Disinfection rules for automatic washing machines

During the operation of the washing machine microorganisms accumulate. For bacteria, this is the ideal breeding ground for moisture and heat. To prevent the formation of mold with all the ensuing consequences, it is necessary to carry out disinfection: washing machine requires regular maintenance. We learn how to properly sanitize an automatic washing machine.

What is disinfection washing machine

The constant contact of water with various kinds of detergents leave a raid on the details of the machine. As a result, it may appear not only unpleasant smellbut also a fungus. Disinfection contributes to the disinfection, elimination of germs and bacteria. Their main habitat is a rubber manhole cuff, a container for loading powder, a filter, a drum. If you do not hold cleaning carsthen with the accumulation of waste products of microbes, they will get into the clothes loaded for washing with a stream of water. So, after wearing freshly washed underwear you can detect irritation on the skin.

The stages of cleaning the unit include the following points:

• after each wash, wipe the exterior parts with a dry cloth;
• carry out disinfection with special means;
• remove mold and eliminate odors;
• wash the filter;
• washing and removal of dirt from external parts of the machine.

These activities will contribute to a longer operation of the machine - automatic and maintain it in proper form.

Methods of cleaning the unit

Washing machine care should be carried out on an ongoing basis, as its service life and quality of washing depend on it. Proper processing of the unit includes 2 directions:

• external washing;
• internal cleaning.

Outdoor wash

External wiping is regular and is carried out after each wash, but at least 4-5 days.The process begins with the removal of dust from the housing. If necessary, a wet wash with neutral detergents. You can use dishwashing liquid or any other agent that does not contain alcohol and chlorine. Read about the right choice of cleaning products for washing machines. here.

It is important that the machine was dry. It is necessary to monitor the ingress of water and dry it in time. Otherwise it may corrode the housing and short-circuit the electronics, or current transmission at the time of contact with the metal parts of the machine.

Especially strictly it is necessary to monitor the unit, which is located in close proximity to the washstand or shower.

Wiping the hatch door is carried out first with a damp cloth. Dry rag removes the remnants of moisture, both from the hatch and from the drum. Glass hatch can be washed window cleanerif the plaque could not be cleaned with ordinary water. In the case of regular cleaning, it will not be necessary to resort to the use of detergents, dry wiping will be sufficient.

Internal cleaning

Internal cleaning provides processing of several sectors and is made irregularly.Wash at least 1 time / month to prevent odor. drain filter. To remove dirt, it must be removed and cleaned with detergent under warm running water. If the plaque is not removed sparingly, you can use chlorine-containing liquids. These can be liquids for washing the bathroom and toilet.

The storehouse of microbes is a tray for loading powder and air conditioning. In this place, mold can most often be seen. Washing with water will not be enough. In order to remove all dirt, it is better to soak the tray in water with detergent, and then remove the remnants of dirt with an old toothbrush. Rinse out for disinfection. Domestos.

If the quality of the water is not very good and a lime scale is formed, it can be removed with ordinary baking soda or salt.

It is possible to clean the internal parts during the start of the washing mode with the use of some means for cleaning the machine. You can process the inside of the machine in several ways:

1. Mix 150 ml of bleach and 250 ml of liquid detergent and choose wash program, providing for heating water not less than 60 ° C.
2. Mold and foul odor cleans well lemon acid. For this you need to fall asleep a couple of art. spoons in the compartment for detergent and run the wash mode at the maximum temperature. You can read more about the benefits and dangers of this method. here.

Internal cleaning can be carried out 1 - 2 times in 6 months, depending on the intensity of use of the machine, the number of daily washes.

Disinfection in the process of washing

There are other ways how to clean the washing machine automatic. The unit can be disinfected without the use of chemical liquids. There is a lot modes in washing machinescapable of carrying out with the washing and internal cleaning machine.

If regular washing is carried out on modes with a temperature not exceeding 40 ° C, then in order to get rid of dust mites and a number of other microorganisms, you can periodically wash them on the Cotton program at a temperature of 60 ° C and above. There are a number of models that provide disinfection function. It may be present in the presence of such programs as: "Antimicrobial regimen", "Hygiene", "Boiling", "Steam treatment".Machines with new technologies include cleaning with silver ions or washing with electrolysis.

The operation of the machine at high temperatures already provides for a disinfectant regime, since many bacteria die at temperatures above 80 ° C.

Depending on the capabilities of the machine, the cleaning and disinfection procedure can be carried out according to different schedules. You can alternate washing at high temperature with internal treatment using special blends. But at the same time, it is important to remember that the use of chlorine-containing liquids and abrasive substances is unacceptable for cleaning the outer casing of the washing machine.