Why does it smell unpleasant from a humidifier and steam does not flow

The high-quality ionizer can work without overlays for many years. But any technique can break at any time. Then it becomes important to diagnose the cause of the fault. For example, no steam comes out of your humidifier at all, or an unpleasant smell emanates from it. What to do in such situations?

Many problems of the humidifier can be corrected by yourself, but in serious situations it is better to contact the specialists.

What types are

To understand what could break in your machine, you need to know the basis of its work. There are several models of humidifier:

1. Steam Apparatus - work on the principle of evaporation of water from the tank. The heated water begins to evaporate and settle in the air of the room.
   
2. Traditional cleaners - work on the principle of suction air flow ventilation system. After passing through the cleaning system, the air is enriched with water and disposed of.
   

3. Ultrasound models - create powerful vibrations that break up the water molecules.
   

If you understand the principle of operation of your device, then it will be much easier to find out the cause of the problems.

How does the cleaner

The device of a humidifier may vary, depending on the principle of its operation and the complexity of the configuration. Especially it is necessary to understand the device steam and ultrasonic device.

Steam

Such devices may have a different appearance, but the internal structure remains unchanged. It consists of a water tank and an electronic component:

1. Cooler for sampling air masses.
2. A heating element.
3. Administrative unit.
4. Built-in generator.

Steam Humidifier Device

Ultrasonic

Both externally and internally, these devices are different from steam. The device includes an ultrasonic device:

1. Electronic component.
2. Battery.
3. Amplification unit.
4. Ceramic emitter.
5. Ventilation system.

Ultrasonic Humidifier Device

It is better to buy a more expensive and high-quality model of a trusted manufacturer than to choose an inexpensive one and then overpay for repairs.

Emerging issues

Device failure is always unpleasant. In some cases, the problem can be solved by ordinary cleaning. In others, you will have to contact the service center. The following are considered the most common problems in cleaning technology.

Moisture. This can happen both by chance and because of your fault, for example, when the instrument is not properly washed. With such a problem it is better to contact a specialist, as electronics can suffer.

There is no steam. Steam can not go for several reasons:

1. Damaged generator.
2. Oxidized contacts.
3. The fan has failed.
4. If it is an ultrasonic cleaner, then the membrane could be damaged.

No water supply. If your device is working properly, then the water in the tank gurgles. If this does not happen, then there may be several reasons:

1. Out of order emitter.
2. The closure of the water level sensor.

Unpleasant smell. If your device has the smell of mildew, then it must be urgently disinfected. This could happen for several reasons:

1. Bacteria started in the device.
2. Due to the untimely change of water, she began to bloom.

If you do not use the appliance, it is necessary to drain water from it. In stagnant water, bacteria can start.

There is no air. While working, the humidifier pushes the air out; if this does not happen, then your device has broken:

1. The filter is clogged and needs to be cleaned.
2. The fan broke.
3. The engine burned out.

Operating rules

To avoid equipment breakdowns, it is necessary strictly follow the instructions. When handling air humidifiers, remember:

1. It is necessary to fill in water only through a special opening.
2. The cleaner is not an inhaler, and one should not bend over it as if it were a pot of potatoes.
3. Vinegar can be used to disinfect the device, but the treatment is best done with the windows open.
4. Do not place the unit near other equipment.
5. If you want to check the device, do not forget to disconnect it from the network.
6. Do not cover the humidifier.
7. When installing, make sure that the access to the air is not blocked.
8. Do not touch the humidifier with wet hands.

Conclusion

In certain situations, you can repair the humidifier yourself, for this you will need to clean the device.But in the event of a breakdown of the electronics, it is better to place the device in the hands of a master. The main thing is to follow the rules of operation, then your equipment will serve you for a very long time.