Proper use of steamers

Despite the fact that the steamer is no longer a rarity and it is used by a sufficiently large number of people every day, still not everyone knows how to smooth out their crumpled clothes with the help of this unit. Although the capabilities of the steamer are much greater than those of a classic iron, and this is proved by the mass of video in the network. So, how to use the steamer? Let us examine this question in more detail.

Before starting the procedure

Before proceeding with the process, it is necessary to assemble the unit as described in the instructions. Water is poured into a special water tank, but it should not be hot. You can cold, you can warm, but not hot!

Steamers are divided into two groups: working from the electrical network and operating on the battery.

As soon as your home assistant is turned on, the indicator light will inform you. Often, complete readiness for steaming is achieved in a couple of minutes. It is necessary to hold the iron so that it is turned away from you. This is very important, because if you use it incorrectly, you can hurt yourself: the device emits hot steam that can cause a thermal burn.

Before stripping the clothes, you must press the button that is responsible for the steam supply and see how powerful the jet is. If you took the device in hand for the first time and do not know how to use it, it is best to test it. on old clothes.

With smooth movements from top to bottom, steam through the fabric until it is smoothed. It will be enough a couple of movements.

Smoothing things

Consider how using a steamer you can smooth out certain types of things:

• Stripping a dress or shirt should be carried out on a trempel. For best results, pull the fabric down a little. For the collar and cuffs, it is better to use a special board that you need to push under the fabric.
• To steam the pants, hang them upside down.If you want to make arrows, then use the special clips that come with the device: they should be put on him.
• For outerwear, special nozzles are also provided so that you can safely remove lint, feathers, etc.
• For stripping tight clothing that has a lining, such as a jacket, you must use a protective mitten, which should hold the board from the inside.

In addition, using a steamer, you can smooth and clean upholstered furniture, curtains, underwear, and even children's toys. In principle, there are no limitations, there is even embroidery made from beads and lace. After processing, the fabric not only looks neat, but also disinsects it from the majority of microbes that do not tolerate high temperatures.

In order to smooth a very thin fabric, such as silk, it is necessary to reduce power, but before stripping it is better to test the operation of the device on a separate piece of material.

Attention! Processing of long curtains is better to carry out in 2 steps: first, pull one half and iron, and then take up the other.

Secrets of effective steaming

1. Before you start using the steamer for clothes, be sure to read all the available instructions for use and safety.
2. Before starting the process, be sure to wait until the water reaches the required temperature.
3. The iron needs to make only vertical movements.

How to use the steamer: safety

• Use only on clothing and never direct it to living organisms.
• The power cord must not touch hot surfaces.
• It is impossible to carry out topping up of liquid in the tank of the switched on device.
• Do not steam clothes on the body.
• In the event of a breakdown, repair is not possible outside the workshop.
• Do not leave the device turned on without supervision.
• Do not tilt the machine, otherwise boiling water will spill out of the tank.
• Water must be purified or distilled.
• Clean the tank as well as the steam holes from plaque.
• Use a protective mitten during operation.
• It is necessary to store the device only after it has completely cooled down.
• Use only in accordance with the instructions.

Features home use

Steam steam can wet things, so do not hold it over one section for a long time.Especially when it comes to delicate things.

Sometimes users may notice that the device does not cope with too crumpled things or thick cloth, in such cases it is required to hold the nozzle in these places a little longer. At the end of the steaming, turn the iron off, wait until it cools down, then wipe it with a cloth together with the tank and put it in place. The remaining water is drained.

For greater clarity, we recommend to watch the video.