Unusual and original drill nozzles

Electric and hand drills were created to drill various holes in any material. But it is worth adding a little fiction and ingenuity - various nozzles on a drill appear, with the help of which this mechanism turns into a unique and rather universal hand tool.

We work at an angle

Nozzle rotary Twister is designed specifically for the convenience of working in remote places during the repair of an apartment, private house, farms. With this ingenious device you can quickly turn the drill into a screwdriver, and tighten the screws in the most inaccessible places.

The kit includes:

• special swivel head;
• 16 types of nozzles for cross and slot (8 + 8);
• two nozzles for the drill;
• wrench for fastening nozzles;
• plastic container for storage and transportation.

All nozzles are made of durable carbon steel, and a container of ABS plastic.

Important! All drills from the kit can not be used for drilling walls of bricks and metal structures.

To help farmers

Drill attachments are also used to pluck poultry on private farms and by many villagers who feed the poultry for subsequent slaughter and sale. Such devices on the drill for plucking are produced in Russia, Ukraine and the Middle Kingdom, but perosemny nozzles Chinese-made inferior in quality and reliability, but on the pricing policy can not speak.

For those who are interested in this issue, there are several recommendations that will be useful when buying similar products:

• all nozzle is made of stainless steel;
• guarantee of at least ten years of trouble-free operation;
• special rubber or rubber fingers are easily replaced (spare wheel included);
• detailed instructions are attached to the nozzle.

Advantages:

• saves time - processing 1 carcass about 3 minutes;
• saves money;
• saves power - no need to scald with boiling water or singe on the fire;
• unique mobility - you can work in any place where there is access to electricity.

However, there is always a risk of damage to the skin of a bird with little experience.

Nozzles on the drill is not only to pluck the pen, but also for cleaning fish. They are used by farmers engaged in industrial breeding of fish, followed by delivery in a form free from scales and viscera. These nozzles include constructions called "Ruff" - they are widespread among farmers because:

• made of special medical steel;
• suitable for birds and fish of various sizes;
• are lightweight;
• reliable in operation.

The following modifications are available:

• Ruff-1 with a diameter of 85 mm;
• Ruff-1U, with a diameter of 120 mm for large birds and fish;
• Ruff-2 with a nozzle diameter of 110 mm for birds and fish of any size.

Engraving tool

Home engraver - this type of hobby captures many craftsmen: you can sign a crystal original sugar bowl or a large gift cup on your own.It's not about saving money, it's just that many artisans love to do everything with their own hands. Having gained experience, you can not only sign gifts from different materials with the help of a mini engraver, but also paint the original crafts for the future present yourself.

For an amateur engraver, the quality of the tool is very important: having a mini-drill is not the main thing, but to buy a set diamond cutters for engraving at home - this is a great success. Diamond nozzles are used to work on all types of metal, artificial or natural stone, you can work with tiles, tempered glass, creating masterpieces with their own invented ornament and plots.

The work of a home engraver without devices for subsequent polishing does not make sense. Some craftsmen adapt home-made nozzles to an ordinary drill, others prefer special kits, where there are already various tools for perfect polishing of any surface. To polish any coating, useful nozzles with abrasive materials and felt circles. The nozzle itself is made in the form of a rotating flat surface, on which interchangeable circles of emery paper or felt smeared with GOI paste are mounted with a velcro on the back side.

Engraving can be done on wooden crafts, which only adds to their piquancy.

Strobe the wall

During repair, many have already encountered such a problem, when it is necessary to send a wall from a switch to an outlet or vice versa. If you have an electric drill, then this is no longer a problem - use alternately a drill or short drill bit and a special spatula. First, drill holes at a distance of 10-15 mm, with a depth of at least 25 mm, then use a paddle device with a spatula, but the view will not be attractive enough. For professional devices in construction is used wall chaser, but at home you can easily do everything with a drill or punch. For a visual lesson this video is useful to many:

Drill mixer

Nozzles for mixing the solution of any consistency are used in construction everywhere - you can interfere with paint, wallpaper glue, mortar for plaster, masonry bricks or homemade concrete of small volume. Therefore, the configuration of drill bits for an electric drill or a more powerful perforator is so varied: for mixing glue or various paints, they are of an original form and lightweight design, and for mortar they are more durable and tough,but they all allow for uniformity in a very short time.

Nozzle pump

So what exactly can not be done with a drill, so it is pumping fluids - say the experienced homemade craftsmen and will be wrong. There are various attachment pumps for the drill, which are installed in the cartridge of the product - they are used to pumping fluid over short distances. For example, it is necessary to pump out of the barrel of paint or dirty water from the flooded cellar. The speed of rotation of the drill is easily adjustable, which means that you can change the pumping speed. An ordinary drill is not suitable for long-term work as a pump, but it is not required of it.

Such nozzles are made of durable plastic - their service life is small, but the price is reasonable.

As you can see from the photo, they all have two nozzles, to which the hoses are attached for pumping out various liquids.

Earth drill

With the onset of spring in the country or in the garden, active work begins: it is necessary to dig up a mass of pits for planting trees or renovating the fence. In this case, the nozzle for a drill in the form of an earth drill, which can be made independently or with the help of friends working at the plant, is useful.The design is quite simple, you can buy the drill in the store “garden and garden”, and then only think over drill adapter. Those for whom this is relevant, will help the video:

Fill the foundation

Who lives in the private sector, he constantly builds something: a more spacious greenhouse for vegetables and seedlings, a bathhouse on the edge for lovers of steam rooms and the like. And for a high-quality foundation, and just for concrete, a vibrator is needed, which allows it to sit in the process of solidification. There is a convenient model vibrator for concrete shrinkage on the basis of the nozzle on an ordinary hand drill, but more power. Such a product is used for self-pouring the foundation and other monolithic structures made of concrete.

The principle of operation is based on converting the speed of rotation of the drill shaft into oscillatory movements, and the effect is achieved by using a nozzle with an offset center of gravity, which is placed in a self-made sleeve of a sealed piece of steel pipe with a diameter of 30-50 mm and at least half a meter long.

Very important! By changing the frequency of rotation of the rotor, you can adjust the amplitude of oscillation of the entire device - the drill should be adapted for long-term work, its power should be more than 650 W.

Security measures when working with nozzles

All types of nozzles on a hand drill involve working at high speeds, so special attention should be paid to the strength of their fixation in order to avoid injuries working with the drill, as well as others.

1. The device should not be used by persons under the age of 16 and people with limited physical and mental abilities.
2. Keep the device in places that are inaccessible to children.
3. Be sure to use when operating protective glasses.
4. Do not use the product in places with fuels and lubricants and paints.
5. Before starting work, make sure that the device itself is securely fastened in the drill chuck and nozzles.

Accurate implementation of all recommendations will protect you and your loved ones from getting injured while doing work.