How to disassemble a mixer for repairing their own hands

Repair of small household appliances, to which the mixer belongs, many users prefer to perform independently. Indeed, no matter what company you use a device - Braun or Scarlett, its internal structure is quite simple. However, when disassembling these simple devices, certain difficulties may arise. How to disassemble a mixer, if it looks like its case is not collapsible, like, for example, many Bosch models? Let's try to figure it out.

Main malfunctions

At first we will consider, in what cases it is necessary to resort to dismantling and repair of the mixer. Common problems with Braun (Brown), Scarlet, Bosch, Ros, and other home appliance mixers include the following.

1. An open inside the power cord. This defect may occur due to poor insulation - frequent bendswhen the cable for laying in the box is rolled up, the internal insulation is broken and the individual conductors are closed.
2. Start button issues - A common problem with Brown mixers. If it sticks, it is necessary to dismantle it and fix the problems; in case of serious damage, install a new button.
3. Electric motor: there are many options, the simplest one - malfunctions in work can be due to brushes that have worn out and lost contact with the rotor. One or several speeds do not work: the main reason may be a malfunction of the switch - its contacts from frequent use may burn or oxidize. Repair is quite simple - it is necessary to remove the regulator and inspect the contacts, clean it if necessary, and if it is fully worn, replace it.
4. Extraneous noise - here there are only two options: bearings and no lubrication in the gearbox. We check the rotation of the bearing, if there is a ringing, then it is necessary to lubricate them, and there is a backlash - only replacement. In the gearbox, due to the influence of kinetic energy, lubricant can accumulate at the tip of the worm gear. Gently press the screwdriver between the gears and take a few turns to make the outside sound disappear.
   

   Gearbox

5. Wear parts - no one is insured against this defect. It all depends on the quality of the metal or plastic, over time, any durable part will wear out.

Knowing the typical failures of a hand or planetary mixer, you can freely repair the product yourself — no special tool is needed for this. Here the main thing is caution, patience and the presence of basic knowledge of product design.

Nuances of disassembling mixers

Before you repair the product with your own hands, you need to disassemble it. There are certain nuances that you need to know in order not to damage the device.

1. The mixer housing is made of durable plastic by casting under strong pressure, it has many special projections and hidden fasteners made of plastic, which can be damaged if handled carelessly.
2. All constructive grooves securely cover plastic plugs that need to be pinched with a thin screwdriver. So, for example, the Braun Turbo mixer has 600 watts around the case and there is a gap that needs to be carefully pulled apart to reach the latches.
   

3. Fasteners are hidden under the self-adhesive labels and stickers to detect them, rather press on the surface,then remove part of the sticker and unscrew the screw or screw.
4. In the design of the body there are also plastic latcheswhich must be handled very carefully so as not to break.
5. After opening the device, take a photo, so as not to confuse the connection of wires during assembly - each node must be installed at a specific place.
   
6. Often the connection of the wire with the terminal is tight enough to remove them, use a screwdriver or special tools - do not need to tighten them with your hand, so as not to disturb the structure.
7. If the wire fits the mounting screw, then the latter must be loosened, and during assembly, check whether there is a bare area outside, only then fasten the screw.
8. Gearbox disassembly produce only when a malfunction is detected; in other cases, only replace the lubricant.
9. Check the integrity of the sleeves for integrity - if there are minor violations of integrity, then immediately change.
10. Extraneous noise is the wear of the bearings; in order to replace them, you need to know the device and have certain skills.
    
11. After eliminating the breakdown, the assembly process is carried out strictly oppositely to dismantling.

If you find complex breakdowns immediately contact the professionals, they will repair the mixer Brown, Bosch and any other quickly, with reliable quality.

Features of dismantle of the Bosch mixer

The disassembly process is performed using a similar technology for mixers. BraunThe zepter was described above, but specific products from different manufacturers have peculiar, albeit small, nuances. In this section we will describe how to disassemble the mixer from the company Bosch Turbofixx 400 watt:

• disassembly begins with the removal of the end cap;
• further, we assort the product case;
• remove the top cover and set aside;
• then carefully disassemble all components of the device into separate parts;
• put the disassembled device on a clean table;
• disconnect the wires from the motor;
• now gently remove the fixation and dismantle the devices where the nozzles are inserted;
• we check the operation of the engine, if everything is in order, then we start the assembly in the reverse order, lubricating the shaft for high-quality work;
• all failures are fixed as assembly.

Bosch will help to fix the mixer videowhere not only the algorithm of complete disassembly is shown, but attention is focused on frequently breaking parts, the options for their repair are given.