Comparison of convector and fan heaters

You can create a cozy and warm atmosphere in the house, not even relying on the services of central heating - for heating it will be enough to purchase the appropriate equipment. Among her certain popularity received convectors and fan heaters. Both devices are on an equal footing: very often it is difficult for potential users to make a choice. Indeed, which is better - a convector or fan heater?

Fan heater

If you look from a technical point of view, it is difficult to understand what is the difference between these devices: both of them "chase" the air with its circulation. Warm streams go up from the unit and push the cold down - and so goes in a circle. However, there are still differences. The fan heater is easy to manage and affordable for most consumers.Such a device can be found in the following versions:

• desktop;
• with placement on the floor;
• ceiling modification;
• "Thermal curtains".

The work goes like this: the air is forcedly forced through the fan through the heating element, from where it is heated into space. There are various modifications of the main part:

• electric coil with heating up to 800 degrees;
• ceramic tiles with the ability to heat up to 200 degrees;
• tubular heater with the same temperature.

Of all the aforementioned, the models that have a ceramic heating element achieved the greatest praise - in this case, heat is supplied in a “pure” form, without combustion by-products.

The advantages of the device

There are many advantages that the fan heater device conceals in itself.

1. Warm up speed. If you choose the right power, you can achieve a warm atmosphere in a few minutes.
2. Compactness and mobility. These two combinations allow you to transfer small equipment from room to room to warm the room where it is needed.
3. Affordable price. The criterion speaks for itself - on the shelves of stores such a product does not lie long.
4. Modes of different temperatures - you can choose the necessary.
5. There is an opportunity to choose a design suitable for your interior.

A fan heater, for example, can dry a cottage well after the winter season. He will find another worthy application in rooms with drafts.

Cons of such technology

There are certain disadvantages:

1. During the work there is quite noisy noise.
2. If dust particles enter the open spiral, an unpleasant smell cannot be avoided.

When buying a fan heater, you should give preference to devices that have a sponge filter with a rough cleaning (located at the back). Power technology is in the range from 1 to 3 kW. It is worth paying attention to special protective functions: shutdown in case of overheating and at the moment of tipping the device.

Convector

This heater warms the air in the room as follows:

1. Cold masses go inward through the grate located at the bottom of the product.
2. After passing through the element of the heater, the air warms up and leaves already through the grille on the top panel. Then the flow is smoothly distributed in space.

Many of the device models have a moisture protection class (labeled as IP24), which allows them to be used in bathrooms and saunas.

Types of convectors are classified as follows:

• gas;
• electric;
• water;
• infrared.

Among the advantages of technology users note the following points:

• quick warming up of indoor air;
• fire safety;
• various mounting options;
• embedded thermostats (you can set the desired temperature level);
• the ability to create a network of multiple devices (this solution will warm the whole house);
• lack of noise;
• operational safety;
• interesting and original design;
• duration of service.

Even this technique has its drawbacks. Since warming up occurs by natural convection, the room may not heat up quickly. For the same reason, a heater of this type will find it difficult to heat a high room. Also, this technique is very afraid of power surges, and when drafts may malfunction.

All this leaves an imprint on the choice of models with certain thermostat capabilities (it is desirable that it can regulate the temperature to the exact degree).

Making the right choice

In the question of which is better: a convector or a fan heater, one should be guided by the following selection criteria:

1. If it is planned that the equipment will work for years, then it is better to choose a convector. He can also well heat several rooms at once (if connected in a network). The decisive advantage will be the availability in the model. thermostatwhich will allow to set the temperature.
2. When the goal is to quickly heat the room for a short time, it is worthwhile to stay at the heat fan.
3. It will be even more interesting to duplicate the work of both autonomous heating systems: first, the fan heater will warm the air in the room, then the convector, which will maintain the required temperature, will take over.