Cleaning the kettle from scale by simple means

The formation of scale on the inside of the electric kettle is a natural result from the use of hard and non-filtered water. Stone deposits need to be cleaned regularly, they contribute to the proliferation of bacteria, and small flakes will inevitably enter the body along with the drink. To maintain cleanliness, users are advised to know several effective ways to clean the electric kettle from scale, because a large amount of sediment damages both the equipment itself and health. There are many options for how to clean the kettle from scale in the home with improvised and inexpensive means. If we consider that the sediment forms quite quickly, it is clear that everyone’s desire to find an uncomplicated and financially accessible method for removing scale in a kettle.

Method number 1. Powdered citric acid

The most affordable option, how to clean the kettle from scale in the home - use regular, powdered citric acid. Capacity up to 3 liters will be enough one bag, and for a volume of 1.8 - 2.0 liters, half is enough. Citric acid should be poured into water poured to the top mark, after which you should boil a kettle, preferably at least two times. All stone deposits are simply dissolved in an acidic environment.

You can also remove scale from citric acid at work, for example, in the office. A simple tool does not emit any odors, does not take up much space in the drawer.

This option is considered quite effective, but aggressive. Boiling water with citric acid is still an extreme measure for a kettle, when it is necessary to bring an appliance in short order. A softer and more gentle method, how to get rid of scale in a kettle - get fresh water in it to the maximum, pour out the powder. In order to soften lime deposits, the solution should stand for at least 4 hours.Perfect for this purpose and fresh lemon slices. Put them in clean water and boil well, then you need to turn down the heat and "cook" the fruit for about 25 minutes. After you have cleaned the kettle of scale and scale, it should be rinsed well under running warm running water.

Method number 2. How does soda

Household or baking soda is very popular among the population, because its scope is quite wide. Multifunctional cleaning agent is widely used for softening of lime deposits. If you decide to clean the kettle of soda limescale, fill it with fresh running water to the maximum set level, after pouring 1 tsp. household soda ash or baking soda. Boil to keep the surface clean. The resulting solution should stand on low heat for half an hour. After cleaning, rinse the container, boil again and drain the water for the final rinse. So you completely remove all traces of powder.

It is not recommended to use this method for electrical devices.

It is allowed to use soda as soft abrasive cleanser for descaling.If there is not a lot of deposits, one teaspoon is enough. In addition, household soda perfectly cleans the soot from the gas stove, but it should be used carefully so as not to spoil the surface.

Method number 3. Carbonated drinks

Since it is not always easy to get rid of scale in the teapot, users began to look for new effective methods, which include soda drinks. The secret is that these drinks contain a component such as phosphoric acid, which makes soda an excellent means for removing scale from the kettle.

The peculiarity of the non-standard method is that highly carbonated beverages should not boil. This option is not quite suitable for getting rid of scale in an electric kettle, but you can simply periodically turn the device on and off, controlling the temperature of the liquid. Before you can descale the kettle using any carbonated drink (Coca-Cola, Fanta, or Sprite), the gas should “exhale” a little. When most of the bubbles come out, fill the liquid to the middle mark and heat to 80 - 90 ° C.

As experienced users write, Fanta and Cola can leave their shade on light elements.Therefore, it is better to make a choice in favor of Sprite - it does not contain any dyes.

Method number 4. Vinegar

To descale the kettle with vinegar, keep in mind that boiling acetic water will spread specific flavor throughout the room.

Manufacturers of household appliances do not recommend using such a method to soften or remove scale in the kettle, as well as containers made of aluminum and enameled coating. But he will cope well with removing old deposits on stainless steel utensils.

When you need to clean the surface of a small layer of scale, pour a third of the kettle with 9% vinegar, and the second two thirds, as in previous methods, with clean water. The solution is boiled and left to stand for 3 to 4 hours until the acids loosen the deposits. When there is a lot of lime, let the container with vinegar boil for no longer than 50 minutes, then wipe the dishes several times from the inside with a soft sponge.

If it is decided to use vinegar for cleaning lime, care should be taken: it is impossible for the acid to remain on the bottom or walls of the dish. When the coating layer is completely removed, you need to wash the kettle, pour clean water twice,boil and rinse several times. Vinegar is one of the most effective methodshow to clean the kettle from scale.

Method number 5. Eco-friendly and safe

This option will appeal to all who appreciate safety and environmental friendliness, even in cleaning products. You can clean an electric kettle or utensil with an enamelled surface and remove a small residue of scale by using peel of potatoes or applesby placing them in a container. Cleaning vegetables or fruits contain a lot of acids that will quickly destroy lime deposits. The procedure is simple, like all previous ones: clean it up with clean water and leave for 1 to 3 hours on average. After that, it is enough to wash the dishes twice.

The tool is perfect for splitting a thin layer of lime from the kettle at home. To completely loosen the old and dense sediment in one procedure will not work, except for several applications in a row.

Method number 6. Use marinade or pickle from conservation

Brine or marinade contains vinegar or citric acid, and they perfectly soften or completely dissolve the plaque. In addition, the marinade will perfectly cope with rust inside the kettle and bring to shine all the metal parts.

Cleaning a kettle from scale with canned pickle does not imply any particular difficulties: pour it into a container, heat it to a boiling point, put it to cool. If one procedure did not bring the desired result, it can be repeated. The only caveat - pickle has a very spicy smellto neutralize it, you will have to boil clean water and rinse the dishes well.

Method number 7. For the most "neglected" cases

Before you remove scale in the kettle, assess the extent of contamination. When the layer of stone deposits is too large, simple methods will not help, or you will have to apply them in stages. If you are looking for an effective method to remove scale in an electric kettle, you can turn to the most aggressive methods.

1. Pour soda into the kettle and clean it with a sponge dipped in vinegar. Acid combines with alkali and has a damaging effect on scale.
2. Use three solutions in turn: First you need to boil water with 1 tsp. soda, then type in clean water and boil a kettle with citric acid, finally hold over low heat, adding 150 ml of vinegar 9%.Before each new solution, be sure to change all the water, and after the procedure, rinse the container well, boil three times and drain clean water. In order to clean the plastic kettle - it is too aggressive method, but for stainless steel is quite suitable.

Method number 8. Effective

If you do not want to delve into the economic wisdom, how to clean the electric kettle from scale, boil the kettle with citric acid or vinegar - stop the choice on special tools presented in the store that remove any deposits. Manufacturers have already done everything themselves: tablets, liquid, abrasive and alkaline substances. Before washing the kettle, be sure to wear protective gloves - many chemicals are too aggressive to affect the skin of the hands.

The use of household chemicals - the best solution for those who think how to clean the kettle from scale with minimal effort. It contains citric, sulfamic or adipic acid, which copes well with even a large amount of scale. The algorithm of action is simple: pour the tool into the electric kettle, following the instructions, and boil it at a low temperature for about an hour.Wash the cleaned surface and residues of plaque with a soft sponge, rinse the device thoroughly, and boil three times with clean water.

According to users, the efficiency of household chemicals can be compared with methods such as cleaning with vinegar or soda. It is worth noting that the cost of store supplies is several times higher than the price of any national life hacking.

Rules for cleaning the kettle

Even in the most neglected situations it is not recommended to remove scale. metal brushes and sponges, mechanically chip off plaque from a kettle with items such as knives or forks. Such harsh methods can seriously damage the equipment, after which repairs will be required.

Choose the most effective methods for sparing, for example, such as cleaning the kettle with citric acid, soda solution or household chemicals. After that, always use a soft sponge: good cleaning removes any residue from deposits on the bottom and in hard to reach places.

Completes the list of rules thorough washing followed by boiling pure water. Do not neglect the latest recommendations - it will protect the body from chemicals, aggressive acids or alkalis.