The advantages of water convectors heating

Few know that water heating convectors are very efficient and very economical heaters that are ideal for any room and can be mounted quickly enough. Such a device allows you to maintain an ideal climate in a house or apartment, thanks to which everyone can feel much better than in a room without it. With the help of convectors, the power of which can be completely different, you can heat the rooms and create optimal conditions for comfortable living in them.

Advantages of water convectors

These devices are able to cut off all the jets of cold air and maintain the balance of heat, as well as distribute the heated air around the perimeter of the room. Thanks to the convector, good circulation is always maintained in the rooms, in addition, they prevent condensate from appearing on windows and other glass surfaces.It should be clearly understood that embedded or any other convectors are noticeably different from conventional radiators by the principle of operation.

The term "convection" itself is the transfer of heat energy by means of air streams that come from a heating element. In the process of heating, the air becomes much lighter and is able to rise upwards, at the same time it collides with cooled air flows and then again goes downwards, where at this time it heats up. Water acts as a coolant in water convectors - similar to conventional batteries. The only difference is that the traditional heater emits heat in its case, and the convector heats the room with ascending air currents.

Water convector can be embedded in any room. It is worth noting the positive aspects of such devices.

1. Innovative and stylish design many devices of this type allows you to easily install them in areas with the most difficult finish, while they are all quite compact and do not cause any inconvenience during operation.Especially worth noting is the wall mounted water convector, which is capable of elegantly complementing the interior of any room.
2. Such units can save an impressive amount of electricity, since heating takes place with the help of hot water, a small amount of which is required by the device during operation. In addition, the room in which the convector is installed, heated evenly.
3. When the convector operates, the difference in temperature between the floor and the ceiling is insignificant, while standard radiators do not differ in such convenience and comfort. During their work, this difference can be equal to 6-7 degrees, which is very noticeable. For this reason, it is best to choose a water convector for the house.
4. Most devices of this type are equipped with special thermostat, thanks to which the user can choose for himself the most optimal temperature, while it will be maintained throughout the entire process of the device. He is able to heat up to 90 degrees, while the heating range of radiators is only 30-50 degrees.
5. If there are several convectors installed in the house, for example, in the floor, they can be combined into unified systemwhich is fairly easy to manage. The absence of the possibility of potential ignition makes the devices of this type the most popular, based on security measures, in addition, they can be purchased at a very reasonable cost.

Available types

Innovative and most convenient convectors of water heating are divided into several categories depending on their functionality, installation method and other parameters. They can vary in size, power, control method, design, many manufacturers offer a large selection of options available, but it is worth remembering that currently there are three main types of such devices that you should be guided by. This list includes:

1. Devices wall type, whose power can be quite high, in addition, they usually have a small weight and compact dimensions, which makes it easy to fix them on any wall. Quite often, such devices are installed under the windows or in other more suitable places, everything will depend on the decoration and layout of a particular room.
   
2. Floor heating convectorswhich by the design practically do not differ from wall devices. They are solid blocks with a low level of fire danger, which makes it possible to place practically any objects near them. Their power is also quite high, but at the same time they do not dry the air in the rooms and are able to maintain heat even in the most spacious room.
   
3. Innovative and most comfortable built-in options able to fit perfectly in almost any interior due to its versatility and affordable variety of options. Floor convector is usually installed in a special niche or plinth floor. In the same room there may be several such devices that maintain the temperature at the most optimal level.
   

From the entire list of available types, it is especially worth noting modern floor water convectors that can be moved from one room to another, especially if the size of a particular device allows it. Their power is quite high, in addition, many models are able to fully heat even large rooms.

How to choose the right option

When choosing a convector of any type, it is worth paying attention to the most important indicators, especially the power of the device: on average it should be 1 kW per 10 square meters. heated space. The units are ideal for spacious rooms with high ceilings, while many often choose floor type water convectors for rooms that are more compact in size. The cost of such devices depends entirely on their power and configuration.

If we are talking about the device with fan, then for its installation it will be necessary to allocate additional space - it is necessary for a special transformer that is connected to the power grid.

And has convector heightOn average, it usually does not exceed 30 cm, so the floor convector usually does not take up much space. If it is installed in the floor, then due to this installation, you can significantly save free space. When choosing, you should always take into account individual preferences, as well as the design of the house or apartment.