Advantages of Electrolux brand convectors

The market for heating and air conditioning equipment offers a huge selection of models from leading manufacturers. Buyers give preference electroconvectors for efficiency, quality, simplicity and convenience. The engineers of the Electrolux company created not only a high-quality heater, but also equipped it with the best functionality. The Electrolux convector has a built-in air cleaning system, thermostat and made of waterproof materials. Depending on personal preferences and operating conditions, each person will choose for himself the optimal heater.

Purpose and main components

Convective type Electrolux electric heater - household appliancedesigned for heating industrial, residential or industrial premises. The design of the unit consists of:

• waterproof case;
• control unit;
• heating element (TENA);
• filter;
• ventilation inlets and outlets;
• power indicator;
• display;
• control buttons of the device.

Electric convector is available in wall mounted, outdoor or universal performance. The first type has, as a rule, a more powerful heating element. Universal models are installed on the wall or placed on the floor.

Note! Some models can be used in wet areas. This is indicated by the IP24 enclosure protection marking.

The principle of operation of the electric convector

The electric convector of the Electrolux company operates according to the principle of the natural circulation of air mass with different temperatures (for more details, see the article how does electric convector work). From physics it is known that cold air settles below, as it has more weight. Therefore, there are lower inlets in the devices.Through them, the air flows to the heating element and, when heated, exit through other openings. The heating element can be 3 types:

1. Monolithic. The body of the heater is a solid-cast system with ribs. Due to its design, the convector does not produce unnecessary sounds during operation.
2. Needle. The heating element is made in the form of a dielectric plate. It is installed chromium-nickel heating thread, covered with an insulating varnish.
3. Tubular TEN is made in the form of a steel tube into which nichrome threads are installed. The heating element is filled with heat-conducting filling as an insulator. For better convection and heat transfer, aluminum fins are installed on the tube.

The devices are used mainly monolithic and tubular heating elements.

The advantages of Electrolux convectors

The main advantages, due to which buyers choose Electrolux equipment:

• heating elements of the devices do not burn the air and do not emit foreign odor;
• uniform heating of the air in the room;
• the presence of a thermostat;
• possibility of installation in a damp room;
• low heating of the device;
• noiselessness;
• ease of use;
• noiseless operation;
• high level of efficiency;
• simple installation;
• the presence of additional options: protection against overheating, throwing, protection against children;
• long service life.

Specifications

The body of the equipment has an aerodynamic shape, which provides an effective path for convection of air flows. Due to the design of the case, the technical parameters of the device are improved. The unit is built convenient electronic unit with LEDdisplay Thanks to him, the device is controlled. The panel shows the parameters of the temperature, the selected power mode, the timer.

Electrolux electric convectors have a built-in highly sensitive thermostat, which allows you to set the optimal mode in the room with high accuracy, to program the device on / off time. Electroconvectors operate at half and full power. To reduce the load on the grid use economy modewhich also saves electricity.

A distinctive feature of the models of this brand is a system of integrated filtration of incoming air flows. The main and additional filters are supplied with the heater:

• antidust;
• carbonic;
• Nano filter;
• kakhetinovy.

Cleaning products can improve the characteristics of the air in the room, protect the heating element from dust.

Note! With intensive work of cleaning filters, replacement is carried out once in 3-6 months.

In addition, the models from Electrolux are equipped with the following additional options:

1. AUTO RESTART. If electricity was switched off for a short time, when turned on, the device automatically switches to operating mode while maintaining temperature and power.
2. "Overheat protection". After the temperature has reached the upper limit, the circuit breaker is activated. The heating element will stop working.
3. "Child Protection Lock".
4. "Antifreeze". The convector, when selected, maintains a temperature of 5⁰WITH.
5. "Protection from moisture."

Features of operation

To ensure that the device does not fail, and you do not need to repair, follow the recommendations:

• during installation and installation secure the heater in a stable position;
• do not use the device in an open space all premises;
• In order to avoid electrical overload, do not use the same outlet for two electrical equipment;
• do not cover air inlets and outlets;
• do not dry clothes and laundry on the appliance;
• recommended temperature for handling and storage: -25- + 30⁰C and -20- + 80⁰C, respectively;
• periodically wash the antistatic dust filter (at least 1 time per month);
• Recommended humidity for handling and storage: 40-90%;
• wipe the case with a damp cloth without any foam detergents, solvents or abrasives;
• To fold the device, wait until the case is completely cooled.

Important! In order for the device to function properly, the voltage level in the electrical network must be sufficient and comply with the technical parameters that are indicated on the device case.

Main series of Electrolux convector equipment

The manufacturer offers heating equipment of the following series:

1. Rapid. Models have a powerful heater and a surface that resembles a "shell". The length is increased to increase the heat transfer area. The modification is presented by the company in black and white.
2. Brilliant. Devices differ in design appearance with monolithic air outlet grids.Electronically controlled convectors have a thermostat. Produced in three versions: 1000, 1500 and 2000 watts.
3. Air gate These are wall mounted electric convectors with the function of air purification in the room. The equipment is equipped with the innovative Gate BIO filter system.
4. Universal devices have an electronic thermostat. The panel of convectors is glass, behind which there is a special protective screen made of fiberglass.
5. Air Heat. The SX-DOUS heavy-duty heating element of the monolithic structure allows the space to be heated as silently and quickly as possible. The design of the body is made of a trapezoidal shape, which increases the heat transfer area. The life of the device is at least 25 years.

Overview of popular models with thermostats

Electrolux electroconvectors create warmth and comfort in the house as an additional or sole heater. The devices won the trust of users due to the beautiful design, reliability and high functional qualities.

Electrolux ECH / R-1500 EL

This model with electronic control features a stylish design. In the popularity rating among 1.5 kW devices, this convector comes first. With a small size of 4.3 kg, the device can heat a room of 20 square meters. The switch is made with light indicators. The moisture-proof case will protect against accidental burns. The wheels allow you to move the electric convector to another room. Thermostat adjusts power levels: 750, 1500 watts. If the appliance overheats, the program will turn off the heating element. The advantages include noiseless and economical power consumption.

Convector Electrolux ECH / R-1500 EL

Electrolux ECH / B-1500 E

The front panel of this model of the Electrolux company is made of heat-resistant black-and-gold glass ceramics. Manufacturers have provided two power modes. Protection against tipping prevents the device from being safely placed on the floor. For safety, thought out the function "Child Lock". Weight about 6.5 kg. Anti-shock coating. The electronic thermostat turns on the device with an accuracy of 0.1-0.3 degrees. Simple operation perfectly characterizes the ECH / B-1500 E model.

Convector Electrolux ECH / B-1500 E

Electrolux ECH / AG-1500 MFR

Model with mechanical thermostat can be mounted on the wall or put on the floor. Advantages: strong supports, a unique air purification system, made of quality materials, there is protection against overheating, a small weight of 4.4 kg.Disadvantages: the presence of extraneous sounds during the cooling of the heating element, insufficient heating of the declared 20 sq.m.