What to do if the refrigerator door does not close

A situation where the refrigerator door does not close is one of the most common problems that millions of people around the world face.

The refrigerator is an integral part of the modern kitchen. Its use gives a person many advantages, ensuring the safety of food and promoting its cooling. However, in the work of any technology may cause various kinds of problems that prevent it from fully performing its functions.

Operation of the refrigerator and the need for careful handling of equipment

The refrigerator is a complex fixture consisting of many parts and structural elements.As a rule, all the main electrical and mechanical parts of the device are located inside its body. In turn, the design of the refrigerator doors has a simple structure and does not contain any complex parts. Doors are fully autonomous mechanical components, fixed with special hinges. However, during operation, even such simple elements as refrigerator doors sometimes start to malfunction. As a rule, it consists in the fact that they stop closing normally, are deformed or jammed. The reasons for this phenomenon are as follows:

• often slammed the door;
• dirt has accumulated on the seal;
• the door was subjected to systematic overloads;
• the seal has become unusable.

All these factors are the main reasons, and the state when the refrigerator door does not close is their consequence. At the same time, in order to avoid such problems, care should be taken of household appliances and remember that neglect of it is fraught with minor and major breakdowns. As a rule, their liquidation provides for carrying out repair work requiring a significant investment of material resourcesor even a complete replacement of the refrigerator, which is the most negative consequence of negligence.

Causes of faulty door leaf and the factors that need attention

The reasons for the deformation of the refrigerator doors are trivial, and their effect may be different. However, before calling the wizard, you need to check other options that are not related to malfunctions. First of all, we are talking about a variety of dishes that fill the shelves. Sometimes it is this that causes the doors to close loosely or fail to lock at all. Such a problem is common. Therefore, initially you need to get all the pots and plates from the refrigerator and make sure that they do not interfere.

If this step is not successful, there is another condition that must be met for normal closing of the doors. We are talking about the correct installation, because sometimes the cause of the deformation lies in the uneven distribution of the mass of the product. Optimal functionality of the refrigerator is possible only when it is installed on a flat surface or tilted slightly back.Other options for the location lead to the formation of cracks or complete otlelanii doors from the frame. It is easy to get rid of such problems - you just need to set the refrigerator relative to the level, and the consequences of the skew will go away by themselves.

If no dishes interfere and the refrigerator is installed perfectly smooth, but the problem still remains, then it should be solved in other factors:

• the fixings of the door were loose;
• worn seal;
• the door itself is damaged;
• spacing malfunction.

All these factors can lead to problems, among which is the state when the door of the refrigerator does not close, is not the last. Some of these faults can be fixed on their own, while others only require a call to the wizard.

Ability to eliminate breakage

Why doesn't the fridge door close?

One of the possible reasons is loosened hinges, on which the canvas itself is hung.

In this situation, the seal does not have the ability to fit snugly to the frame, forming a gap. As a result, the doors can not just close poorly, and not be fixed at all.To neutralize this phenomenon, it is necessary to tighten the hinges themselves more tightly, and if this step does not bring results, then they must be replaced.

Functional wear of the door seals can also cause poor door fixation. In this state of affairs, free space appears between it and the skeleton, and such manifestations are nonuniform in the places of the greatest loads. As a rule, the sealant is made of rubber, which over time may well become unusable. Eliminating such a problem can be problematic, since seals are not sold separately.

Another problem that requires a complete replacement of the door, is its mechanical damage. Depending on the nature of the deformation, the door can fully or partially lie down from the frame. To eliminate this phenomenon, its complete replacement is necessary.

To organize a smoother course of the door leaf, the construction of the refrigerator provides for a special part, which is called the spacer mechanism. It is a kind of plastic jumper that guides the door and ensures their uniform movement.As a rule, its failure leads to a distortion and causes an uneven fit of the seal to the frame. This part can also be replaced, which will eliminate the problem.