you carry out a test cleaning every six months, then your washing machine will serve you as long as possible.