Malfunctions of washing machines BEKO

Like any other equipment, the equipment of the company VEKO is not eternal, and it breaks, as usual, at the most inappropriate moment. Washing machines are no exception. It is considered that the VECO technique is completed with not quite high-quality components, such as a control board, temperature sensors, and a relay. Let's look at what constitutes the eyelid washing machine, and its main problems.

Breakdown classification

All the faults of the washing machines of the master are conditionally divided into two groups - these are external and internal. The first group includes those that appeared as a result of mechanical action and are associated with violation of the integrity of the body:

• cracks in the glass of the hatch,
• scratches and dents on the case,
• breaks of washing mode switches, hatch handles, etc.

Internal malfunctions of the VECO washing machine include problems related to the electronic control of the unit and various mechanisms.

Common Problems and Their Elimination

If we take into account the experience of the masters of service centers, it will become obvious that WECO washing units are most often subject to the following types of breakdowns:

• clogging of the drain system or breakdown of the pump;
• failure of electronic systems and modules;
• breakdown of water heating elements;
• leakage of water lines;
• malfunction of electric motors, breaks in the drive belt;
• the presence of extraneous noise during operation.

Some of them are quite possible. fix by yourselfwithout even having special knowledge. Consider a few examples of faults and how to eliminate them.

Bad water discharge

Let's say it originated water drain problem. It is known that wastewater after washing has many impurities and organic pollution (hair, particles of matter, etc.). Add to this items, accidentally left in the pockets of clothing. And in order that the dirt does not accumulate in the pump, a filter is installed on its way, which is clogged and does not let water through.And you can solve this problem as follows:

• should be found in the car drain filter (it is located in the lower part);
• unscrew its cover, substituting a pre-tank for draining water;
• remove the filter, rinse the part under running water;
• without installing a filter, check the functionality of the drain pump;
• set the filter element in place.

Vibration unit

For example, when a washing machine is operating, especially when spinning, the machine starts strongly vibrate and jump in different directions. First of all, you should pay attention to load mass. If it is exceeded, such a vibration is possible. The second thing you need to pay attention to is the correct setting of the support legs of the unit. They must be set to the level that the machine is not loose. In addition, when installing the unit it is recommended to use special anti-vibration stand.

Bad water supply

If you notice that the water is slower than usual in the washing machine tank, first of all, you should check whether feed hose filter. To do this, unscrew itself water supply hoseRemove the filter and rinse it under running water. Put the filter back and check the operation of the unit.

I would like to warn that not all problems can be fixed by yourself. It often happens that in order to fix a breakdown, you should contact a specialist for help - an unqualified approach to repair can only harm the unit.

Common causes of faults

Considering all the faults of the eyelid washing units, it is worth noting that the drainage system and the pump are subject to more than other parts. This is usually due to the ingress of foreign objects and clogged hoses. During the operation of this unit often and in the drum get extra items that cause malfunctions. Unit can gaining momentum badly, there are extraneous noises, drum bangs, a big vibration. But such “symptoms” can also cause bearing wear. In this case, the operation of the washing machine becomes unstable, and you should contact the master to fix the damage.

The number one enemy of “styralok” is hard water flowing through water pipes. Because of this water in the hoses are formedlime depositswhich interfere with the stable operation of the drain system. In addition, the lime is deposited on the heating element, which significantly impairs its functioning, and eventually it completely disables it. To avoid this, you need to periodically clean the washing machine from scale and use special tools for example Calgon. When operating the machine, often water gets on the electronic controls, which causes them to malfunction. Such cases are accompanied by smoke, the unit may spark when turned on, the display disappears, or the machine simply does not turn on at all.