Water for an iron: what can be poured and what is not

They are greeted by clothes, the old adage tells us. To make a first impression, you can wear a well-ironed shirt. This helps us iron. But not always the technique works properly. When ironing, stains or clothing may deteriorate. One of the reasons for the malfunctioning of the device may be water for the iron, which you pour when using it. What water should be poured into the iron? Need to pour boiled or better to use special? Let's try to figure it out.

Boiled

Despite the many ways to clean the water that flows from the tap, it can be called the most worst case for use. Even if you boil it, there will still be elements in it that will adversely affect the operation of the device.

Some models of irons are equipped with a descaling function. This option allows you to use tap water for ironing things.

Experts recommend pouring along with boiled or tap water demineralized, in a one-to-one ratio. This will protect the device from scale and save money on the purchase of a special liquid.

Special

In appliance stores you can often see special water for irons. “How does it differ from ordinary water?” - often ask customers. It's simple. Water is designed to help when working with the device. Its use will save the iron from a scum, will not leave spots on fabrics. This is achieved with the help of special water purification methods, which allow you to remove various impurities and salts from it - everything that may adversely affect the operation of the device.

There is also a special flavored water, which gives things a light aroma when ironed. But the components used in it can lead to incorrect operation of the device or stains on clothes.

Distilled

This water can be safely poured into the iron, it is also well cleaned, as well as special.But she has a small minus: the boiling point of distilled water is quite high. It causes difficulties with evaporation and can provoke damage in the evaporator chamber.

To achieve efficiency when using distilled water, it is necessary to apply it in conjunction with the tap in the ratio of one to two.

Melt water or from a well

There is an opinion that the melt water is absolutely pure, and its use for the iron does not harm its work. Unfortunately, this is not the case. Still, it is wildlife. Such liquids contain organic substances that not only can stain the fabric or contribute to the appearance of scale, their use can adversely affect the operation of the device as a whole. Therefore, to pour melt or water from the well is extremely Not recommended.

Using an iron without water

Can I turn on the iron without water? If you do not have a suitable liquid on hand, and you do not want to spoil the device and use the one that can impair its operation, use the “no steam mode”, it is on most modern devices. In order to work with an iron without water, it is enough to turn it on, set this mode and start ironing.

Remember that in this case you can not iron all the products.

Conclusion

So, so that you do not have to throw a good iron into a landfill, you need to pour into it either filtered water that you drink or diluted with distilled or demineralized. With proper use of the device, it will serve you faithfully for many years.