Self cleaning washing machine

Sooner or later, any automatic machine will accumulate pollution and will require cleaning. You can understand this by the appearance unpleasant smellresembling a rotten swamp mud, and deterioration of heating functions. Many do not know how to clean their own washing machine from dirt and rush to contact the experts, or even buy a new one. But in fact, it is not as difficult as it seems at first glance.

Chief Helpers

First you need to decide what exactly You will clean your washing technique. Of course, you can buy expensive chemicals, but it is not at all necessary.It is better to turn to the experience of generations and use proven tools, such as:

• lemon acid;
• chlorine bleach;
• baking soda;
• vinegar.

Lemon acid

A tool widely used in the household is used to clean sanitary ware, and is also great for washing machines. In combination with water, citric acid dissolves scale, grease and mold deposited on the parts. Read how to clean your washing machine with citric acid. here. For one time, enough 200 grams of cleaner. Also advantages of citric acid include:

• low cost;
• the equipment is cleaned automatically;
• slight risk of harm to parts.

However, if you are dealing with a thick coating of salts, citric acid alone is not enough, more powerful helpers are needed here.

Chlorine bleach

Bleach containing chlorine is considered the most effective tool in the fight against dirt. Whiteness is perfect for equipment that has not known cleaning for many years.

Main advantages:

• affordability;
• excellent result.

If you exceed the dosage - which is 250 grams at a time - then chlorine can spoil the rubber parts.

Baking soda

Excellent cleaning powder for the walls of the drum, however, the tank and the heating element cannot be cleaned with soda. All cleaning methods for washing machine soda are described. here. Positive characteristics:

• availability;
• harmlessness for details.

The disadvantages include, perhaps, the need for manual cleaning.

Acetic acid

Vinegar cleaning - Another one of the most popular and affordable methods of getting rid of dirt and plaque. For the insides of the machine, concentrated acetic acid can be used in proportion 50 ml per 150 g of water.

Pure vinegar essence cannot be used!

Benefits means:

• low cost;
• effective cleaning of parts.

Once the products have been selected and prepared for use, you can proceed to the cleaning procedures.

Bath day for the drum

In some washing machines, for example, LG, there is such a function, thanks to which the drum can clean yourself. You only need to press a button and the program will do everything itself, but if this is not your case, use another method. All of the above tools are ideal for the guidance of cleanliness in the drum.

Any of the listed acids, except soda, should be applied as follows:

1. Place the product in the drum.
2. Choose a temperature of 60 degrees.
3. Include the maximum washing time.
4. At the end of the program, perform a double rinse to remove residual matter.

As for baking soda, it is used in another way. Wash the walls of the drum with hands and powder. It is worth rubbing until the dirt begins to dissolve. Once the process has started, it is better to wait about 30 minutes, and then finish the cleaning. After cleaning open the door - for quick drying of the drum.

Drain filter

In the process of cleaning the washing machine need clean and filterbut many do not know where he is.

If you do not understand the situation, you can give a decent amount for repairing the car, although in reality only the drain filter is clogged up.

It is located below, on the front side of the machine behind a small square cover. If such a cover was not found on your model, then in this case a narrow plastic part should be removed. The panel is secured with snaps, they open when pressed by hand, if this does not happen, carefully unscrew them with a screwdriver.

The filter is like a cork screwed into a washer. It is easy to unscrew it: you need to take a special notch and turn it clockwise. If the part is fixed with a bolt, use a screwdriver.

Before you pull out the filter, put a small container under it: leftover water may leak out of the hole.

Immediately behind the cork you will see all the accumulated debris - buttons, hair, husks, everything that gets into the drain after washing. Wear gloves and get rid of unnecessary items. You can even shine a flashlight into the formed tunnel and clean out the dirt from there. If the filter has not been cleaned before, be prepared for a rather unpleasant smell to strike your nose.

At the end, wipe the drain element with a dry cloth and put it back in place. It is recommended to put the drain hole in order after each washing or at least 2 times a month.

Department for powder

In this tank, despite the fact that it constantly passes powder through itself, black plaque, mold and fungi accumulate over time. All this falls into the drum, and from there to the linen. How to clean the department for detergents from dirt?

1. Remove the tank from the machine.
2. Use a sponge, an old toothbrush, and ordinary laundry soap to remove dirt.
3. Chlorine left in the tank for a couple of hours will help to get rid of plaque.

In order to prevent it, it is recommended to rinse the part approximately after every 4th wash.

Tubular Heater

Heating element - the most frequent part of the machine-breaker. Often this happens if water from your tap is flowing with a high level of "hardness". In such water, the number of impurities of metals, salts and rust above the norm. As a result, a white scale build-up accumulates on the electric heater. On the failure of the Teng will be known in the event of a sudden shutdown of the machine. But this trouble can be prevented with citric acid and vinegar.

Lemon mode

Well-known lemon will cope with the task perfectly. The amount of agent depends on the degree of scale on the heating element. Approximately, on a machine with a load of 5 kg, you need the same amount of citric acid packets. Most of it should be placed in the powder tank, the rest in the drum. Adjust wash mode with temperature 90-95 ° C. When draining the water will go the whole pieces of scale. It is recommended to use this method 2 times a month.

Aggressive way

The second method is less popular than the first, but many hostesses recommend it. Acetic acid is more aggressive than citric acid. With frequent use of vinegar, rubber elements are affected, but it copes with scale quickly. The tool is poured into the hole for the powder, in the amount of 50 ml. Otherwise, everything should be done, as well as with lemon.

If you regularly clean the washing machine, your equipment will be in excellent condition and will serve you for many years.