Overview electroconvectors with electronic thermostat
Electric convector with thermostat - heating equipment that maintains the desired temperature in the house. Built-in electronic thermostat allows you to accurately regulate the heat with a deviation of 0.1-0.30WITH. Thanks to the beautiful design, safety and efficiency of modern convector with an electronic thermostat deserves the attention of the consumer.
Content
Species
Among the main types of convectors with electronic thermostat distinguish such devices:
- Wall mounted. The most common type of heating equipment. When using this technique, the accumulation of warm air occurs at the top, and cold - at the bottom.With high ceilings, uneven distribution of air flow will be a significant disadvantage.
- Outdoor. Mobile equipment is used as an auxiliary heating device.
- Floor. Convectors of this type are designed for use in office and residential areas where strong noise or design solutions prevent the use of devices with forced convection. The equipment is perfectly compatible with the floor heating system. In-floor electric convectors are made with angular joints, arcuate, wavy, with a roller or linear grid. The heating channel is of different sizes and is made of granite, marble, wood. The disadvantages include the high price and complicated installation of the device.
Features of the device
The structure of the electric convector will differ depending on the type of heating equipment. Design wall electric heater consists of the following components:
- instrument case;
- heating element (TEH);
- off / on buttons;
- cord with plug;
- thermostat;
- grille with air curtain guides;
- thermal overload protector that protects against overheating;
- tilt and tamper-proof sensors (additional options that depend on the model).
Design floor embedded The heater is slightly different and includes:
- decorative frame profile;
- roll-type grille made of anodized aluminum;
- high-performance convector;
- EC fan;
- twist protection at the wire connection;
- mounting feet for height adjustment.
Note! Convectors with an electronic thermostat are designed for heating living spaces with an optimal level of humidity. It is forbidden to use the device in swimming pools. Models with appropriate protection are marked IP24.
Principle of operation
The basis of the convector electronically controlled lies air circulation with different temperatures. Inside the device is a heating element, on the surface of which the holes are located. Thanks to the lower compartments, cool air flows freely into the device and is heated by a heating element. After the heated masses rise and exit back through the blinds at the end of the convector.
The heating element in the technique stands TEN tubular typewhich is made of a special alloy. The material is heated to a certain temperature, and after a while it becomes warm in the room.
The principle of natural convection allows to provide high efficiency of heaters of this type - from 90% and above. This means that electricity is economically used without a large percentage of heat loss, leaving only for heating the air.
Features and purpose of the electronic thermostat
The thermostat is installed in both expensive and budget models. Its main task is to maintain a certain temperature at a given level. The device consists of a plastic case on which an electronic display is installed. The thermostat can be made with a scale in degrees and an LED. The backlight allows you to use in poor light. The display shows: the values of the set temperature and mode of operation, the selected program, the percentage of battery charge.
The main features of the device.
- The ability to control the operation of a convector with different functionalities: frost protection, manual setting of temperature, operation in cooling mode, night economy mode.
- Operating temperature range from 0 to 45 degrees.
- Power supply: AA batteries.
- The presence of several programs that include individual customization.
- The temperature setting range is 4 to 35 degrees.
- Using the device saves energy by 30%.
Installation Methods
There are 3 options for installing the device.
- Wall mounting. For him, choose a wall under the window, preventing fogging and the occurrence of draft.
- As a separate heating equipment.
- Installing a built-in convector in the floor. A huge disadvantage of this option - installation is carried out in the process of repairing the coating.
Proper installation is a guarantee of safety, a long life of the electronically controlled convector and the correct operation of the thermostat. At wall mounting observe the distances shown in the diagram:
- from the floor to the convector at least 80mm;
- from the top of the case to the ceiling or window - at least 120 mm;
- from side to wall - at least 50 mm.
Tip! Carefully read the instructions before installation. This will protect against problems in the operation of the device.
Device advantages
When choosing electric convector with thermostat Pay attention to the following advantages of the device:
- Environmental friendliness. When heating a room, no harmful substances are emitted into the space, the air is not dried out or burned.
- Easy installation. When installing on the wall, you will need to drill several holes, as shown in the instructions.
- High efficiency.
- Electronic control.
- The presence of a thermostat.
- Long service life. The average lifetime of the device is about 20 years.
- Noiselessness The device works without a fan, pump, so does not create unnecessary sounds.
- Price. From a diverse range, you can choose models that are no higher than convectors without a thermostat.
- Security. It is not the body that is heated, but the heating element. The device has no sharp corners.
Proper care of the device
To maintain the characteristics in working condition, use our tips:
- regularly wipe the top and bottom holes of the louver with a damp cloth;
- it is recommended to use a vacuum cleaner to remove dust from the grates;
- do not dry the laundry on the appliance;
- make sure that the curtains do not block air holes on the outer surface of the device;
- with a simple electric convector to prevent dust and insects from entering, wrap the device in a plastic bag.
Tip! Do not overlap part or all of the grating to prevent damage.
Choosing an electric convector with a thermostat
To select the appropriate option, pay attention to the following characteristics.
- The size. If the convector is installed under panoramic windows, choose a height of 230-300 mm. The standard size of the device is 400-450 mm.
- Type of thermostat. Choose electronic control: the heater is resistant to temperature, accurate and silent.
- Installation method If you plan to hang the convector on the wall, the kit must include mounting hardware. For the location of technology on the floor model with wheels - the best option.
- Power. This parameter depends on the heat loss in the room, mode and season of operation.
Note! If a small child lives in the house, then the wall model is the preferred option.It has no sharp corners, does not turn over and there is no possibility to burn yourself.
Browse popular models
Among manufacturers of thermal electric convectors can be distinguished brands such as Ballu, NeoClima, Thermor Evidence, Noirot and many others. In the domestic market, certain models have earned the greatest popularity. Consider them in more detail.
Thermor Evidence 2 Elec 1500
The electronically controlled convector is made of a housing coated moisture protection composition. With a device power of 15 kW, the heating area is approximately 15 square meters. Additional functions: protection against low temperatures, splash protection, overheating shutdown. There is a closed heater from rain and snow. The compact dimensions of the device 60.6 x 45.1 x 9.8 cm allow the heater to be mounted on the wall. Convector with accuracy maintains the set temperature. If power surges occur, restores work in the specified mode.
Electrolux ECH / R-1500 EL
Products of the Swedish company Electrolux It is a major manufacturer of household and climate equipment. The ECH / R-1500 EL has a small size of 64 x 41.3 x 11.4 cm and weighs 4.3 kg. The presence of a switch with a light indicator greatly simplifies control of the device in the dark.This model is distinguished comfortable wheelsthat allow you to move the device to another room.
Stiebel Eltron CNS 150 S
The design of the heating equipment of the German concern Stiebel has used many modern technologies. A distinctive feature of the model CNS 150 S - excellent design and high quality. Digital display with wireless remote have long been the hallmark of the company. Power device 15 kW. The small dimensions of 59 x 45 x 10 cm allow the device to be mounted on the wall. Works without noise.
Ballu BEP / EXT-1500
Heating equipment company Ballu It has excellent build quality. Electric convector Ballu BEP / EXT-1500 with electronic thermostat is made of glass ceramics according to strict technical requirements. The model has dimensions of 64 x 41.5 x 11.1 cm. The protective case prevents contact with live parts. Power can be selected in two modes: 15 kW, 7.5 kW. Additional features: timer, overheating shutdown, frost protection.
Kampmann Katherm HK340
Vnitripolny convector German manufacturer with 4 pipe system is of high quality and power. Complete with a thermostat, with which you can set the temperature in the room.heating equipment works in 2 modes: heating and cooling. The decorative grille comes with a convector.
In the market of heating devices, there are many varieties. However, the most popular option for creating optimal heat in the room is considered to be electroconvectors with an electronic thermostat - they have all the advantages of high-quality heating.