What nozzles can be used for a blender

In the kitchen of any modern housewife instead of huge combines have long been compact blenders that can cope with a large number of tasks. However, manufacturers went further by inventing various nozzles for the blender, with which the kitchen duties became even easier. It is noteworthy that this innovation was introduced in all the most popular models, including Braun, Philips and Bosch brands.

Types of nozzles

Despite the fact that for different types of blender its nozzles are provided, in fact, all of them are suitable as submersible species and to stationary. They are not difficult to disassemble and rearrange.

An average cost blender can easily cope with mashed potatoes, whipping cream, slicing, etc. (more details - in the article what can blender do).This will be more than enough for daily use at home.

As for large industrial appliances that have the maximum number of functions, in addition to classic dishes, they are able to prepare desserts, smoothies, cocktails, soups, mashed potatoes, and even knead the dough. But they take up a lot of space and their cost is relatively high. The use of such blenders is often limited to the food and catering establishments.

Ease in the preparation of even the most complex dishes is provided by a large number of various nozzles:

1. The main nozzle - "leg" of the blender. This is ordinary chopper, which is located on the leg length of about 10-15 cm. With it, you can easily chop vegetables and fruits. Often the chopper is made of stainless steel.

2. Special nozzle for cutting cubes. Due to the fact that it is used quite rarely, it can be found not in all models. Most often it is used for beautiful cutting salads, or to speed up the cooking process. When using this nozzle, it is recommended to work with boiled vegetables, as fresh products can be hammered into a blender,and then you have to disassemble it and clean it, otherwise the cubes will be uneven.

3. Nozzle chopper. Used in the kitchen mainly for cutting greens.
4. Nozzle whisk. Used for mixing liquids and liquid products, to create creams, cocktails, sauces, etc. The corolla is a classic nozzle and is present in any set.
5. Nozzle for mixing. This includes the combination of the whisk and chopper. Thanks to this, you can make an airy dough or even make minced meat.
6. For grinding ice. Immediately it is worth noting that this nozzle is not suitable for every blender, since its power must be more than 350 watts. This attachment is not very popular, and is most often used in food service establishments and restaurants.

7. Nozzle hook. It is used exclusively for kneading dough, which is why it is also not popular only if the hostess often works with flour.

8. Disk for thin cutting. An indispensable tool that is used for shredding vegetables or fruits. However, this results in the release of a large amount of juice, which may not always be pleasant or convenient.
9. Nozzle for mashed potatoes. It looks like a fine mesh with additional knives, thanks to which a thorough grinding of the product takes place. Puree becomes homogeneous, airy and does not contain lumps.
10. Pump for evacuating tanks. Having special storage containers on hand, using such a nozzle you can significantly increase the shelf life of products.

For home use it is often enough nozzles for cutting cubes and cooking puree, whisk and ordinary grinder. If additional attachments are required, it is necessary to select them based on individual needs.

Thanks to all the above-mentioned nozzles, you can easily prepare a variety of dishes, desserts and drinks: soups, salads, confectionery, desserts, cocktails, etc.

Nozzle Material

Often the following materials are used:

• from plastic;
• from metal.

It is advisable to choose metal nozzles, as they have a longer life. They can safely be immersed in the hot, but their cost is higher. Plastic options are much cheaper, but that’s where their advantages end,since after some time they will become dull, moreover, such nozzles cannot be dipped into hot and they are rather fragile.

Submersible models of blenders can not disassemble, and easily detach the nozzle with just one movement of the hand.

Rules for using nozzles

In order that nozzles faithfully and served for a long time, it is necessary to use them correctly. Components can be purchased separately, as long as they fit the specific type of equipment. It is also necessary to take into account and power device.

The newly purchased nozzle should be well boiled. In order to attach the nozzle to the device, it is necessary to insert it into the main handle. Often, one motion is enough to fix it in the connector.

You must first lay the liquid products, and then dry. In the course of work, it is recommended to periodically shake the device so that they do not get stuck in it.

At the end of the work, you need to disassemble the blender, separating it from the nozzle and rinse the parts under water with detergent, then dry and fold back into the box. Be extremely careful when washing knives to avoid injury.You can wash them in the dishwasher.

It is not recommended to use too hot products. The maximum allowable temperature is 70 degrees. Before shipment to the container, each ingredient must be crushed.

In case you need to chop hard foods or even break the ice, and there is no suitable nozzle on hand, you need to make sure that your chopper is able to cope with it. Otherwise, it is better not to risk, so that it does not become unusable.

Top 5 best blenders

At the moment there is a large amount of equipment on the market of household appliances, so it is very important to choose the best ones:

1. PHILIPS HR1627 / 00
2. BRAUN JB 3060 Tribute
3. BOSCH MSM 66130
4. SCARLETT SL-1548
5. ZELMER ZSB 1400 B (SB 1000)

As you can see, the unquestionable leaders are Braun, Philips and Bosch, therefore, to get the best result, it is better to choose models from these manufacturers.

Brief description of the leaders

Philips blenders (Philips)

Philips submersible (hand-held) blenders are very compact, convenient and light. At the same time, they are in no way inferior to any of the manufacturers and often occupy the first places in the ratings.

Philips kitchen blenders are used as professional equipment to create completely different dishes, even the most complex ones.

The device is able to quickly cut into cubes, make mashed potatoes, beat, chop, etc. Philips Blender can handle a large list of products: hot, cold, solid and liquid. The equipment is recognized worldwide and is very popular due to the ideal price-quality ratio.

Technical features of all Philips models vary: power, number of speeds and other characteristics. The choice of a particular model should proceed from the tasks for which it will be used.

Instruments from Braun (Brown)

Braun has a fairly wide range of products, and the possibility of each individual blender is great: making mashed potatoes, dicing products, using a whisk, making cocktails, fruit mixes, vegetable salads, etc. All this was made possible thanks to high-quality cutting parts, different modes of operation and a large number of nozzles.

Braun is not only stationary blenders, but also very popular submersible models (Multiquick). They are very convenient in work and can be applied even in those places where there is no connection to electricity.

In stationary blenders from Braun, glass or plastic is used as the material for the bowl. Bowl capacity is large enough that allows you to simultaneously mix or shred the required number of products.

Kitchen appliances Braun has a very stylish hi-tech (high-tech) design. The quality of the company at a high level, as evidenced by the large number of positive reviews.

Bosch blenders (Bosch)

The German company Bosch traditionally pleases its customers with high-quality equipment, among which there are blenders. Multipurpose equipment from this company easily copes with a large number of tasks. Bosch blenders work on mashing, shredding, dicing, beating, stirring and grinding. Most models have a unique knife "mixxoquattro", which quickly copes with the tasks.

Bosch focuses on a variety of additional nozzles with which you can work with almost all types of products.

In addition, the Bosch blender practically does not create noise, which is a distinctive feature of the devices of this brand.

Finally

Before the final choice of a blender, it is necessary to clearly define the range of tasks with which it should, in your opinion, cope. It will depend on it blender type, its power and the number of nozzles.

You should not rush on those models that have high power or a large number of attachments you do not need. Pay attention, first of all, to the flagships of manufacturers Braun, Philips or Bosch. These brands traditionally keep the quality bar high. However, the price of such devices is appropriate.