Gloss-glass sterilizer - the choice of modern beauty salons

If the processing of manicure tools in the beauty salon will be done carelessly, or the specialist ignores it altogether, this may adversely affect the patient's health. It can pick up a fungus or, even worse, get sick with hepatitis, AIDS. To prevent such consequences in the field of the beauty industry, a glass-glass sterilizer is used for manicure instruments: scissors, nail files, forceps, and so on.

Types of devices for processing salon tools

There are several types of devices, the purpose of which is to sterilization tools for manicure and pedicure. Among them only glossperline and ultraviolet meet the standards of sanitation.

Ball sterilizer (autoclave) is considered the most reliable and simple among all sterilizers. With it, you can destroy almost all pathogens from the surface of manicure tools. What, unfortunately, can not be said about ultraviolet sterilizers. Applying the latter, it is possible to disinfect only scissors and other manicure devices. Because they do well with fungi and germs, but they are not able to destroy the viruses of hepatitis and AIDS. Therefore, numerous beauty salons use GlossEllen glass sterilizers from ThermoEst.

What is glossper sterilizer

The shape of the device can be absolutely any: round or rectangular. It does not affect the functionality. The inside of the sterilizer is made of metal capable of withstanding high temperatures. The outer shell is made of high quality plastic. Many people call the glassperic device a ball sterilizer, because of its filler, which consists from quartz balls. The container where the tools should be placed for processing is surrounded by heating elements.They are able to heat up to 250-330 degrees in a short time.

Principle of operation

The principle of operation of the device is quite simple. After turning on the apparatus, the quartz balls located around the bulb will begin to heat up to about 230 degrees. Hairdressing tools placed in a container are exposed to high temperatures. Due to this, all pathogenic microbes and viruses die.

Handling in the unit is allowed metal products of small and medium sizes, such as scissors, tongs, files.

The device can be sterilized instruments used not only in beauty salons, but also in dentistry. These can be dental drills, drills, needles and other products.

Half an hour before the start of the treatment event, it is necessary to fill in the apparatus with a filler, glass balls and press the "start" button. A light bulb on the appliance indicates that the heating process has begun. After the specified time, or when the indicator goes out, you can load a tool into the container that requires processing for a while. less than one minute. The device cools down for a long time.Therefore, the disinfection procedure can be carried out several more times, but with other products, until the unit begins to cool.

How to apply

Instructions for use glasperlenovyh devices reads:

1. The maximum time of sterilization of one batch of instruments should not exceed 40 seconds.
2. Processing subject to metal products that have been pre-cleaned and dried.
3. At least once a year should be replaced quartz beads (with regular use of the device). Otherwise they will lose their effectiveness. The process of heating them will be less rapid and of higher quality.
4. The instrument to be sterilized should be used immediately upon completion of the procedure. This will help prevent the appearance of harmful microorganisms on products.
5. The sterilization process should be carried out only with a tightly closed device lid. Such a safety measure will help prevent accidental injuries, burns.

Advantages and disadvantages

The use of glass sterilizers, like any other technique, has positive and negative sides. The main disadvantage of such devices can be identified only their high cost.

Despite this, many give preference to just such devices for their positive qualities:

1. Instruments subjected to sterilization in glass-glass devices do not become blunt and are not susceptible to corrosion. What can be said about other methods, such as boiling or soaking in disinfectant solutions.
2. Due to the compact size of the device consumes a small amount of electricity.
3. Sterilization of one batch of instruments takes about 30 seconds. This makes it possible to process several sets of products in one cycle.

Elite beauty salons without fail use special units for sterilization of working tools. After all, safety for these institutions is in the first place, and ThermoEst instruments are effective assistants in solving sterilization problems.