Steam droplet apparatus - a new leader among heaters

Every year there is more and more heating equipment competing with the usual gas or central heating. New products that are worth paying attention to are steam droplet heaters.

Principle of operation

A steam droplet heater is a newest heat exchange unit that can heat residential and public spaces, raising the temperature in them to 24 degrees. It consists of the following elements:

1. Sealed heat exchanger, insulated inside the device.
2. Electric heating element, which is located at the bottom of the apparatus.
3. News block with a control system.

When the heater is turned on, inside it is working to turn air into steam:

1. Eating from the electrical network, the heater heats water.
2. Water turns to steam.
3. Rising, the steam heats the body, turns into condensate and gives up its heat to the surrounding space.
4. The water in the form of condensate again rolls down to the ten, and the procedure is repeated.

In size, a vapor droplet heater is no larger than a standard battery, but several times larger than systems based on fuel combustion. Steam heater running without pipes. He needs only the power grid. Even with a sharp power outage is able to produce heat for some time.

With a long shutdown and extreme cold, the device does not defrost, because it contains a small amount of water. Water turns into ice and does not destroy the structure. To defrost the ice, it is enough to turn on the machine in the outlet, and it will work as usual.

For each room, you can choose your own temperature or combine the devices into one common control system.

Since there is no oxygen inside the vapor-droplet heater, it is not afraid of corrosion. The exact calculation of water and heating power exclude the explosion of the device. Its service life is about 30 years.

Application area

Steam-drop heaters are often used during construction or repair work, as a heating system in kindergartens and schools, hospitals and other public institutions.

The heater will help out where there is no possibility to install independent or central heating or it is impossible to do so for safety reasons.

This type of heating is ideal for indoor use. short stay. For example, hotel rooms or recreation centers. In addition, the heater can serve as an additional source of heat or be used for heating loggia.

Positive characteristics

The advantages of a vapor-droplet heater include:

1. Compared to other heaters operating on the network, consumes two times less electricity.
2. The device not only does not dry the air, but rather moisturizes it.
3. In case of problems with electricity, the device automatically starts working in the last specified mode.
4. The minimum risk of explosion and fire, as the aluminum frame perfectly protects the heating element and the coolant.

Negative sides

The disadvantages include:

1. Relatively low temperature - 24 C. Some prefer hotter modes.
2. Electric heating has not yet won the trust of consumers.
3. Some experts do not recommend leaving the working device unattended.

Device device

The structure of the vapor-droplet systems is markedly different from the usual heat exchangers. The main difference is in the heat pipes.

A tube is a device for transferring heat from a compartment with hot water to another section with a cold one. It is considered a perfect part for heat transfer.

The device can give a much larger amount of heat compared to a conventional heating system. And all this is available with small dimensions. As mentioned above, steam heaters are identical in size to traditional batteries.

How to make do it yourself

The scheme of operation of the device is simple, so steam droplet heaters are quite possible to do it yourself. To do this, you need to stock up on the following materials:

• A tube of copper.
• The valve.
• Copper or stainless steel wire.
• The lid.
• By welding

For the case you need a pipe made of aluminum or copper, you can also use a stainless steel.The metal pipe is filled through a lid with a smaller diameter pipe attached to it, one side of which must be kept free from air. For the filling pipe, it is necessary to install a valve of a material that is compatible with the main one. The next step is to weave a stainless wire mesh to make a wick.

Before making a homemade heating apparatus, it is required to study the assembly information in detail. It is better to use ready-made instructions and not to ignore the described items.

If you have the skills to work with electrical engineering, you can create your own various types of heaters: portable, candlestick, oil.

It would not be superfluous to listen to the advice of professionals. And it is better to buy a ready-made steam droplet heater and enjoy the warm and humid air, without danger to life.