The essence of the error DE on the washing machine LG

Any modern LG washing machine has a specific program code that notifies of any errors, if any. This often scares the owners, because after the issuance of an incomprehensible combination of letters on the display, the unit often stops working. Such a common mistake, like DE, is not an exception and is capable of introducing any user of household appliances into a stupor. But is this problem so terrible as it may seem at first glance?

Code decryption

Before you start frantically dialing the master's phone number, in order to fix this problem, you need to understand in the cause of this error. In some cases, this is quite problematic. In order to understand the root cause, it is necessary to know the decoding of this code.Each manufacturer lays out its own abbreviations and symbols in order to signal the existence of a problem. Manufacturer LG in the error code DE identified the problem associated with the unlocked hatch of a washing machine.

It may immediately seem that the problem can be solved with one hand movement, but this was not the case. Naturally, in most cases this is exactly what is done: the hatch cover just closes tightly, the error disappears and the washing process begins. But in some cases, just making an effort will not be enough.

There are a few root causes:

1. The hook bolt or other part of the door blocking group has failed.
2. The wire clamp or spring could shift slightly.
3. The problem with the electronic control system locking the hatch.
4. The start sensor element in the electric controller broke.

Attention! Only the most common causes of the DE error were mentioned, but there could be others besides them. It is better not to put your washing machine at risk, and immediately contact a specialist with this problem.

How to eliminate yourself

User,faced with such a problem, it can still do some manipulations with its own hands, which in some cases are effective:

1. Washer should be checked for the presence of objects that prevent the closure of the hatch. This can be underwear, or even the rubber cuff itself.
2. Examine the lock hole for the presence of foreign objects, because of which the “tongue” cannot enter.
3. If the hinge hinges are badly worn, then this may also be the reason that the “tongue” cannot penetrate the lock.
4. You can try to open and close the hatch several times.
5. The problem may also lie in the control module. You can check this by simply unplugging the power cord, and after 20 minutes, try turning it on again.

Self-repair of the manhole cover is almost impossible, because for this you need to have certain knowledge, at least, to determine the problem. The hatch lock device (UBL) in some situations simply cannot be repaired, so you have to buy a new one and replace it. Only an expert can cope with this task. Based on the nature of the breakdown, the cost of solving it will be determined, and in some cases it is enough to solve the problem by ordinary cleaning the sensor contacts.

The problem with the spring, clamps or sealing rubber can often be solved independently. They must be returned to the correct position or replaced with new ones.

DE error occurring on the LG washing machine display may be covered in a small control board. In this case, the specialist will clear and disappear all the tracks where there is carbon. This will ensure contact between all components of the board. Replacing the board is possible only if its soldering fails.

Attention! The control board is almost completely filled with silicone for security purposes, you will need to apply a heated knife to remove it.