Several ways to clean the humidifier

The humidifier helps to create and maintain a favorable atmosphere in the house. It fills dry air with necessary moisture, which has a positive effect on our well-being and performance. To ensure the smooth and high-quality operation of the device, it is necessary to carefully care for it. Consider how you can clean the humidifier at home.

Why is the humidifier polluted

Cleaning a humidifier is an indispensable component of a complex procedure for maintaining its efficiency. The cause of pollution lies in the principle of operation of the device and depends on the version of the selected model.

Steam humidifiers work by analogy. with electric kettle - in the process of boiling water is converted into steam. When combined with air, steam significantly increases its humidity. When boiling, however, salts and other mineral compounds do not evaporate, but are deposited, forming a solid limescale on the heater.

Plaque is not just an aesthetic nuisance, its presence significantly affects the performance of the device, reducing its heating function and contributing to breakage.

The principle of operation of ultrasonic devices is somewhat different. Special membrane through the generated ultrasonic vibrations breaks water for small particles that are mixed with the ambient air, salt is deposited on the surfaces of the room (walls, furniture), and on the internal parts.

The mechanical version of the humidifier works through the creation of a flow of air based on the contact. with wet cartridge, forming a process of evaporation of moisture. Again, all mineral salts remain in the cartridge, it becomes clogged and, as a result, the device fails.

Cleaning procedure

Regular cleaning

With regular use of the humidifier, it is necessary to clean it at least once a weekby rubbing and removing deposits. The procedure begins with pouring out the rest of the water from the tank and thoroughly drying the instrument. Try to avoid direct sunlight.

It is better to avoid the use of chemical detergents and cleaning products, since small particles of such preparations can spread later on throughout the room, adversely affecting both the state of the surfaces and the well-being of family members.

There is a certain set of special products that manufacturers can recommend for cleaning, you can use them in case of heavy contamination.

Soda is used to get rid of unpleasant odors and remove small contaminants. Serious contaminants can only be used with special solutions and powders. metal sponge. Since the probability of damage to the housing of the device at the same time is high, you should not abuse this tool, it is better to prevent the appearance of serious deposits through preventive cleaning.

The nozzle of the device is regularly covered with scale, which must be removed.When answering the question of how to clean a humidifier from scale, do not forget that in this case it is impossible to use harsh detergents in any case, they can ruin the nozzle, and later an expensive repair procedure will be required. As a rule, use special tools that can also be successfully replaced acetic solution: swab moistened and rubbed them with a nozzle. After this procedure, you can fill the humidifier with water and run it.

To prevent the multiplication of various microorganisms using a solution of chlorine. After its application, it is necessary to rinse the device under running water.

Cleaning the humidifier from mold

There are several ways to clean a domestic air humidifier from mold:

1. Using a bleaching agent or chlorine solution. A teaspoon of chlorine or bleach is diluted with 4.5 liters of water and poured into the tank. The solution remains in it for an hour, after which the tank is thoroughly rinsed with running water.
2. With the help of vinegar. 4-4.5 liters of water is diluted with a glass of vinegar and left in a running device for an hour. To avoid a sharp odor, it is recommended not to perform this procedure at home.In extreme cases, after it is required to ventilate the room well.
3. Peroxide. Several glasses of the solution are poured into the container and left in it for an hour. Peroxide must completely cover both the bottom and the wall.

To prevent mold, clean the humidifier. soda and lemonat least once a week, and also use distilled or well-filtered water during the operation of the device.

How to clean the Boneco humidifier

Consider the procedure for cleaning known models from the company Boneco.

The manufacturer advises to use a special cleansing composition that requires dilution in warm water in a ratio of 1 bag per 1 liter.

The procedure itself is as follows:

1. The device is released from the remainder of the liquid.
2. The tank is filled with a portion of the prepared solution, and the lower compartment of the device with a portion.
3. The procedure for cleaning the tank is carried out with a soft brush.
4. The bottom compartment does not need to touch for 3-5 hours.
5. Both components — both the tank and the lower compartment — should be washed with running water.
6. The device is assembled and put into operation.

As you can see, cleaning a humidifier from plaque, mold and scale is not such a difficult task that anyone can handle. by myself. Of course, you can ask for help from specialized service centers, but their services can cost you a fairly large amount, equal to the third part of the cost of the device itself. Is it worth it in this case to pay, you decide.

Whatever decision you have made regarding the choice of maintenance method for a device, remember that only high-quality prevention of serious contamination through regular flushing of the system can ensure long-term operation and a high level of functionality provided.