Faults of “Ardo” washing machines and their causes

Sooner or later, any washing machine breaks, “Ardo” is no exception. Breakdown can be both typical and rare. With some species washing machine faults “Ardo” with vertical or front loading can be handled by yourself (cleaning the filters, for example), but most problems require the intervention of a qualified professional.

What are the failures at Ardo

The water in the drum has stopped heating. This problem is a scourge of machines with different types of boot (and verticaland frontal). Basically, it happens because of a breakdown of the heating element: a heating circuit often breaks or one of the terminals breaks. Such a breakdown is difficult to fix yourself.The “Ardo” washing machine will be able to return to life only after calling a specialist and replacing the heating element.

Water does not enter the machine. after turning on the machine and starting the wash. This failure is typical only for units with a vertical load. With front-loading machines, this can happen only if you simply forgot to turn the lever that blocks the water. In vertical machines, however, a malfunction occurs due to a valve failure. There can be two reasons: the control unit is broken or the filter needs cleaning. Eliminate the first cause under the force of a qualified master, but to get rid of the second - on the forces of anyone. Read how to clean the filters. here.

During washing in the machine too much water is poured. There can be two reasons for such trouble. The first - self-draining - occurs due to improper connection of the unit to the sewer. The second is a program crash due to a breakdown in the electronics. Self-draining can be “cured” independently, for this you only need to have some knowledge of connecting washing machines, but only the master can save the broken electronics.

Accumulates a lot liquids under the washing machine. There may also be two reasons. The first is the formation of a huge amount of foam when washing, which leaks out, and eventually settles and turns into water. There is such a nuisance, either because of an excessive amount of laundry detergent, or due to loading too many things into the drum. The second reason does not depend on you - it can be a torn cuff (you can replace it yourself with proper skill), damage or improper installation of the hose (it is not necessary to call the master) or flow in the drum itself. If the trouble happened because of the drum, then without the help of a specialist who will repair the unit, it can not do.

Why do troubles arise when using washing machines?

• Inattentive reading instructions, improper use of technology. The body may be damaged during the fall on the unit of a heavy object, the cuff is torn, and accumulation of scale and scale is also possible. You can get rid of the last problem by observing simple rules of care for a washing machine.
• Defects resulting from assembly at the factory. There is a possibility that defective parts were used.

Error codes

In Ardo machines, released after 2000, there is an opportunity to independently diagnose and identify problems.

This will help control module DMPU machine. To start it, you need to close the hatch (by removing all the laundry from the drum), select the thirty-degree washing program, and set the temperature regulator to zero. Turn on and click on various buttons to check the work.

If a problem is identified, the following combinations will be displayed:

1. 1. E00 or E01 - a problem in the sink. It is recommended to clean the filter.
   2. E02 - problems with the discharge and the flow of water. It is worth checking whether the hose is connected correctly.
   3. E03 - the water stopped leaving the tank or it took more than three minutes to drain.
   4. F2 - problems with the temperature sensor.
   5. F4 appears if water does not drain.
   6. F5 - possibly broken water supply filter.
   7. F8 - too much water in the tank. Check valve akvastopa.
   8. F13 or F14 - critical faults.
   9. F6 | F9 | F12 - errors in the electronic module.