How to choose a trimmer spool

A line reel is by definition a consumable. Each manufacturer of the trimmer produces its own model of the consumables, but there are also universal models. Their disadvantage is that, despite their versatility, they are not suitable for every trimmer. In the article we will show you how to choose a coil for the trimmer and consider the devices on which it is possible to work with universal consumables.

What are the coils

The main advantage of the trimmer is maneuverability and mobility. Its purpose - the grass growing in the suburban areas, the alignment of lawn grass and mowing meadow.

With this device you can mow the grass in places where the gas mower cannot reach. Moreover, with the help of a trimmer, unevennesses and slopes can be easily processed.If you replace the cutting element on the disc, then they can even cut and trim the bushes and flower beds.

The structure of the trimmer begins with the cutting part, then comes the barbell, the engine and the handle with the control mechanism. To work with the lawn on the trimmer is installed coil (head). As a rule, there are three types of reels according to the method of feeding the fishing line.

1. Manual. The principle of operation is easy to identify by name: the line is fed mechanically. In order to lengthen the cord, it is necessary to interrupt the operation of the device and manually extend the ends. Despite the apparent inconvenience, this type of coils is the most reliable in operation. Their use requires a certain skill, but, having learned to work with hand heads, there will be no further difficulties in the future.
   

2. Semi automatic. If it is necessary to replace the cord, it is necessary for the coil to touch the ground. At the same time, press the corresponding button, which opens the anchor mechanism. After opening, the cord is lengthened by centrifugal forces. A special feature in this case is the fact that all the action takes place while the device is running, it is not required to turn it off.Working with a semi-automatic coil is quite simple, unlike manual coil, it does not require skill. However, such heads are a bit more expensive.
   

3. Automatic. Cord is extended by lowering the speed of the trimmer motor. And when the revolutions increase again, the fishing line is automatically fed again. This type of coils is the most comfortable and preferred to use. The disadvantage of this technology is the increased cost, moreover, in connection with adaptability, breakdowns are more common.
   

Having considered all three variants of the coils, it is possible to come to the following conclusions: tame ones are the least preferred in terms of convenience. Semi-automatic, though less reliable, but provides basic comfort. Automatic is the most convenient, but when operating such a reel, users usually complain about the increased consumption of fishing line. Most users and experts agree that the semi-automatic coil is the most preferred and optimal.

As already mentioned above, there is also universal trim coil. A distinctive feature of this type of heads is a wider scope. Simply put, they are suitable not for one model of trimmers, but for several. To make sure that the universal head fits your trimmer, you should study the marking of the part itself. If it coincides with the model of your trimmer, then you can safely buy this coil.

The advantage of universal coils is their relatively low price and widespread prevalence. A disadvantage is the declared support for the trimmer model, although in fact they may be incompatible.

To eliminate confusion, it is recommended to consult with the seller, calling him in advance the model of your trimmer.

Before you buy consumables, you should examine its features in advance. For example, many universal coils are metal, not plastic. Although the fishing line they have, as a rule, from the same universal material as that of most manufacturers.

Differences on the principle of charging line

Types of trimmer coils are different and on the principle of charging consumables.

1. Fast. Nozzle new cord passes without removing the coil from the base. It is very convenient, also saves time.The tip of the new fishing line is pushed into the reel and wrapped around the surface several times. As soon as a certain value is reached, the cord is cut. Typically, this method is used benzokosy.
2. Collapsible type. Based on the name, it is already becoming clear that in order to replace the fishing line, you will need to turn off the ignition and remove the head. A new head is wound into place of the old one, after which the coil is closed and installed back.

Also, different models of trimmers are equipped with semi-automatic heads, which, in turn, consist of a pair of parts, body and spool. Both elements contain springs. The spool is available in various versions:

1. Single section - uniform winding of the fishing line (both parts).
2. Two-section - each tip of the fishing line is wound separately on the corresponding part. As a rule, this type is considered the most comfortable and practical to use. In a two-section spool, the line is never tangled, nor will it be sintered.

Feature: you can easily and quickly turn the spool with one section into a two-section. First you need to find a fairly solid plate.On it the diameter of the spool is measured and cut out along the contour. Thickness taken near the place where the winding of the fishing line. It is important that the circle move freely. The next step is to make an appropriate cut in the ring. Then the ring is put on the spool and fixed with strong fixing glue and adhesive tape. If done correctly, the result will be an opportunity to wind the line on different sections.

Universal coils have several holes (from 2 to 4), which are always located opposite each other. Grass cutting ends protrude from the holes. There are also types of reels where you can only install a fishing line of a certain size. What is interesting, such coils number of holes can go up to 12.

There is an opinion that the more holes through which a mowing line can stick out, the easier it is to use the device itself, but this statement is not always true in practice.

Many users still cannot adapt to working with such heads, preferring coils tested on their own experience.To replace such a line you need to stop the motor, which is not very useful for a gas trimmer. In addition, its use leads to increased consumption of fishing line, and to wield a trimmer with a coil of this type is convenient only on flat terrain, without holes and irregularities. In short, there are clear limitations in use.

Before you buy a trimmer, you should decide on the type of coils that will be installed on it - this will help avoid additional costs.

Popular models

When choosing which coil is best for your trimmer, check out the list of heads that have already earned a lot of good feedback from users.

Bosh K103

This head is universal. Her weight is 300g. It is mainly used in the Hyundai and Makita trimmers. The line of this reel is especially strong and reliable, moderate consumption is observed even with intensive use. Cheat is done automatically. The base (core) metal and breaks extremely rarely. The head has a height of 67mm. It uses a flat cap, which serves for a long time. Soft and young grass mowed perfectly.There are rare reviews that the cover is still erased, but they are extremely rare. The coating is made of durable plastic.

The average price on the market 790-950r.

Coil for EFCO3060

Affordable and not bad in quality head. The system of cheating fishing line is semi-automatictherefore the most convenient. The mounting diameter is 6.6mm. The quality of the material from which the fishing line is made is good, strong. In operation, the coil has proven itself to be reliable, its use is enough for a decent amount of hours. Due to the thickness, the line is able to cope with any grass, even the most densely growing. Adapter in the coil threaded connection. A special cup protects the entire head well from damage. This model is suitable for very many models, incl. "Hyundai", "Intertul", etc.

The average cost of 800-950r.

Flymo 15

Coil (head) with semi-automatic wrap line for universal use. The set includes a rather thin cup, in connection with which the consumption of fishing line can be increased. However, this deficiency is more than compensated for by excellent mowing. The head is set at 74mm, and this is a good result. In the coil is used only thin fishing line. The core is completely metallic. Mainly used for garden trim trimmers from various manufacturers.

The average price tag at 750r.

EFCO 8100

This is probably the best universal trimmer reel.. Included is a special adapter for installation on many models. The type of cheat is fully automatic. The mount has a diameter of 6.2 m, and the height of the coil is as much as 76 mm. A 1.3mm fishing line is used. Fastening is carried out by the screw method. The protective casing is very compact, made of special impact-resistant plastic, but the cup is completely absent. First of all, this model is designed for soft young grass, with the perennial tall grass, it most likely will not cope.

The average price on the market 1290 to 1450r.

Conclusion

Choosing a trimmer is easy. First of all, it is necessary to determine the site, to know the terrain on the subject of potholes, holes, shrubs, etc. It is equally important to be able to choose the right type of coil, because it will help save a lot of time and effort. As you can see, the best choice would be a semi-automatic two-piece coil. Brand producer in this case does not play a major roleYou can buy different coils and stay on the one that will be fastened most conveniently, and the consumption of the fishing line will be at an acceptable level for you.