Why steam ironing systems are better for home

What is better to choose: a regular iron or steam ironing systems for the home? If, when ironing, you are tired of adding water to the device, waiting for the normal steam supply to get better, then modern technology will relieve you of many such problems. Having a steam generator, the ironing system performs its functions 2 times better.

Characteristics of the new device

Manufacturers have taken care of the maximum comfort of women in the process of ironing, now they do not need to use water for spraying. Steam supply is carried out smoothly. Ironing bed linen, clothes can not only in less time, but also with the highest quality.

All this is possible thanks to these parameters:

• high temperature heating tena;
• rapid heating of the sole of the device;
• the presence of a special coating made of titanium or ceramics.

What is the ironing system? This is a steam station, which consists of 3 devices:

• ironing board;
• iron;
• steam generator.

The original inventors of the first ironing systems, which were intended for home use, were the Italians. They began to produce them at the end of the XIX century. The trick of the new idea was to use the ironing board not only for its intended purpose, but also as a tool capable of ironing clothes and steaming. This was made possible by heating the board. Later fans were built into the device, which functioned in various modes.

The buyer can purchase only 2 household appliances (an iron and a separate device providing steam) without an ironing board. Then his purchase will be called the steam station. The cost of this kit below.

The main advantages

Do you need a steam ironing system in the house if you already have an iron? Since the power of the system is much higher than that of an iron, with its help it is possible to better steam off clothes and ironing in an upright position. In addition, the device has certain useful features that allow you to perform cleaning around the house. We are talking about the ability to remove stains, to clean various surfaces without using chemical agents.

An important advantage can be considered a high degree of quality of formation of steam. In the systems in question, steam is supplied continuously in large quantities at high pressure. This property is very valuable when a woman has to constantly smooth out clothes or other items made of delicate fabrics.

Ironing of any tissue with the help of the system is carried out as efficiently as possible. Through this device will be able to iron even the most fastidious fabrics. It can be window curtains, a blouse or a sweater with decorative elements, beads, linen, cotton clothing.

The user is able to independently control the entire process. It can set a suitable temperature, steam flow rate, use universal possibilities for surface heating, etc.

Steam ironing systems are very convenient to use and store. Every detail is needed not only to ensure high-quality ironing, but also to create maximum comfort.For example, ironing systems are characterized by the presence of large vessels that contain water. Therefore, it is not necessary to spend extra time to fill it with liquid often.

Although each ironing system is capable of performing many diverse operations, outwardly it does not look cumbersome. The device is compact, it is very convenient to move it, because the system is equipped with wheels. In the house of such a household appliance does not take up much space, as you can collect it in the minimum time.

The cost of the product is quite acceptable. It is fully justified by high quality, functionality, the use of modern technological solutions. At the same time, the service life of such a product is long, so all costs will pay off.

Important device parameters

If you buy a steam iron, the ironing board is not included with it. In most models, the fixation of the steam generator is performed on the edge of the board, sometimes on the legs. The steamer fulfills its purpose with high quality, as the steam generator holds a large volume of water, which is then converted into steam.

Standard wooden ironing boards quickly swell and become unsuitable for further use.And in steam ironing systems has its own specific design, which has a mesh coating. It can easily pass moisture, steam. Advanced models supply air, create a vacuum.

The air is exhausted directly onto the tabletop, therefore, there is no tight pressing of the fabric to the surface, and the pile of fabric is not wrinkled. Due to the vacuum, the opposite effect is provided, which allows the fabric to be fixed in the process of ironing. Due to the close fit, it is possible in the shortest possible time to fold, the arrows on the trousers, the frill on the skirt, etc.

Since the boards of the systems have a heated surface, the rapid evaporation of moisture from the inside of the moistened tissue is carried out. Thanks to this, the ironing process becomes fast. It is very important for bed linen. The surface heats up to 90 ° C, so you can only iron the fabric from one side.

When buying a system, you need to pay special attention to the design features of the location of the steam generator. The design must contain additional compartments that allow the iron and other devices to be stored.In some systems, the legs can not be folded, but they have a high degree of stability.

The kit often includes a small shoe, which helps to iron clothes with sleeves. Sometimes the system includes a brush or a steam gun. With the help of a brush, you can smooth the fabric only with steam without an iron. This is good for those things that can not be affected by a hot iron.

Technology use

In order to disassemble the system and install it in the room, you must press the button and pull the bottom of the board. Here the design is practically no different from the process of opening a regular board. When the legs go, you should install the necessary height. At one end of the board there is a special groove in which the iron is hidden. In order for the cord not to interfere in the process of ironing, a special antenna with a connector for the cord is installed on the edges of the board.

Each system has a removable cover that can be changed. You can simply take it off and put it back on. Before using the system, it is necessary to pour a special powder into the water filter. These are granules against scale, through which water will pass and be filtered.After that, water from the tap is poured into the container and inserted back into the structure.

When the iron is not used, but the system is turned on, a special protective nozzle is put on its sole. Thus, you can protect yourself from fire and do not spoil the board. From time to time, the sole of the iron should also be cleaned. To do this, take a special thin device, similar to a needle, and clean them all the holes. Then you need to release steam from the iron so that the accumulated dirt comes out with the air.

After that, it is necessary to clean the entire sole with a special material, on which you just need to walk several times with an iron. If there are dirty areas, they are wiped with a soft brush, then wipe the entire sole with a soft cloth.

If during the use of the system there are any problems, the system needs to be diagnosed or consulted with the specialists of the service center. Every year it is necessary to test the system for problems and breakdowns. This is the only way to extend the operation of the steam structure.

Independently after every 10 hours of work, you need to flush the system, replace the granules from scale. It is necessary to carry out the cleaning of the sole of the iron in time.Such trifles will secure the system from costly breakdowns.

The presence in the house of a steam ironing system will relieve the hostess from many problems, and the ironing time will be significantly reduced. In order to correctly determine the purchase, you must be familiar with the technical characteristics of the device.