Why choose a geyser from Ariston

The Italian equipment of the world famous brand Ariston is widely used by Russian consumers, and gas water heaters are no exception. In order to provide affordable equipment to the market, equipment production has been established in China. The geyser Ariston is adapted under our service conditions, and also all technical standards are observed. This allowed the company to gain the trust of a wide range of customers.

Characteristics of the brand columns

The column from the Italian brand has a classic design and a fairly compact design. The use of European technology ensures the reliability and safety of the device, if all the rules of use are observed according to the instructions from the manufacturer.

All models, without exception, are equipped with a gas monitoring system, overheating protection, temperature sensors and thrust. This built-in functionality ensures the safety of operation of the device in case of an emergency in the central water supply system or gas pipeline. The thrust sensor will allow you to turn off the speaker if, for example, you forgot to turn it off before a long trip.

It should be noted that from production the equipment is delivered with test settings based on standard operating parameters. Given the characteristics of the initial operating conditions (gas pressure, water pressure), it is important to adjust the device. This can be done independently using the instructions.

If you have doubts about your own abilities, you can always contact a service technician. Properly tuned equipment will provide comfort during use, as well as extend its service life.

Positive and negative aspects of the device

Based on feedback from customers with experience using the Ariston gas column, a number of advantages and disadvantages can be noted. So, the main advantages of the Italian gas installation are:

• the ability to stabilize the temperature of the water in different operating conditions;
• noiselessness of the device - there are no extraneous clicks during ignition, as well as during operation of the device;
• the use of modern European technologies and instructions in the manufacture and assembly;
• attractive appearance;
• resistant to heat copper heat exchanger.

Despite the popularity of the brand, there are also negative points in the technique.

1. At water pressure reduction the device turns off. This is a big drawback for using them in high-rise buildings, especially for owners of apartments on the upper floors.
2. Distrust causes durability of used components, as there is a Chinese assembly.
3. Expensive parts. In case of failure of individual nodes, it is more profitable to buy new low-cost gas equipment of lesser-known manufacturers.

When choosing a technique, it is necessary to take into account the priority technical characteristics, which must be mandatory, as well as your budget for the purchase. Buying inexpensive models up to 10 thousand rubles, you should not hope for its durability.Reliable, wear-resistant components, as well as the use of additional blocks of safety and control will ensure a long service life, but the price range is much higher.

The most popular Ariston geysers in Russia

There are several popular models of the Italian brand, which have gained confidence and are actively moving into the Russian market of consumers. These are gas water heaters of the Fast Evo, Marco Polo and Superlux series. Actively discussed on the resources of the Internet network and are the most purchased the following models.

1. Gas water heater Ariston Fast Evo. The column is available with a capacity of 19 and 24 kW, the hot water capacity is 11 or 14 l / min, respectively. According to the manual, this series is an automatic column having an electric ignition function using two batteries. To maintain a constant water temperature in the faucet, the device is equipped with a flame modulation system. On the control unit there is a manual temperature switch. In models of category C on the front panel is a digital display that allows you to control the set parameters. If the setting is incorrect, the error code will be displayed on the screen.which allows using the instruction to correctly adjust the column to the required level of gas pressure and water pressure.
   
   

   Column Ariston Fast Evo

2. Model Ariston Marco Polo Gi7S is a turbocharged gas flow heater. This appliance does not have a chimney. To ensure the operation of the column, it is necessary to bring the exhaust pipe to the street: you can remove the combustion products from the gas device through a window or by making a special hole in the wall. According to the instructions, the installation of this type of column should be carried out upon obtaining permission from the gas supervision structures.
3. Geyser Ariston Marco Polo Gi7S 11L FFI has a closed combustion chamber and is more powerful - 22 kW. It is made in a modern style with a metal case. Control takes place via a display on the panel, and ignition is carried out automatically.
   

Depending on the conditions under which the column will be operated, its type, power and design will be chosen. Models of Italian gas water heaters are diverse and will be able to satisfy individual customer preferences.