Creating a construction vacuum cleaner for the house with your own hands

At the moment, the market is flooded with not only universal home vacuum cleaners, but also special industrial. But if you want to save money on their purchase, you can try to make construction vacuum cleaner do it yourself

Features of models

Such devices are quite expensive, but they are necessary during repair work in order to quickly clean up the workplace. With the help of an ordinary vacuum cleaner will not be able to achieve high-quality cleaning, as they are not intended for such garbage.

Household models are not able to quickly and efficiently clean the surface from oil, chips, plastic fragments, glass, etc.

Before as make such a vacuum cleanerneed to decide with the front of work, as some models are designed for cleaning fluid or even small gravel. After the working principle is determined, all other parameters should be considered.

Construction Vacuum Cleaner

There are many real-life examples of self-creating industrial vacuum cleaners. Consider the production version of the old model "Rocket".

What is required for work?

If an old “Rocket” vacuum cleaner was lying around at home, it would be an excellent consumable for building construction (for more details on what else you can build, see the articlewhat you can do yourself from the old vacuum cleaner).

In addition, you will need the following tools and materials:

• Bulgarian;
• screwdriver;
• bandage;
• spout 200 mm in length and 40 mm in diameter;
• scissors for metal;
• plastic bucket with lid and handle;
• glue;
• insulating tape;
• drill.
• Scotch;
• self-tapping screws.

We are starting to build a construction vacuum cleaner

Initially need to do waste collector which needs some work. Armed with a screwdriver, unscrew the wheels from the base of the vacuum cleaner and glue all the holes with adhesive tape tightly. After the nameplate is removed, its opening must also be taped.

Removed all the latches. Now with the help of the grinder, it is necessary to free the case from all the rivets and put the cap, previously wrapped with insulating tape. Next, make a hole in the bottom with a drill, size 43-45 mm. As the gasket is taken sealant, about 3-5 mm in thickness.

In the garbage can, which was converted, you need to fold the gasket, the centering nozzle and the bucket lid. Take a 2 mm drill bit and use the drill to make holes that will continue to hold the lid.

Further holes are made already outside the suction inlet. Before you do this, you need to put marks at an angle of 15 degrees. With the help of scissors for metal, make a hole. After that, attach the nozzle with screws. For maximum tightness, you must thoroughly soak the bandage with glue and wrap it around the pipe.

The nuances of such a device

In order to assemble your construction vacuum cleaner, you need to have on hand power unit, the turnover of which must be at least 6,000. As for the material at hand, it can almost always be found at home.As a donor for the engine, you can use not only the old vacuum cleaner, but also a washing machine.

Some craftsmen use power units from kitchen machines for a homemade vacuum cleaner, but do not forget about their tendency to frequent breakdowns due to their inability to withstand high loads.

If the power unit is found, then you need to take care of it. tightness. You will also need a fan. Very often, an ordinary bucket is taken as the housing for a vacuum cleaner, in which a hole is made. Naturally, you need a trash bin and a filter that you can do it yourself.

The video presented shows several variations of the construction of a construction vacuum cleaner. It is recommended to study them if you decide to create a homemade model.