House mate: mini vacuum cleaner

Mini vacuum cleaner is a kind of alternative to the traditional device, which in some cases shows a great result.

Cleaning in your own house is quite responsible and important event that requires periodic execution. Its implementation makes it possible not only to maintain the house clean and tidy, but also to maintain human health. At the same time, for most of us, a full-fledged cleaning implies a long and laborious process, which includes the assembly, use, cleaning and washing of a bulky vacuum cleaner. However, these rather tedious processes can still be avoided.

Using a mini vacuum cleaner in the household

The use of hand-held vacuum cleaners was quite popular about 20 years ago, when similar products first appeared on our market.However, the models of those years were not very functional and did not differ in good quality, which led to their rapid oblivion. Since then, quite a lot of time has passed, during which manufacturers of mini vacuum cleaners took into account all the shortcomings of previous models and created truly high-quality devices.

Today the market of household appliances is saturated with various models. handheld vacuum cleanersdiffering in their design, design and feature set. In addition, each of these products is able to satisfy the wishes of the buyer and become a faithful assistant in the implementation of cleaning the house. In turn, you can choose the appropriate option specifically for yourself, based on the functionality of the device. In general, any manual vacuum cleaner is characterized by the following advantages, which allow to simplify the cleaning procedure and significantly reduce the time for it:

• relatively light weight;
• small dimensions;
• usability;
• low noise level during operation (for which they are often called noiseless);
• fairly simple design;
• ability to clear any gaps.

All these qualities allowed the manual vacuum cleaner to take its place of honor in the homes of people, replacing bulky and heavy traditional products.At the same time, working with such devices is not only pleasant, but also quite convenient. However, they are not able to completely replace their predecessors, because they are not able to cope with large pollution, not to mention wet cleaning. Their main purpose is the fight with small debris such as crumbs or dust, as evidenced by the relatively small volume of the container.

Hand vacuum cleaner do it yourself

Mini vacuum cleaner for home can be a great helper in cleaning. One of its greatest advantages is the ability to clean almost any, even the most hard-to-reach surfaces. Gaps in the floor, gaps between the baseboards, sofa folds or a computer keyboard - all these places and getting rid of deposits of dust will not be difficult for a handheld vacuum cleaner. However, the most significant disadvantage of such products is their cost, which can reach significant values. Far from everyone, having available a traditional vacuum cleaner, will decide to purchase a smaller version of it, even if it is necessary.

There is a way out of this situation, and it consists in the independent creation of an alternative version of the device. Hand-made vacuum cleaner, made by hand, can not only significantly save material resources to purchase expensive products, but also provides an opportunity to get an excellent device with high functionality. To create the simplest version of the product you will need the following materials:

• fan;
• plastic bottle;
• a rubber tube or piece of hose;
• Power Supply;
• insulating tape;
• a piece of foam rubber.

It is quite simple to create a mini vacuum cleaner with the help of the above tools, and its capabilities will practically not differ from the factory counterpart, which has a high cost, but also a prettier appearance.

How to make the simplest mini vacuum cleaner yourself

The simplest mini vacuum cleaner, made by hand, makes it possible to clean almost any hard-to-reach places. Knowledge device devices will facilitate the task.

At the same time, its functionality depends on two values ​​- the diameter of the tube and the power of the fan.These parameters are the most important and determine the effectiveness of the device. An auxiliary element for the creation of a manual vacuum cleaner is a stationery knife, with the help of which the majority of actions are carried out.

Initially, you need to take a plastic bottle and cut it in half. The upper part of it - the one with a cork, will serve for the manufacture of our device. Next, a small hole should be made in the lid so that a rubber tube passes through it. However, it should not be overwhelmed, since the slightest bend will inevitably affect the suction of air, but it did not dangle either. She should sit tight enough, but not be transferred. For greater sealing the entire structure can be wound with tape. On the reverse side, between the neck and the edge of the cut, you must put a piece of foam rubber, which will serve as a kind of filter.

Now it's the turn of the fan. It can be taken absolutely any design, as long as it fits freely in the plane of the bottle. The best option is to use a computer cooler, which not only fits harmoniously, but also will work perfectly thanks to its design.Secure it also with tape.

As soon as this stage is completed, the mini vacuum cleaner is completely ready; it only remains to connect it to the mains. To do this, connect the wiring leaving the cooler with the power supply.

It is very important to observe the power, since its disproportionate values ​​will lead to the failure of the fan or it simply cannot rotate normally.

Fixing the wires can be performed using the same electrical tape, but it is better and safer to use the connecting bus.

After that, you need to turn on the power supply in the outlet, and the mini-vacuum cleaner will immediately come to life, showing full readiness for cleaning and cleaning the most secluded corners in the house.

Conclusion on the topic

Mini vacuum cleaner can become an indispensable assistant in cleaning the house. With it, clearing the most inaccessible places will not be easy. Creating a similar device with your own hands, you can save a significant portion of material resources, while obtaining an excellent functional and practical product. In turn, it can be done in just 15-20 minutes, using only available tools,and the result of such works will exceed all expectations.